GE/863/EWS-T-27 OF 2020-21

Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m deep and getting out in hard / dense soil complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15 Cm deep and getting out in soft/soose soil complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15 Cm deep and getting out in hard / dense soil complete all as specified and directed.

Earth filling under floors including spreading and levelling in layers n. exc. 25cm thick and well ramming including watering complete all as specified and directed.

Excavating in Hard / dense soil in post holes (or similar holes ) each not exceeding 0.5 cu. m. getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance n. exc 50 mand making good surface complete all as specified and directed.

Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 250mm thick each layer, in soft/loose soil complete all as specified and directed.

M&L for Removing excavated material to distance n.exc 50m and depositing where directed at a level n.exc 1.5m from the starting point complete all as specified and directed.

Material & Labour broken stone or boulder Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface as in plinth protaction complete all as specified and directed.

M&L for Providing, cement concrete 1:3:6 type C-1 (using mechanically crushed 20 mm graded stone aggregate) for post holes complete all as specified and directed.

M&L for Providing, cement concrete 1:3:6 type C-0 (using mechanically crushed 12.50 mm graded stone aggregate) for pressed steel chowkhats complete all as specified and directed.

Material & Labour Cement concrete in foundations,Type D-2, 1:4:8 (using mechanically crushed 40 mm graded stone aggregate) ,filling and mass concrete complete all as specified and directed.

Material & Labour Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

Material and labour Pre-cast cement concrete block masonry with solid blocks,type C-1, 1:3:6 (using mechanically crushed 20 mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L damp proof course 40mm thick in cement concrete 1:2:4, type B-0, to horizontal or vertical surface including necessary formwork and mixing of WPC @ 3% by weight of cement or as per manufacturers instructions complete all as specified and directed. Note:-Water proofing compound shall be measured and paid separately as 'supply only' in respective item.

Supply only integral water proof compound complete all as specified and directed.

Material and labour for 100 mm thick cement concrete type D-2 1:4:8 (using mechanically crushed 20 mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type D-2 1:4:8 (using mechanically crushed 20 mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour 50 mm thick PCC 1:2:4, type B-1 (using mechanically crushed 20 mm graded stone aggregate) as in floors finished without using extra cement complete all as specified and directed.

Material & Labour 50 mm thick PCC 1:3:6 type C1(using mechanically crushed 20 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed.

Supply and fixing TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel (annealed) wire not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

Supply and fixing TMT bar 6 mm to 8 mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel (annealed) wire not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

Supply and fixing TMT bar 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel (annealed) wire not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) in Columns, pillars,piers,posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) in Beams, cantilevers, bressummers complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) in Slabs supported on walls, beams and col-umns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Cement concrete 1:2:4 Type B1 in lintel bands, lintels upto 1.5 mm clear span, seismic and other similar bands including necessary form work complete all as specified and directed.

M&L Form work to sides of concrete foundations,footing,raft and raft beams,sides and soffit (if any) of foundation and plinth beams: and similar works vertical or to batter for rough finished surfaces of concrete . complete all as specified & directed

Use and waste of form work to soffit slabs, shelves etc. not exceeding 200 mm thick (horizontal or sloping) for rough finished surface complete all as specified and directed.

M&L Formwork to sides and softs of flat floor and roof beams, beam haunchings, girders, bressumers, lintels, cantilivers, shelves incl sup ports, overhangs, etc. also splays between floors and beams etc with rough finish surfaces of conctete complete all as specified and directed.

M&L Form work to chullah hood, chajjas and similar items incl edges (with rough finish surface of concrete) complete all as specified and directed.

M&L Form work to pillars, posts, struts, piers, columns and stanchions with rough finished, square, rectangular or polygonal concrete surfaces complete all as specified and directed.

M & L 15mm thick rendering in CM 1:4 on fair face of brick work or concrete surface finished fair and even without using extra cement complete all as specified and directed.

M & L 15mm thick rendering in CM 1:4 with water proofing compund on fair face of brick work or concrete surface finished fair and even without using extra cement complete all as specified and directed. Note:-Water proofing compound shall be measured and paid separately as 'supply only' in respective item.

M&L 05 mm thick rendering on ceiling / soffits of slabs finished even and smooth without using extra cement complete all as specified and directed.

M&L 12mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.06 sqm but n.exc. 0.11 sqm as in flooring set and jointed with neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.18 sqm as in flooring set and jointed with neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.18 sqm as in skirting set and jointed with neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x200mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Supply & Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and as directed.

Supply & Fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Supply & Fix Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Supply & Fix Aluminium tower bolt 200mm long complete fixed with steel screws complete all as specified and directed.

Supply & Fix Aluminium tower bolt 150mm long complete fixed with steel screws complete all as specified and directed.

Supply & Fix MS Butt hinges medium wt of size 100 mm colled Rolled complete all as specified and directed.

