Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹46.3 L
EMD Value
₹47,000
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Valsad
CDP-5 Year 2026-27 Construction of Atalwadi at Village Valvada. Ta Umargam, Dist.- Valsad
367539
21 of 2026-27
Open
Civil Works - Buildings
Works
Valsad
5 documents required · 5 mandatory
₹1,500
Executive Engineer, Panchayat (R and B) Division, Valsad
₹47,000
20 Nov 2026
20 Nov 2026
20 Nov 2026
7 Dec 2026
20 Nov 2026
120 days
Name of Work : CDP-5 Year 2026-27 Construction of Atalwadi at Village Valvada.
Ta.Umargam, Dist.- Valsad
BILL OF QUANTITIES
Item No. Item of work Quantity Unit Rate In figures Amount
Excavation for foundation upto 1.5 M
depth including sorting out and
1 stacking of useful materials and 111.24 Cu.Mt. 254.370
disposing of the excavated stuff upto
50 M lead (C) Hard Murrum
Excavation for foundation for depth
from 1.5 m to 3.0 m including sorting
out and stacking of useful materials
and disposing off the excavated stuff
upto 50 Meter lead. (C) Hard Murrum
Filling available excavated earth
(excluding rock in trenches plinth,
slides of foundations etc. in layers not
3 exceeding 20 cm in depth 120.06 Cu.Mt. 130.390
consolidating each deposited layer by
ramming and watering)
Filling in foundation and plinth with
murrum or selected soil in layers of
20cm thickness including watering
ramming and consolidating etc.
Providing and laying cement concrete
work 1:2:4 (M-150) (1- Cement : 2-
Coarse sand : 4- graded stone
aggregates 20 mm nominal size) and
curing complete excluding cost of
formwork and reinforcement for
reinforced concrete work in (A)
Foundations, footings, Base or
columns and Mass concrete.
Providing and laying cement concrete
1:1.5:3 (M-200) and curing complete
including the cost of form work but
excluding cost of reinforcement for
6 reinforced concrete work in 18.33 Cum 4683.370
Foundations, footings bases of
columns and the like and Mass
concrete for Footing
Providing and laying cement concrete
1:1.5:3 (M-200) and curing complete
including the cost of form work but
excluding cost of reinforcement for
7 reinforced concrete work in 6.52 Cu.Mt. 8989.000
Foundations, footings bases of
columns and the like and Mass
concrete for below plinth columns.
Providing and laying cement concrete
1:1.5:3 (M-200) and curing complete
including the cost of form work but
8 excluding cost of reinforcement for 22.57 Cu.Mt. 6112.520
reinforced concrete work for Ground
Brick work using common burnt clay
building brick having crushing strength
not less than 35 kg/sq. cm. in
9 foundation and plinth in cement mortar 23.10 Cu.Mt. 4021.020
1:6 ( 1 Cement: 6 fine sand) (B)
Providing and laying Cement Concrete
1:1.5:3 (M 200) and curing complete
Including the cost of formwork But
10 Excluding the cost of reinforcement for 46.51 Cu.Mt. 4480.360
reinforced concrete work in R.C.C.
Providing and laying cement concrete
1:1.5:3 (M 200) and curing complete
including the cost of form work but
excluding cost of reinforcement for
reinforced concrete work for Column in
Providing laying cement concrete
1:1.5:3 (M 200) and curing complete
including the cost of formwork but cost
of form work but excluding the cost of
reinforcement of reinforced concrete
work in (C) Beams, Girders and
Cantileve for Ground Floor
Providing and laying cement concrete
1:1.5:3 (M 200) and curing complete
including the cost of form work and
13 excluding the cost of reinforcement for 0.18 Cu.Mt. 8183.020
reinforced concrete work in (c) Lintel in
Providing and laying cement concrete
1:1.5:3 (M 200) and curing complete
including the cost of form work and
14 excluding the cost of reinforcement for 0.12 Cu.Mt. 7731.550
reinforced concrete work in (c) Chajja
in Ground Floor
Providing and laying cement concrete
1:1.5:3 (M 200) and curing complete
including the cost of form work but
15 excluding cost of reinforcement for 8.12 Cu.Mt. 8576.920
reinforced concrete work for Slab in
Providng TMT bars renforcement of
FE 500 / 500D for R.C.C. work
16 including bending binding and placing 10244.09 Cu.Mt. 76.210
in position complete for all floor.
