Extension of 11 KV U.G Cable/11 KV. Over head /L.T. Line and installation of 11/0.43KV., 100/63/25 KVA Distribution Sub-Station for providing service connection at different locations of DWS Scheme under ED - Kumarghat

Amount

Supply:-

P.C.C pole 9.00 meter long

Steel pole - 9.00 meter long

3-phase 3-core, 6.35/11 KV 95 sqmm XLPE insulated Aluminium Power Cable

ACSR 6/1/2.59 mm

Polymeric 11 KV.Disc Insulator

11 KV.Disc Fittings

Polymeric Composite Pin insulator with G I Pin for 11 KV system, 320 mm.CD

11 KV, triple pole, 3 phase, 12 KV, 200 Amps G.O.S

11 KV DOF, 3 Ph , 200 Amp .

L.A For 11 KV System

M.S. channel 100x50x50x6 mm

M.S Channel 75X40x40X6 mm

M.S Angle 65X65X6mm

Supply of G.I Wire - 8 SWG

Stay set complete

H.T stay insulator

Stay Wire ,7/2.59 mm.

Bi-Metallic lugs of 120 Sqmm

Bi-Metallic lugs of 95 Sqmm

PVC cable 35 sqmm

PVC cable 16 sqmm

Re-wireable Porcelain Cut-out 200 A

Carrying of the following:- Carriage of 11/0.430, 3-Phase 63 KVA Distribution Transformer by machanical transport from MMD , A.D.Nagar Store Yard / Work Shop, Agartala to different work sites including loading, unloading and placing on base etc as required .

Erection Part :- P.C.C pole 9.00mtr long

S.T.pole - 9 meter long

Laying of one number PVC insulated and PVC sheathed / XLPE Power Cable of 11 KV Grade of following size direct in ground including excavation, sand cushioning, protective covering and re-filling the trenche etc. As required. Trench size: Width - 350 mm, Height - 1200 mm / Sand (Cushioning: Height - 250 mm, Width - 350 mm / Protection: Double layer Bricks Up to 120 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE Power Cable of 11 KV Grade of all size in the GI pipe / HDPE for Riser including tie up of pipe with pole by the help of MS Flat Clamp (Excluding cost of clamp and nut & bolts) as required Up to 400 sq.mm

Coiling of excess single / three core / 31/2 core up to 400 sq.mm, HV / MV, XLPE insulated, armoured Power Cable direct in to earth including excavation of earth up to a depth of 1500 mm (Size pit should be 2250 mm X 2250 mm of as as per site requirement) including first class bric protection of two layer flat Bric soiling, 300 mm Fine Sand (Local quary) for cushioning / bed and re-filling and ramming the excavated soil as per direction of Engineer-in-charge.

Providing of pre-cast cement concrete cable identification Route Marker (1 Cement : 2 Coarse Sand : 4 Graded Stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 (1 Cement : 3 Fine Sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker shall be embossed "DANGERS": TSECL. ELECTRIC POWER CABLE" with black colour latter (both side). The visible part shall be painted with yellow colour Japan Paint (1 Cement : 2 Coarse Sand : 4 Graded Stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 (1 Cement : 3 Fine Sand) etc. complete, excluding the plastering of jambs, sills and soffits.

Making of Outdoor Heat shrink type End termination kit suitable for XLPE insulated cable of grade 6.35/11 KV (E), 3-core, upto 150 mm² size.

ACSR 6/1/2.59 mm

Polymeric Disc insulator for 11 KV system

Polymeric Pin insulator for 11 KV system

11 KV , 3 Phase G.O.S

11 KV , 3 Phase D.O.F

2.80mtr long M.S Bracket made of 100x50x50x6 mm M.S. channel

0.60 mtr long M.S Bracket made of 100x50x50x6 mm M.S. channel

2.80mtr long M.S Bracket made of 75x40x40x6 mm M.S. channel

2.50mtr long M.S Bracket made of 65X65X6mm mm M.S. Angle

L.T. 2 wire Bracket (For Riser Pipe)(4x0.55m)

0.3 mtr.long SP Top Bracket made of 75X40X40X60mm M.S.Channel

1.3 mtr.long SP Bottom Bracket made of 75X40X40X60mm. M.S.Channel

1.7 mtr.long SP Guard Bracket made of 65x65x6 mm. M.S.angle

1.3 mtr.long DP Bottom Bracket made of 75X40X40X60mm. M.S.Channel

1.7 mtr.long DP Bottom Bracket made of 75X40X40X60mm.M.S.Channel

2.1 mtr.long DP Guard Bracket made of 65x65x6 mm.M.S.angle

2.8 mtr.long DP Bracket made of 75X40X40X60mm( for line GOS

2.8 mtr.long 65x65x6 mm.M.S.angle (GO Handle)

1.7 mtr.long tappimg Bracket made of 75X40X40X60mm.

Fabrication of cross arm made by the M.S Angle/ Channel

Stay set complete with supply of M.S Clamp, Nuts & Bolts.

Boundary fancing of Distribution Transformer as per specification

25 KVA Distribution Transformer

63 KVA Distribution Transformer

100 Kva Distribution Transformer

Cut- Out set with cable connection with supply of wooden plank

Three phase all kind PVC service with new connection in complete shape

Supply of 2.5 mtr. Long , 40 mm dia G.I. Pipe ( Make :- TATA / JINDAL )

Supply of 60 Kg Salt & 55 Kg Charcoal ( For 1 Pit )

Earthing with G.l pipe 2.5mtr. Long and 40mm dia, including excavation , refilling with alternate layer of salt and charcoal as per drawing ( excluding supply of G.l.Pipe, Salt & Charcoal, Giwire, nuts &bolts, etc. as reqd )

Laying of 8 SWG wire at 300 mm below the ground level for earthing of sub-station equipments from earth electrode

Supply of PN8, PE-100 GRADE, 110 mm OD, minimum wall thickness 7.3 HDPE Pipe

Supply and erection of Bracket clamp of 50X6mm Flat as required ( Which will be used in various bracket & clamping of cables )

Supply of Vehicle for site supervision

Jungle Cutting

Supply and erection of PVC Pipe for covering earthing

Supply and erection of Machine made M.S Nuts & bolts i/c washer ( 5'' x 5/1/2" & 16" long )

THE TRIPURA ELECTRICAL HOUSE