Supply & Fix aluminium bow handle 125mm long complete fixed with steel screws complete all as specified and directed.

S & F 250mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, etc complete all as specified and directed.

Supply & Fix GI wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/ type/thickness complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges invl all necessary form work complete all as specified and directed.

M&L reflective chequered cement concrete tiles 30cm x 30cm x 25mm thick, With grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, over new or existing sub-base in floors complete all as specified and directed.

M&L preparing newly plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of wall and applying Two coats of Cement base paint complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L preparing newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Supply & Fix PVC (SWR) 75mm bore floor trap with grating incl jointing to waste pipe and fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply & Fix PVC valveless, syphonic action type, flushing cistern, low level,10 ltr capacity, white, with inlet, ball valve, float and handle including brackets incl 32mmdia PVC waste flush pipe complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern) white with trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc, including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F vitreous china squatting pan `Orissa’ pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including provision of lime concrete bedding complete all specified and directed.

Supply & fixing vitreous china wash basin, white, flat back of size 550mm x 400mm including 32mm dia PVC flush pipe with coupling and set of brackets including 15mm bore pillar tap fancy type cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule incl PVC connections 15mm size with PTMT nuts of legth 450mm complete all as specified and directed.

Supply & Fix PVC connection 450mm long 15mm dia complete all as specified and directed.

Supply & Fix GI tubing medium grade 15mm dia bore with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor complete all as specified and directed.

Supply & Fix GI tubing medium grade 20 mm dia bore with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor complete all as specified and directed.

S & F gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed to 15 mm bore GI Pipe complete all as specified and directed.

S & F gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed to 20 mm bore GI Pipe complete all as specified and directed.

Supply & fixing 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position complete all as specified and directed.

Supply & fixing ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed.

S & F bib taps cast copper alloy C P with crutch or butterfly handle screwed down, screwes for iron pipe for brass ferrule and fixed to 15mm bore complete all as specified and directed.

S & F Angle Stop valve cast copper alloy screwed down high pressured with crutch or butter fly handle screwed both ended for iron pipe and fixed 15mm bore complete all as specified and directed.

S & F stop valves, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F stop valves 15mm (Concealed type), cast copper alloy, fancy type chromium plated, screwed down, high pressure with long shank and cup etc complete all as specified and directed.

S&F chlorium plated soap dish of any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F chlorium plated shower roses with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed.

S & F CP towel rail 60 cm long D type fixed with rawl plug and steel screws complete all as specified and directed.

S&F in 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, roller etc, complete all as specified and directed.

S & F PVC (SWR) pipes sinlge socketed in any length with rubber ring joints fixed in walls 75 mm bore complete all as specified and directed.

S & F PVC (SWR) pipes sinlge socketed in any length with rubber ring joints fixed in walls / floors 110 mm bore complete all as specified and directed.

S&F 75 mm bore PVC (SWR) vent cowls complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed.

Material & labour 150 mm dia internal diameter salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L pre cast reinforced cement concrete M-25 using 20mm graded stone aggregate as in manhole cover and set in cement mortar (1:4) including necessary form work complete all as specified and directed.

S&F Mild steel dia of 20mm neck rag or lewis bolts, scrwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 15 cm and n. exc. 30cm complete all as specified and directed.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

S&F rolled Mild steel dia of 12mm neck rag or lewis bolts, scrwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 15 cm and n. exc. 30cm complete all as specified and directed.

S & F rolled mild steel Rolled sections as in main and cross beams ; hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting platesFe - 410-W (Gde-E-250) complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S & F Mild steel screw bolts (machine made) lngth of bolt exc 5cm but n exc 10cm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

S&F rolled Mild steel plates plain square cot or notched (ordinary and counter sunk) forming holes, without any attachment.(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

S & F rolled mild steel in Framed work such as grills, gratings, etc . with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe .290.Gde-E-165 complete all as specified and directed.

Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

M&L two coats of synthetic enamel painting on steel surfaces exc. 10 cm width or girth over a coat of red oxide primer inclding prepration of newly untreates surfaces complete all as specified and directed.

M&L for Painting on wooden surfaces of any description with two coats of synthetic enamel paint over one coat of pink primer on new or previously untreated surfaces including preparation of surface complete all as specified and directed.

M&L for Painting two coats on steel and iron surfaces of any description with synthetic enamel paint over one coat of red oxide on new or previously untreated surfaces n.exc. 10 cm width or grith including preparation of surface complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F anodised aluminium snap grade of size 600 X 600mm frame work for false ceiling complete all as specified and directed.

S&F hangers 6mm dia G I (upto 1200mm length) asjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

S&F Exposed metal frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid complete all as specified and directed. NOTE (frame work for ceiling shall be measured and paid seprately)

S&F pressed steel frames,size 125x60mm for doors with one or more rebates fabricated out of 1.25mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc duly treated with one shop coat of red oxide primer complete all as specified and directed.