Brick work using common burnt clay
building brick having crushing strength
not less than 35 kg/sq. cm. in super
17 structure above plinth level up to floor 35.89 Cu.Mt. 4295.990
two level in cement mortar 1:6 (
Cement: 6 fine sand) (B) Convention
Half brick masonary in common burnt
clay building bricks having crushing
strenght not less than less than
18 kg/sq. cm. in cement Mortar 1:3 ( 1 21.60 Sqm 716.370
Cement : 3 coarse sand) in
superstructure above plinth level up to
floor two level Conventional (GF)
Providing and fixing M.S. Grills/Doors
to Granite frames of windows of
required pattern M.S. Box frame with
16mm dia polished bars M.S. bars
inserted & welded in it @ 12 Cm C/C
and M.S. Flats size 40 x 6 mm at for
frame and intermediate supports at
required spacing as per design or
fixed in wooden frame of window /
brick masonary with neccesory M.S.
angle, Flat, & other structural steel at
required spacing & frame alround
square or round bars with round
hended bolt & nuts or by screws
included cutting welding & febrication
etc. comp. including one coat of primer
and two coats of matt finished oil
painting etc complete {Fixing Outside}.
as per Architect' Direction. ( A ) Plain
Providing 15mm thick cement plaster
in single coat on Rough (Similar)side
of single or half brick walls for interior
20 plastering upto floor two level and 320.80 Cu.Mt. 171.800
finished even and smooth in (i)
Cement mortar 1:3 (1-cement:3-sand)
Providing 20 mm thick double coat
mala cement plaster on interior brick /
concrete work for plastering
comprising of base coat of 12 mm
thick cement plaster in cement mortar
21 (1 Cement : 4 coarse sand) in rough 232.59 Cu.Mt. 272.480
finishing and 8 mm thick top coat of
cement mortar 1:2 (1 Cement :
Coarse sand) finished with trovel
including scaffolding curing etc.
Providing and laying polished kota
stone slab 25mm thick in risers of
steps,skirting Dedo and pillars laid on
10mm thick cement mortar 1:3 (1-
22 Cement : 3 coarse sand) and jointed 543.51 Cu.Mt. 1089.670
with gray cement slury mixed with
pigment to match the shade of slab
including rubbing and polishing etc.
Wall painting (two coats) with plastic
emulsion paint over two coats of putty
& two coats of primer of approved
brand and manufacture on
23 undecorated wall surface to give an 320.80 Cu.Mt. 120.940
even shade including throughly
brushing the surface free from mortar
droppings and other foreign matter and
sand papered smooth.
Finishing wall with weather proof
exterior emulsion paint on wall surface
(two coats) to give an required shape
24 even shade after thoroughly brushing 232.59 Cu.Mt. 114.530
the surface to remove all dirt, and
remains of loose powdered
materials.etc complete
Wall painting two coats (including
priming coats) on new steel and other
metal surfece with enamel
25 paint,brushing interior to give an even 114.32 Sqm 122.490
shade including cleaning the surfece
of all dirt,dust and other foreign matter.
Steel work, welded in built up sections
framed work including cutting, hoisting,
fixing in position and applying a
priming coat of red lead paint. (A)In
beams and joists, channels angles
26 Tees, flats, with connecting plates or 109.70 Quintal. 9047.860
angle cleats as in main and cross
beams. Hip and jack rafters, purlins
conneted to common rafters and the
Providing corrugated G.I. sheet of
class-3 roofing fixed with galvanized
iron J or L Hooks, Bolts and nuts 8mm
diameter with bitumen and G.I. limpet
27 washer or G.I. limpet washer. filled 642.00 Cu.Mt. 727.130
with white lead complete excluding the
cost of purlins, Rafters and Trusses.(1)
0.80 mm thick sheet.
Providing and fixing 35mm thick
factory made moulded door shuter
consisting of solid core single/two leaf
flush door of 30mm thickness, lipped
with 15mm (5mm x 3) thick x 30mm
width on one stiles and top rail and
10mm (5mm x 2) thick x 30mm width
on the other stiles and bottom rails.
The inner panel laminated with 2mm
thick termite proof, water proof and fire
resistant moulded PVC sheet with
28 2,4,6 raised panel design in different 12.60 Sqm 2152.310
plain and /or prelim colours on one
side after routing the moulded design
on flush door and 2mm plain and/or
prelim PVC sheet on other side using
rubber adhesive on flush door and
solvent cement adhesive on the PVC
liping etc. complete as per direction of
Engineer in charge, manufacture’s
specification and drawing.
