Himachal

Active

Works

Pumps/Motors

Restoration of rain damages of LWSS Bir Suja Chougan in Tehsil Baijnath Distt Kangra HP

HP Irrigation and Public Health

Bir Suja Chougan | Kangra, Himachal Pradesh

Amount: ₹4.5 LCloses: 2 Oct 20265d left

Timeline

Published25 Sept 2026
Closes2 Oct 2026
Bid Opening3 Oct 2026

Tender Value

₹4.5 L

EMD Value

₹8,905

Closing Date

2 Oct 2026, 5:00 pm5d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Jal Shakti Division Baijnath Distt Kangra HP

Work Description

SH Replacement of 20.00 HP Submersible motor providing and fixing of wire 4 sq mm and Starter Set No.

Tender Information

Tender ID

2026_HPIPH_144335_1

Reference Number

6097-6150 dated 25.09.2026

Tender Type

Open Tender

Product Category

Pumps/Motors

Form of Contract

Item Rate

Location

Bir Suja Chougan

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical

RequiredAll payment i.e. Cost of Bid document and earnest Money as required of NIT (.pdf)

RequiredCertificate of contractor registration in appropriate class with Jal Shakti Vibhag as required NIT (.pdf)

RequiredScanned copy of PAN GST EPF Registration and Income Tax return as required of NIT (.pdf)

RequiredScanned copy of authorization letter regarding DSC of the person as required of NIT (.pdf)

RequiredScanned copy of undertaking as required of NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

Tender Fee Payable To

Executive Engineer

EMD Fee Amount

₹8,905

Important Dates

Last Activity

25 Sept 2026

Published

25 Sept 2026

Bid Opening

3 Oct 2026

Download Starts

25 Sept 2026

Download Ends

2 Oct 2026

Submission Starts

25 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (10 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing ,Supply, Installation,Testing ,Commissioning & Errection of 20.00 HP Submersible Pump of (KSB / Kalama / Kirloskar / Johnston / Cromption / BS) make conforming to BIS; 8034-1976 latest suitable for lifting clear,cold & fresh water (latest with uptodate ammendments) fitted with bronze impellers / suitable alloy directly coupled to squirrell case electric induction motor of same make as (manufacurer standard) conforming to BIS; 9283-1979 (latest with uptodate ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard,errection clamps,cable clips & depth gauge etc. The pump shall be suitable for operation on data given below:-	1	Set	-	-
1.01	SITE CONDITIONS :-	-	-	-	-
1.02	Total Head : - 360 Mtrs.	-	-	-	-
1.03	Discharge :- 7.7 LPS	-	-	-	-
1.04	Efficiency :- 76%	-	-	-	-
2	Providing & laying PVC insulated jointless, flat water proof 3 core copper cable 4.00 mm2 of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I)-1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .	140	Rmt	-	-
3	Providing and Installation of new starters for 20 HP automatic pannel including auto start, auto stop and restart facility single phase preventer, timer, relay, selector switch auto and manually start stop facility, prevention of phase reversal, imbalance and overload and fixed with compatible starter complete in all respect with in all lead and lift as per satisfaction of Engineer- in-charge.	1	Set	-	-
4	Providing and fixing of nut and bolt of 5/8 x 3 '' long complete in all respect with in all lead and lift as per satisfaction of Engineer- in-charge.	125	Kg	-	-
5	Labour Charges of Motor and pump lifting by using manpower 8 persons from site of wok to workshop and then back to site including refixing the same complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge	1	Job	-	-
6	Errection/Testing of pump , motor & Starter etc. welding charge etc including carriage to the site of work including modification inexisting piping system with all accessories i.e. flanges, nuts and bolts, gasket reducer,increasers bends etc. Required at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .	1	Job	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.86 MB

Work Item Documents

Form_6.pdf

Tender Documents • 0.26 MB

Form_8.pdf

Tender Documents • 0.80 MB

TC.pdf

Tender Documents • 0.06 MB

BOQ_214641.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing ,Supply, Installation,Testing ,Commissioning & Errection of 20.00 HP Submersible Pump of (KSB / Kalama / Kirloskar / Johnston / Cromption / BS) make conforming to BIS; 8034-1976 latest suitable for lifting clear,cold & fresh water (latest with uptodate ammendments) fitted with bronze impellers / suitable alloy directly coupled to squirrell case electric induction motor of same make as (manufacurer standard) conforming to BIS; 9283-1979 (latest with uptodate ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard,errection clamps,cable clips & depth gauge etc. The pump shall be suitable for operation on data given below:-

Set

1.01

SITE CONDITIONS :-

1.02

Total Head : - 360 Mtrs.

1.03

Discharge :- 7.7 LPS

1.04

Efficiency :- 76%

Providing & laying PVC insulated jointless, flat water proof 3 core copper cable 4.00 mm2 of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I)-1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

140

Rmt

Providing and Installation of new starters for 20 HP automatic pannel including auto start, auto stop and restart facility single phase preventer, timer, relay, selector switch auto and manually start stop facility, prevention of phase reversal, imbalance and overload and fixed with compatible starter complete in all respect with in all lead and lift as per satisfaction of Engineer- in-charge.

Set

Providing and fixing of nut and bolt of 5/8 x 3 '' long complete in all respect with in all lead and lift as per satisfaction of Engineer- in-charge.

125

Labour Charges of Motor and pump lifting by using manpower 8 persons from site of wok to workshop and then back to site including refixing the same complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Job

Errection/Testing of pump , motor & Starter etc. welding charge etc including carriage to the site of work including modification inexisting piping system with all accessories i.e. flanges, nuts and bolts, gasket reducer,increasers bends etc. Required at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Job