Improvement and Damrikaran of Surpur Lasera Dandanagraja Ghindwada Motor Road in km 6.00 to 9.00 under State Sector in Pauri Constituency of Kot Block of Pauri Garhwal

Amount

Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix (1:3:6) Plain cement concrete M 10 grade including supply of all material, labour, T&P etc. required for proper completion of the work

Random rubble masonry 1:5 including supply of all material, labour, T&P etc. required for proper completion of the work

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (For height upto 5 m) R.C.C. grade M 25 including supply of all material, labour, T&P etc. required for proper completion of the work

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 R.C.C. grade M 25 including supply of all material, labour, T&P etc. required for proper completion of the work

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in superstructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202. (The reinforcement steel shall be procured from original (primary) steel producers as per clause no. 2011.3.1 of MORD specifications (First Revision'2014) and IS1786:2008 clause no. 1.6) including supply of all material, labour, T&P etc. required for proper completion of the work

H.P stone filling in back of wallls including cost of all materials ,royality,T & P etc. complete i/c supply of all material labour T&P etc required for proper completion of work.

Random rubble stone masonry laid dry including supply of all material labour T&P etc complete i/c supply of all material labour T&P etc required for proper completion of work

Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped Gabions (Zinc plus PVC coated), of size 3mX1mX1m with two diaphragms at 1m interval, having mesh opening 100mmx120 mm, mesh wire diameter 2.7mm/3.7mm, edge/selvedge wire diameter 3.4/4.4 mm and lacing wire diameter 2.2/3.2 mm. (The work includes filling boulders in the gabions). including supply of all material, labour, T&P etc. required for proper completion of the work

Making superelevation with lovering in half width & filling in remaining haif half width with coolie walling including supply of all materials , labour T&P etc required for proper completion of work

Lowering

coolie walling

Patri filling with local soil after coolie walling , after laying G1,G2,G3 i/c supply of all material labour T&P etc required for proper completion of work.

WBM Grading 1 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacted to the required density Grading 1(Size range 90mm to 45 mm and compacted thickness of 100 mm) as per Technical Specification Clause 405 including supply of all material, labour, T&P etc. required for proper completion of the work

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacted to the required density Grading 2(Size range 63mm to 45 mm and compacted thickness of 75 mm) as per Technical Specification Clause 405 including supply of all material, labour, T&P etc. required for proper completion of the work

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacted to the required density Grading 3(Size range 53mm to 22.4 mm and compacted thickness of 75 mm) as per Technical Specification Clause 405. including supply of all material, labour, T&P etc. required for proper completion of the work

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.00 kg/sqm using mechanical means as per echnical Specification Clause 502.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

20 mm thick Open Graded Premix Carpet using Bitumen Emulsion as per Technical Specification Clause 508.2

Seal coat with Emulsion- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510

Construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. i/c supply of all material labour T&P etc required for proper completion of work.

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 i/c supply of all material labour T&P etc required for proper completion of work.

Road Delineators / Vertical Guide Posts: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandal-proof. Including all test report and warranties as per IRC 67 and IRC 79 i/c supply of all material labour T&P etc required for proper completion of work.

Providing edge stones of Size 450x350x100 mm on valley side of formation as per drawing and technical specification clause 1608.2.6

Ordinary Kilometer Stone (Precast)

200 m stone (precast)

Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. As per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction i/c supply of all material labour T&P etc required for proper completion of work.

White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 i/c supply of all material labour T&P etc required for proper completion of work.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 i/c supply of all material labour T&P etc required for proper completion of work.

M/S HimalayanConstruction (BID ID -374767)

S.S. ENTERPRISES (BID ID -374697)

Ramesh Singh Rawat (BID ID -374747)

Rajendra singh kuldeep singh (BID ID -374761)

VINOD KUMAR JUYAL (BID ID -374684)