Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.9 Cr
EMD Value
₹3.8 L
Closing Date
6 Nov 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
SR.DEN/III
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil work other than track work.
7 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
Repair and Improvement of Divyangjan Facilities, including Provision of Contrasting Colour Scheme on Structural Members of Platforms, Tactile Pathways as per Latest Circulars, and Other Passenger Amenities at Anand Vihar Terminal (ANVT) in the Section of SSE/Works/ANVT under ADEN/NDLS
NIT-47-2026-27-W-III~NR
NIT-47-2026-27-W-III
Open
Works - General
12 Months
Delhi
₹0
₹3.8 L
15 Oct 2026
15 Oct 2026
23 Oct 2026
47 items across 2 schedules · ₹2,08,49,651.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 144 | 205.45 | 29,584.8 |
| 2 | Concrete of M15 grade with minimum cement content of 240 kg /cum. (Note: permissible utilization of Recycled Concrete Aggregate (RCA) as coarse aggregate and aggregate is 25% each). | cum The fine | 60 | 7,998.95 | 4,79,937 |
| 3 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 1400 | 89.65 | 1,25,510 |
| 4 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 60 | 10,306.2 | 6,18,372 |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 45 | 6,882 | 3,09,690 |
| 6 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 95 | 8,512.1 | 8,08,649.5 |
| 7 | Area of slab upto 0.50 sqm | Sqm | 70 | 4,679.35 | 3,27,554.5 |
| 8 | Area of slab over 0.50 sqm | Sqm | 145 | 4,425.35 | 6,41,675.75 |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), approved make, in all colours, shades except burgundy, bottle green, black of any size approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing white cement mixed with pigment matching shade complete. | Sqm of as 3 in of | 350 | 1,063.45 | 3,72,207.5 |
| 10 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 70 | 3,086.1 | 2,16,027 |
| 11 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 7200 | 142.3 | 10,24,560 |
| 12 | 25 mm thick | Sqm | 350 | 1,706.6 | 5,97,310 |
| 13 | Size of Tile 600 x 600 mm | Sqm | 145 | 1,286.6 | 1,86,557 |
| 14 | 110 mm diameter | Metre | 215 | 319.75 | 68,746.25 |
| 15 | 110 mm | Each | 30 | 119.95 | 3,598.5 |
| 16 | 110 mm | Each | 30 | 309.5 | 9,285 |
| 17 | Providing and fixing precoated galvanised profile sheets (size, shape and pitch corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams sqm as per IS: 277, in 240 mpa steel grade, 7 microns epoxy primer on both side of sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of microns minimum to avoid scratches during transportation and should be supplied single length upto 12 metre or as desired Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size shape wherever required. | iron Sqm of per 5- the 25 in by size and | 720 | 671.55 | 4,83,516 |
| 18 | Ridges plain (500 - 600mm) | Metre | 240 | 450.6 | 1,08,144 |
| 19 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness microns (minimum), including factory painted after bending. | Sqm G 60 | 145 | 1,591.7 | 2,30,796.5 |
| 20 | 1:4 (1 cement: 4 fine sand) | Sqm | 1300 | 294.85 | 3,83,305 |
| 21 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat Special primer applied @ 0.75 ltr /10 sqm | Sqm of | 9400 | 158.95 | 14,94,130 |
| 22 | One or more coats on old work | Sqm | 720 | 86.55 | 62,316 |
| 23 | One or more coats on old work | Sqm | 6450 | 79.4 | 5,12,130 |
| 24 | With cement mortar 1:4 (1 cement : 4 sand) | fine Sqm | 1300 | 462.3 | 6,00,990 |
| 25 | Nominal concrete 1:3:6 or richer mix equivalent design mix) | (i/c cum | 70 | 2,007.1 | 1,40,497 |
| 26 | Demolishing R.C.C. work manually/ mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction Engineer - in- charge. | by cum of | 7 | 2,928.1 | 20,496.7 |
| 27 | Overhead informatory road signage | Sqm | 145 | 5,609.55 | 8,13,384.75 |
| 28 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material complete as per direction of Engineer-in- charge and accordance with applicable specifications. | Sqm etc. | 2800 | 623.8 | 17,46,640 |
| 29 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming IS:15622 of approved make in all colours shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid 20mm thick base of cement mortar 1:4 cement : 4 coarse sand) in all shapes patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. | Sqm to and on (1 & | 1400 | 1,719 | 24,06,600 |
| 30 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 15 | 5,781.35 | 86,720.25 |
| 31 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 15 | 5,540.55 | 83,108.25 |
| 32 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 15 | 5,268.85 | 79,032.75 |
| 33 | 20 mm nominal dia Pipes | Metre | 145 | 275.25 | 39,911.25 |
| 34 | 25 mm nominal dia Pipes | Metre | 145 | 370.65 | 53,744.25 |
| 35 | 250 mm dia. R.C.C. pipe | Metre | 145 | 811.15 | 1,17,616.75 |
| 36 | Circular shape 560 mm internal dia | Each | 15 | 1,882.2 | 28,233 |
| 37 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 720 | 466.3 | 3,35,736 |
| 38 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 350 | 564.8 | 1,97,680 |
| 39 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | Sqm | 145 | 965.1 | 1,39,939.5 |
| 40 | Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | grill Kg and | 145 | 560.85 | 81,323.25 |
| Schedule total | ₹1,60,65,256 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022withCSupto11.pdf
ATTACHMENT
Specialinstructionstothetenderer.pdf
ATTACHMENT
StandardTenderDocument2022R5withcondition_1.pdf Standard Tender Document 2022
ATTACHMENT
StandardTenderDocument2022R5withcondition_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .