REPAIR MAINT OF DISTRIBUTION GI CI PPR PIPE LINES OF DIFFERENT SIZES AND ALLIED WORK AND IMPROVEMENT TO WATER SUPPLY INSTALLATION UNDER GE EAST BAREILLY

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for laying of pipe/foundation etc or for shaft well cess pits manholes pier holes etc and not exceeding 1.5 m in depth and n.exc 10 sq m on plan and getting out in soft/loose soil complete all as specified & directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified & directed

Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed

M&L for boring the holes under roads pavements, hardstanding by treanch less techonology, using ultrasound technique and necessary machine including CI Pipe of 100 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

M&L for cutting of roads for laying of pipe under roads, pavements, hardstanding by excavation and making good after laying and testing complete all as specified and directed.

Taking up and down steel tubing and connections, including cleaning for re fixing or removal to store of following bore of pipes complete all as specified and directed. 25 mm dia

Ditto all as per item no 6 above but for 20 mm dia

Ditto all as per item no 6 above but for 15 mm dia

Supply and laying 25 mm bore steel water tubing medium grade fixed with wall/laid in floor with and including all GI fittings as required at site complete all as specified and directed. Make:-TATA/JINDAL/ ZENITH or equivalent as approved by GE.

Ditto all as per item no 9 above but for 20 mm bore

Ditto all as per item no 9 above but for 15 mm bore

Taking up or down of old PVC/HDPE tubing and cleaning and re connection of following sizes complete all as specified and directed. 100 mm bore

Ditto all as per item no 12 above but for 80 mm bore

Ditto all as per item no 12 above but for 50 mm bore

Ditto all as per item no 12 above but for 40 mm bore

S&F 3 layer PP-R pipe of 90 mm bore SDR 7.4 & PN 1.6 and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fitting laid in trenches. Make : SFMC/Fusion/Prince or equivalent as approved by GE.

Ditto all as per item no 16 above but for 110 mm bore

Ditto all as per item no 16 above but for 50 mm bore

Ditto all as per item no 16 above but for 40 mm bore

S&F gate valve of size 50 mm. as specified and directed. Make : NMV, ZOLOTO, LEADER or equivalent as approved by GE.

Ditto all as per item no 20 above but of size 40 mm.

Ditto all as per item no 20 above but of size 25 mm.

Ditto all as per item no 20 above but of size 20 mm.

Ditto all as per item no 20 above but of size 15 mm.

S&F PP-R gate valve of size 40 mm (Brass insert) as per site requirement and as specified and directed.

Ditto all as per item no 25 above Gate valve of size 50 mm.

Ditto all as per item no 25 above Gate valve of size 20 mm.

S&F of 'D' Joint in the PP-R pipe of 80 mm dia complete all as specified and directed.

Ditto all as per item no 28 above 100 mm dia

Ditto all as per item no 28 above 150 mm dia

Ditto all as per item no 28 above 200 mm dia

M&L for repair/rectification of leakage/blockage to water supply distribution lines of following dia of GI tubing by necessary excavation, returning /filling as required , tightening of lose joints of union ,elbow, socket nipple as per site requirement including for replacement of GI union ,socket, nipple as required complete all as directed. 15mm dia to 20mm dia

Ditto all as per item no 32 above but for 25 mm dia to 40 mm dia

Ditto all as per item no 32 above but for 50 mm dia

M&L dewatering complete trenches manually for repairing joints by cocking and inserting spurn yarn and Run lead joint, making good/ leakless the existing joint including necessary excavation and earth work like returning, filling etc for pipes of following dia complete all as directed. 80 mm dia

Ditto all as per item no 35 above but for 100 mm dia

Ditto all as per item no 35 above but for 150 mm dia

Ditto all as per item no 35 above but for 200 mm dia

M & L for CI Bends, connecting pieces, bell mouth pieces, tapers, tee pieces of one end flanged and other end spigot or socket upto 150 mm dia complete all as specified and directed.

S&F 150 mm dia Cast iron Non Return Valve at various pump houses complete as specified and directed. Make: KIRLOSKAR, RAMCO or equivalent as approved by GE.

Ditto all as per item no 40 above but Cast Iron NRV of 200 mm dia

S&F in repairs 3 pole power contractors type ML 4 415 volts 50HZ size Fr3 AC3 rating 70A , AC1 rating 100A aux contacts 2 NO +2 NC conforms to IS 60947-4-1 IEC 60947-4-1 all as specified and as directed. Make : L&T or equivalent as approved by GE.

S&F in repairs electronic timer type ST 100 suitable for operation on 415 volts 50 Hz for 3-30 Sec all as specified and as directed. Make : L&T or equivalent as approved by GE.

S&F in repairs electronic timer type ET 100 suitable for operation on 415 volts 50 Hz for 3-10/30 Sec complete all as specified and as directed. Make : L&T or equivalent as approved by GE..

S&F in repair MCCB 125 Amps 3 pole 415 volt breaking capacity 25 KA confirms to IS/ IEC 60947 -2 complete all as specified and as directed. Make :Havells/C&S/ L&T or equivalent as approved by GE.

S&F in repair MCCB 200 Amps 4 pole 415V 50Hz breaking capacity 25 KA confirms to IS/IEC60947-2 complete all as specified and as directed. Make :Havells/C&S/ L&T or equivalent as approved by GE.

Supply only grass and weeds killer chemical of make Roundup complete all as specified and directed.

S&F rubber mat of size 1mtrx2mtrx12 mm thick at installation of make jyoti or equivalent as approved by GE and as directed by Engr-In-Charge

S&F machine maintenance chart coloure of size approx ( 900 mm x 600 mm x 6 mm thick) plywood with teak wood frame including covered with plastic laminated sheet complete all as specified and ditected.

S&F Electric shock treatment chart coloure of size approx ( 900 mm x 600 mm x 6 mm thick) plywood with teak wood frame including covered with plastic laminated sheet complete all as specified and ditected.

S&F pressure gauge of dial 30 to 60 suitable for fixing at 100/150 mm header pipe with all fiting and fixtures of make guru or equivalent as approve by GE complete all as specified and directed.

S&F mini motor protection relay for 35-51 hp submersibble motores of make L&T complete all as specified amd directed.

S&F air termination single pointed aluminium rod 12 mm dia and 300 mm long fixed in position complete all as specified & directed. ( Note:- all accessories for fixing of termination is included in the quoted rates)

S&F alluminium strips 25x3.15 mm with saddles and fixing screws etc for roof conductor and down conductor above ground complete all as specified and directed.

S&F galvanised iron strip 32x6mm buried into ground complete all as specified and directed.

S&F test point terminal block made of gun metal or phosphorus bronze of size 75x75x25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hex and head screw complete all as specified and directed..

M7l for earthing complete with galvenised steel earth plate electrode 600x60x6 mm tyhick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level )with top edge of plate not less than 1.5 mtr below normal ground level ,connected to galvenised earth strip 32x6mm by means of bolt,nuts,checknuts nad asher of galvenized iron or steel all as shown in electrical plate no. 3 connected to the earthing test point all as specified inclding 20 mm dia bore GI pipe light grade ,water pipe from earth chamber to the upper edge of earth plate GI funnel with wire mess provision of PCC 1:2:4 tyoe B1(using 20 mm grade stone aggregated ) duly reinforced with mild steel roungd bars @150 mm C/C both ways with 10 mm dial including fittings handle with all including necessary excavation and earth work and laying of GI pipe 40 mm dia connected in floors /walss complete including testing on completion. (NOTE-Testing of earthing will be conducted by contractor for proper satisfaction of Engineer-in-Charge complete all as specified and directed.

m &L for PCC (1:3:6) type C1 (using 20 mm grded crushed stone aggregate) as in foundation filling/mass concrete complete all as specified and directed..

M&L GI tube light grade galvenized with all fitting fixed complete in walls and ceilling of 50 mm dia complete all as specified and directed.

S&F PVC DMC blocks with nuts bolts in PCC block complete all as specified and directed..

M&L clamps and back plates fabricated from structural steel section including nut,bolt,washer welding bending cold orhot drilling holes for bolts in any shape or size as indicated with two caots of paints complete all as specified and directed..

S&F in repair cast iron foot valve 100 mm dia complete all as specified and directed.

M&L for provision of new wash out points by proper cutting and screwing of existing DI/CI/GI pipe fixing reducer tee of suitable size, supplying and fixing, Jointing, testing CI sluice valve of following size by fixing 02 Nos at each wash out point with flanged ends including necessary mountings nuts, bolts washers and packing fibers gasket on both end and making pit chamber including iron frame cover 3.15 mm thick with locking arrangements complete all as specified and directed. Wash out point at 150 mm bore pipe

Ditto all as per item no 65 above but Wash out point at 100 mm bore pipe

M&L for trimming vegetation or small inequalities clearing all grass vegetation, saplings, shrubs, brushwood, roots, and tree of surroundings area including and removing rubbish upto a distance of 50 meters outside the periphery of the area under clearance of water supply installations and STPs complete all as specified and as directed.(NOTE:-trimming will be done two times during contrct at all installations of water supply complete all as specified and directed)

Supply and fix in repair spare contact kit for ML 3 contactor complete all as specified and directed . Make :- L&T/Havells/C&S or equivalent as approved by GE.

Supply and fix in repair spare contact kit for ML 4 contactor complete all as specified and directed .Make :- L&T/Havells/C&S or equivalent as approved by GE.

S&F in replacement of PVC bib tap 15 mm complete all as specified and directed..

M&L for dismantling of motor, 3 phase, 7.5 KW, taking out burnt winding wire from stator, cleaning all slots properly, repair of pump/rewinding the motor with proper guage of super enamelled winding wire and varnishing properly including baking and providing insulation and packing properly re-assembling the motor with pump and installed at its proper position and testing the same including connection plate complete all as specified and directed..

Lifting/taking out defective submersible pump 40/41 HP alonwith column pipe of any size and submersible cable , dismantling the pump from motor, setting aside for repair /servicing / overhauling including lowering the pump set into borewell replacemt of packing and nut bolts ( if required) and testing after the completion of repair works in the presence of GE/ Engr in charge complete all as specified and directed..

Rewinding to submersible pump 40/41 HP of any make with super enameled copper winding wire PVC coated 2 mm thick as per taken out qty , Providing PVC separators , PVC sleeves & jointing compound as specified and directed. ( NOTE :- Rewinding, replacement items will be measured and paid seprately under relevent item.If the same motor copper winding wiring burnt second time in the above contract period, the contractor is held responsible for rewind the same without any extra cost to the GOVT complete all as specified and directed.

Repair/Replacement of following parts of the submersible pump and motor for capacity 40/41 HP of original company as approved by Accepting officer complete all as specified and directed.. Make : KSB, Crompton, Kirlosker Thrust bearing plate made out of carbon for submersible motor

Gun metal bush for submersible motor

Shaft sleeve made out of stainless steel for submersible motor

Clamp stud for submersible motor

Rotor balancing of submersible motor

Shaft grinding of submersible motor

GM Neck Ring for submersible pump

Stainless steel sleeve for submersible pump

Stainless steel pump shaft for submersible pump

Stainless steel impeller for submersible pump

Cast iron bowl for submersible pump

Rubber bush for submersible pump

S&F sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 150 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working complete all as specified and directed. (Make: BIR/ KIRLOSKAR/ Kartar or Equivalent as approved by GE)

S&F sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 100 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working complete all as specified and directed. (Make: BIR/ KIRLOSKAR or equivalent as approved by GE.)

Supply only Calcium huphochloride calcium based granular powder having 65 to 70%available chlorine (In 45 kg drum) complete all as specified and directed

M&L for dismantling of non clog type centrifugal pump set of capacity 12.5hp either fixedor floor or on trolley mounred and taling out unsv spares and performin following operation to complete the task-: Rewinding of the motor centrifugsal pumping set with insulated copper winding including sleeves as per originsl approved and replacement of worn out parts including griding of parts testing & transport charges complete all as specified and directed. replacement of motor bearing with lock nut -02 Nos Repalcement of fan motor-01 No Replacement of star coupling set with rubber-01 Each

Dewatering of inner sump by potable pumpiong set and taking out complete the sanitary materials and other wastage from sluice valve connect from outer sump well for equalisation of water in both well complete all as specified and directed

Take the water sample from the bore well at ph no. 26,22,23,21,20/35,41,37 and 38 and two consumer end and send it for physical/Chemical/Bateriological test from any recognised govt agency (two times in contract period) and provide its report to Engr in charge complete all as specified and directed.

B & R Work :- Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area not exc 1.50 sqm each complete all as specified and directed.

Taking down shutter of any description area not exc 1.00 Sqm each complete all as specified and directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified and directed.

Demolition/Dismantling of brick work or stone boulders masonry built in cement mortar or lime mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Hacking out old unservicable glass or any description from wooden frame or stone concrete or brick sorrounds of any description or size including hacking out old putty or removing bevds etc including making good breakage in taking out and handing to store complete all as specified and drected

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified

Dismantling water tank and removing to store exc 500 ltr but n exc 1000 ltrs

S&Fin repairs for 15mm bore tube `Medium grade` galvanised with all new fittings and fixed to wall, cuilling or laid in floors complete all as specified and directed.

S&Fin repairs for 20mm bore tube `Medium grade` galvanised with all new fittings and fixed to wall, cuilling or laid in floors complete all as specified and directed.