Providing and fixing FRP frame size
125x65 mm and 35mm thick FRP
shutter with wood grain raised
panneled design finish shutter having
extra reinforcement on sides & edges
in Gel coat finish. The core of the
shutter & frame is to be filed up with
injected polyurethene foam done in
29 situ alongwith embedded wooden 9.45 Sqm 2019.980
pieces for stiffening & also taking
hinges & fintures. The whole FRP
frame & shutter is to be water proof
weather proof, termite proof &
resistance to mild acid/alkali. Rates
are to be inclusive of S.S hinges with
fastener sleeve & alluminium fixtures &
Providing and fixing window having
extruded aluminum Colour anodized
section frame main outer size 95mm x
24mm x 1.17mm (of Jindal Section
horizontal Three track member size
92mm x 31.75mm x 1.30mm (of Jindal
Section no:8688,@ Wt.1.07 Kg/mt),
vertical member of size 92mm x
31.75mm x 1.50mm (of Jindal Section
no:8933,@ Wt. 1.06 Kg/mt) with sliding
30 shutters of horizontal member size 40 3.60 Sqm 1583.950
mmx18mm x1.29mm (of Jindal Section
no:8947@ wt.of 0.456 Kg/mt), vertical
member of size 40mm x 18mm x
mm (of Jindal Section no:8949 @ wt.of
0.456Kg/mt/ with 5 mm thick
transparent bronze colour tinted float
glass with powder coated aluminum
fittings and fixtures and transparent
silicon sealant glass fixing to frame as
per details etc.
Providing and fixing standared
extruded of alluminium section of size
63mm x 38.10mm x 1.2mm (Jindal
Section :2434, @ Wt. 0.643 Kg/mt)
31 with colour Powder Coated alluminium 2.52 Sqm 1175.560
frame for ventilation with 5 mm thick
frosted glass as details etc complete
for Ventilation
Constructing Sandwitch Platform of
mm thick Polished Black Granite at
top and 25 mm thick Kota stone slab
using cement mortar 1:3 for sandwitch
and fitting at Bottom and edgeswith
water proof regid adhesives including
making necessary grooves in wall with
Vertical Kota stone 30 mm x 2 No.
32 sandwitch thick every 60 cm center to 6.33 Sqm 3958.190
center including all labour material of
approved quality including full moulded
round front edge fixed in wall for
partition and jointed with grey cement
slurry including rubbing and polishing
P & L 24" x 24" vitrified 8 mm thick tile
flooring over 20 mm (average) base of
cement mortar 1:6 ( 1 cement:
coarse sand) on new surface or fixing
on existing flooring by adhesive
33 material including dismentaling of 48.12 Sqm 1397.830
existing flooring and jointed with color
cement slurry including finised with
flush pointing & cleaning the surface
etc. complete for DARK shade.
Providing and laying Ceramic tiles
6mm thick (vitrified 8 mm thick tile) in
skrting risers of steps and dedo on
10mm thick cement plaster 1:3 (1-
cement : 3-coarse sand) and jointed
with white cement slurry
Providing and laying Marbo Grenite
tiles 8 to 10 mm thick , 24'' x 24'' in
skrting risers of steps and dedo on
35 10mm thick cement plaster 1:3 (1- 10.41 Sqm 1141.450
cement : 3-coarse sand) and jointed
with white cement slurry.
Providing & laying and jointing in true
line and level 40 mm dia UPVC pipe
(SCH-40) line including fitting make or
equivalent as approved by engineer in
charge the pipe shole be fixed on wall
with the hel of clam at every two mtr
center to center or shall be conseled
as direct including necessesary fitting
etc including testing of pipe and jointes
and fixin the sam with adhesive
solvent including cost of matarial (A)
Providing & laying and jointing in true
line and level 25 mm dia UPVC pipe
(SCH-40) line including fitting make or
equivalent as approved by engineer in
charge the pipe shole be fixed on wall
with the hel of clam at every two mtr
37 center to center or shall be conseled 30.00 Rmt 91.840
as direct including necessesary fitting
etc including testing of pipe and jointes
and fixin the sam with adhesive
solvent including cost of matarial (A)
Providing & laying and jointing in true
line and level 15 mm dia UPVC pipe
(SCH-40) line including fitting make or
equivalent as approved by engineer in
charge the pipe shole be fixed on wall
with the hel of clam at every two mtr
38 center to center or shall be conseled 20.00 Rmt 72.650
as direct including necessesary fitting
etc including testing of pipe and jointes
and fixin the sam with adhesive
solvent including cost of matarial (A)
Providing and fixing Wash down Water
closet European type W.C. pan with
integral P or S trap including jointing
the trap with soil pipe in cement mortar
1:1 (1 cement : 1 find sand)
(A)Viterous china pattern - I (i)in white
colour With Providing and fixing
litres low level flushing cistern with a
pair of C.I. or mild brackets complete
with fittings such as lead value less
syphon 15 mm nominal size brass ball
valve with polythene float C.P. brass
handle unions and couplings for
39 connection with inlet, outlet and 3.00 No 4575.000
overflow pipes. 40 mm dia porcelain
enamelled flush bend including cutting
holes in walls and making good the
same conecting the flush bend with
cistren and closed Providing and fixing
plastic seat and cover for wash down
water closet with C.P. brass hinges
and rubber buffersProviding and fixing
toilet paper holder(A) C.P.