M&L for preparation of new surface of steel and iron work, of any description not otherwise described, exc 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F 30 mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

M & L sheet glass, 3mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane complete all as specified and directed.

Construction of 20 users Septic tank to carry sewage and sludge water, complete all as specified and shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 of Chief Engineer Chandigarh Zone and directed. Note:- (a) Excavation and earth work shall be in any type of soil. (b) Precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) block masonry with solid blocks, set in CM 1:4 shall be used in walls in lieu of Brick masonary / stone masonary as shown in drawings. (c ) The width of Precast cement concrete (20mm graded stone aggregate ) type C-1 block masonry in walls shall be as 700 / 600 / 500 / 400 mm in lieu of width of Brick masonary 690 / 575 / 460 / 345 mm respectively as shown in drawings. (d) RCC work where ever shown in drawings as in base slab, baffle walls , Vent shaft, manhole openings with cover connection, roof slab etc . shall be M-25 Design mix, type B1 using 20 mm graded stone aggregate. (e) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.

Construction of Soakage well 1.80 m dia and 3.0 m effective depth complete all as specified and shown in Drg No. STD 1173 (C) Sheet 1R/2 of Chief Engineer Chandigarh Zone and as directed. NOTE:- (a) Excavation and earth work shall be in any type of soil. (b) Foundation in PCC 1:3:6 type C2 using 40 mm graded stone aggregate. (c) Honey combing brick walls masonry as shown in drawing. (d) Brick bats filling as shown in drawings (e) RCC work where ever shown in drawings shall be M-25 Design Mix, type B1 using 20 mm graded stone aggregate (f) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.

M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.50 Sqmm multistranded , 1100 Volt grade copper conductor cable unsheathed type, alongwith 1.50 sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl concealed rigid PVC conduit with accessories having ISI mark including provision of 1.30 mm thick sheet metal sunken box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan / bell point controlled by one switch complete all as specified and directed.

All as per Srl item no. 117 here-in-before but controlled with one 3 pin socket outlet 5 Amp on independent board with cables 1.5 sqmm complete all as specified and directed.

All as per Srl item no. 117 here-in-before but controlled with one 3 pin socket outlet 5 Amp on same board with cables 1.5 sqmm complete all as specified and directed.

All as per Srl item no. 117 here-in-before but controlled with one 3 pin socket outlet 15 Amp on independent board with cables 2.5 sqmm complete all as specified and directed.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing of socket outlet 5 pin 6 Amp, 230 Volt flush type complete all as specified and directed.

Supply and fixing of socket outlet 2 in 1, 6 pin 5 & 15 Amp, 230 Volt flush type complete all as specified and directed.

M&L Ceiling rose, 3 terminal with ISI mark complete all as specified and directed.

S&F of wall mounted LED batten extruded polycarbonate body and integrated electronic driver, 20 watt LED fittings, 6000K, 230 volts, duffused optics, etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from celing rose to fittings complete all as specified and directed.

Supply & Fixing wall mounted LED Bulk head fittings, 10 watt, warm white, 230 Volts, diffused optics, etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed.

Supply & Fixing LED lamp 12 watt system lumen with holder all accessories complete all as specified and directed.

Supply & Fixing LED lamp 10 watt system lumen with holder all accessories complete all as specified and directed.

Supply and fixing of MCB distribution board with bus bar, neutral link, earth bar made out of CRCA mild steel surface mounting SPN 4 way 230 volts double door type regal gray horizontal type complete all as specified and directed. Note:- MCB shall be measured and paid saperately.

S&F MCB SPN 16 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed.

S&F MCB SPN 32 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed.

S&F MCB SP 6 Amp to 32 Amp with rupturing capacity 10 KA complete all as specified and directed.

S&F of exhaust fan heavy duty plastic body 150mmsweep with all accessories connecting up with twin core twisted flexible copper conductor cable from ceiling rose to exhaust fan including necessary fixing arrangement for proper fixing in wall complete all as specified and directed.

S&F ceiling fan 1200 mm sweep, copper wound, single phase, 230 volts complete with all accessories like fan regulator down rod, canopies etc complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 4 Sqmm complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 6 Sqmm complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60x 6 mm thick, buried directly in ground (eath pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron wire 4.0 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 4 connected to earthing test point all as specified or indicated including including funnel with wire mesh, PCC chamber, PCC cover 80 mm thick , GI watering pipe 20 mm dia, medium grade 15 mm dia GI protection pipe,light grade and adequate quantity of salt and charcoal testing on completion, complete with excavation and earth work and testing on completion. Note: GI earth wire upto 7.5 Mtr is deemed to be included in the quoted rate and beyond 7.5 mtr will be measured and paid seperately under relevant items.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 0.00

M/S SHIV NATH ENTERPRISES

Pankaj Builders