S&F 500 litres, rotational moulded multilayer polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. (Note : PVC tanks shall be ISI marked and having minium two layers)

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 550 mm X 450 mm X 820 mm complete including fancy type CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.Make cera /parryware or equivalent

M&L for second class hard wood (Sal/Bijasal/Holock)Plain, solid, straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.

M&L 35 mm thick IInd class hard wood Plain framed, panelled shutters ( any number of panels ), with panels of timber flat on both sides ( feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers or panels of 9 mm thick BWP commercial ply, supplied and fitted to chowkhats complete all as specified and directed.

S&F 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels , commercial type on both sides, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, bed block for hold fast coping benching etc including weathering slightly rounded or chamfered angle and throating etc complete all as specified and directed.

M&L for MS work as in clamps, hold fast, wall ties, hooks, angle cleat and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

S & F in repairs150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F in repairs150 mm long Aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F in repairs150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.

S&F in repairs150mm size mild steel, oval type, bow handles, stove enamelled black anodised complete all as specified and directed .

S&F in repairs 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

M&L for preparation of old plastered or un plastered surface of walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot , moulds moss and efflorescent salts and trading oil and greasy spots including all necessary scaffolding and applying one coat of cement base paint (white or tinted ) complete all as specified and directed.

M&L for preparation of old plastered or un plastered surface of walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot , moulds moss and efflorescent salts and trading oil and greasy spots including all necessary scaffolding and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old painted wood or wood based surface of any description , not otherwise described , over 10 cm width or girth including knotting and stopping and applying one coat of synthetic enamel paint (any tint /shade ) complete all as specified and directed.

M&L for preparation of old painted steel and iron surface of any description , not otherwise described , over 10 cm width or girth and applying one coat of synthetic enamel paint (any tint /shade ) complete all as specified and directed.

Removal of vegitation growth trees (any dia) complete with complete roots including application of anti- groth chemical from RCC roof slab rain water / sewage water pipe complete including of brick / concrete masonry if required , scaffolding at any height and making good with and including materials as demolished , including matching with existing surface complete all as specified and directed.

M&L for writing letters or figures block (Roman , Italic or India) n. exc 30cm hight complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan, exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 , including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4 with using WPC including finishing the surface even and smooth without using extra cement complete all as specified and directed. (NOTE:-WPC shall be measured and paid as "SUPPLY ONLY"

M & L for rendering 5mm thick rendering in cement morter 1:4 on brick work or concrete surface of ceilling & finished the surface even and smooth complete all as specified and directed

Supply only integral water proofing compound.

M & L for preparation of newly plastered surface of wall and applying two coats of cement base paint over and including one coat of cement wash primer complete all as specified and directed

M & L for preparation of newly plastered surface of wall and applying three coats of white wash on brick or concrete surface complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in hardstanding /Path & finished the surface even and smooth without using extra cement including making impression of expanded metal whilst the concrete is green complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L Non- skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surfaces of size 300 mm x 200 mm x7 mm thick, set and pointed in neat cement slurry and pointed in white or colour cement to match with & including rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces complete all as specified and as directed by the Engineer-in-Charge

M&L for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection & finished the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete with and including necessary form work etc complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S&F in repairs sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove.

M&L for rendering 20mm thick in CM 1:4 on roof surface with WPC & finished the surface even and smooth without using extra cement (NOTE.:-WPC will be measured & paid seperately as "SUPPLY ONLY")

M&L for preparation of roof surfaces , applying a coat of bituminous primer @ 0.30 Kg/Sqm ,applying a coat of bitumen grade 85/25 @ 1.2 Kg/Sqm over primer , laying of modified polyermric water proofing membrane of approved make (weight not less than 3.0 Kg/Sqm) and finally finished with coat of bitumen grade 85/25 @ 1.2kg/Sqm as per manufacturers instructions including two coat of aluminium paint complete all as specified and directed.

S&F in repairs water closet vitreous china squatting pan,Orissa pattern size 580x440mm white with integral foot rests ( excluding flushing cistern and flush pipe) and including with 'P' or 'S trap complete including' provison of lime concrete bedding fixed in repair

Supply and fixing in repairs Bib tap of 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule `Fixed in repairs` complete all as specified and as directed

S&F in repair PVC pipe connection 450mm long with PTMT nuts suitable for 15mm dia pipe etc complete all as specified and directed

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.Make Jaguar or equivalent

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.

sunder and company

N S ELECTRICALS

VIJAY ENTERPRISES