brass.Providing and fixing screw down
bib taps of follwing size(B) Brass
chromium plated screw down bib tap(i)
Providing and fixing water closet
squatting Pan (Indian type W.C. Pan)
size 580mm (Earthwork, bed concrete,
40 foot reste and trap to be measured 2.00 No 940.140
and paid for separately) (A) Vitreous
China.(I) Long pattern = White colour
Providing and fixing wash basin with
single hole for piller tap with C.L. or
M.S. brackets painted white including
cutting holes and making good the
41 same including piller tap brass waste, 6.00 No 1506.450
stopckok and MI fisher union fitting
waste pipe:(ii) flat back wash basin
500mm x 400mm size including all
nesessary fitiings
Providing and fixing Urinal of approved
quality inclding connection the urinal
the urinal with waste pipe tap etc
complete (A) white earthnware flat
42 back or corner type size 430mm x 3.00 No 1036.270
260mm x 3500 mm including fixing CP
Brass waste pipe white earthen ware
flate back or corner type size 130 x
Providing and laying Both side mirror
polished Granite stone slab 18 mm
thick of approved quality including Full
moulded Round front edge fixed in
43 wall for urinal patition and jointed with 2.60 Smt 2173.620
gray cement slurry including rubbing
and polishing etc. complete
Providing and fixing screw down bib
taps of following size of jaquar brand
44 product as approved by engineer in 11.00 No 186.830
charge (I) 15 mm dia.
providing and fixing SWR nanhi trap of
the following nominal dia of self
cleaning design with C L screwed
45 down of hinged grating including cost 6.00 No 606.080
of cutting and making good the walls
floos 100 mm inlet and 50 mm out let
Providing and fixing S.W. gully trap
with C.I. grating brick masonry
chamber and water tight C.I. cover with
46 frame of 300mm x 300mm size (inside) 5.00 No 1246.920
with standard weight.(i) Square mouth
traps.(B) 150mm x 100mm size P or R
Providing and fixing brass screw down
47 stop tap.(C) 25mm dia. 14.00 No 220.820
Providing and fixing UPVC spigot and
socket soil, waste and ventilating pipes
48 of the following nominal size. (B) 2.00 No 739.410
Providing and fixing UPVC spigot and
socket soil, waste and ventilating pipes
49 of the following nominal size. (B) 2.00 No 890.460
Providing and fixing to wall ceiling and
floor 10.0 Kg. F/Cm2 working pressure
poluthene pipes of the following
outside Dia. Low densidy, complete
50 with special falnge compression type 10.00 Rmt 339.050
fittings, wall clipsetc. including making
good the wall ceiling and floor.(G)110
Providing and fixing to wall ceiling and
floor 10.0 Kg. F/Cm2 working pressure
polythene pipes of the following
outside Dia. Low densidy, complete
51 with special falnge compression type 20.00 Rmt 280.230
fittings, wall clipsetc. including making
good the wall ceiling and floor.(F)
Constructing brick masonry chamber
for underground C.I. Inspection
chamber and bends with briocks
having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with
frame (Light duty) 455mm x 610mm
intenal dimensions total weight of
cover with frame to be not less than
38Kg. (Wt. of cover 23 Kg.) and Wt. of
frame 15Kg. ) (R.C.C. top slabe with
52 1:2:4 mix (1-cement :2- coarse sand :4- 1.00 No 3660.760
graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar
1:3 finished smooth with a floating coat
of neat cement on walls and bed
concrete etc. complete.(ii) Inside
dimensions 500mm x 700 mm and
450mm deep for pipe line with one or
providing and fixing in position cowl
53 vent to pipe (II) 100mm 8.00 No 501.870
Providing and fixing G.I. Rain water
54 spout of 50mm dia. and 30cm. length. 17.60 Rmt 101.910
Constructing Brick masonry road gully
chamber 500mm x 450mm x 600mm
including 500mm x 450mm C.I.
horizontal grating wih frame complete.
Constructing brick masonry chamber
for underground chamber (Kharkuva)
with bricks having croshing strength
not less than 35Kg. Cm2 in C.M. 1:5
with (R.C.C. top slab with 1:2:4 mix
including Beams (1-cement : 2- coarse
sand : 4-graded stone aggregate
20mm size) foundation concrete 1 : 4 :
56 8 inside plaster 15mm thick with 1.00 No 51301.940
cement mortar 1:3 finished smooth
with a floating coat of neat cement on
walls and bed concrete etc.
complete.(ii) Inside dimensions
mt. dia x 1.25 mt deep = 5.00 Cu.mt.
for pipe line with one or two inlets.
Providing erecting and fixing double
coated Syntex PVC. (ISI) water tank of
57 required capacity each with all 3000.00 Ltr 3.950
necessary fittings and connection etc.
complete on terrace.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
4-Specification - Atalwadi.pdf
Atalwadi.pdf
Building-Specification Book.pdf
SBD- Atalwadi.pdf
Schedule B Atalwadi.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .