PROVN OF TOILET BLOCK WITH ATTACHED BATHROOM OF HQ 39 MTN DIV CAMP SPECIAL REPAIR OF RETAINING WALL BEHIND HQ COY COOK HOUSE APPROX 15 MTR LONG AND 3 MTR HEIGHT AND CERTAIN SANCTIONED WORKS AT PALAMPUR MIL STN

Amount

Surface excavation n exc 30cms deep and averaging 15 cms deep and getting out in any type of soil, complete all as specified.

Excavation in trenches any type of soil n exc 1.5 m wide and n exc 1.5 m in depth for foundation, complete all as specified.

M&L Cement concrete type D-2, 1:4:8 (Using 40 mm graded aggregate) in fondation, filling and mass concrete, complete all as specified.

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius with old size bricks, built in CM: 1:6, complete all as specified.

M&L for 15mm thick rendering on fair faces to brick work surface in CM 1:6 finished the surface even and smooth (without using extra cement on internal wall surface, complete all as specified.

M&L for 15mm thick rendering on fair faces to brick work on PCC block surface in CM 1:4 finished the surface even and smooth (without using extra cement on external wall surface, complete all as specified.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

Mild steel TMT bars 5mm dia and over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed .

M&L for reinforced cement concrete M-25 (Design mix) using 20 mm graded aggregate as foundations, including rafts footings, foundation beams, plinth beam, bases for columns etc, complete all as specified.

M&L for reinforced cement concrete M-25 (Design mix) using 20 mm graded aggregate as beams over 1.5 m span, complete all as specified.

Formwork to sides of concrete foundation, footings bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical to rough finished surface of concrete, complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc, also splays between floors and beam, etc, to rough finished surface of concrete

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of any type of soil, complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a leel n exc. 1.50m above the starting point, complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165), complete all as specified.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering, complete all as specified.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, complete all as specified.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:4, for laying floor finish, complete all as specified.

M&L for Non skid ceremic coloured tiles 7 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for Glazed ceramic coloured tiles 300 mm x 200 mm x 5 to 6 mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match over and includind 10 mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified.

M&L for broken stone hardcore of gauge n exc 63mm, deposited spread and levellied in layers n exc 15 cm thick watered and rammed to a true surfaces, complete all as specified.

M&L for 75mm thick PCC 1:3:6, type C-2 (Using 20 mm graded crushed stone aggregate) as in plinth protection etc and finished even without using extra cement, complete all as specified.

Preparing of newly plastered wall surface and applying two coat oil bound distemper on newly plastered surfaces, complete all as specified

Preparing of newly plastered or AC board surface as ceiling and applying three coat white wash on newly surfaces, complete all as specified

Preparing of newly plastered surface and applying two coat cement base paint on newly plastered surfaces, complete all as specified

Preparetion of new steel surfaces and applying two coats of synthetic enamel over a coat of red oxide primer.

M&L for rotational moulded polyethylene water storage tanks Capacity 1000 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specifed in SSR Part-I, complete all as specified.

M&L for pillar taps, cast copper alloy fancy type size 15mm capstan heads, chromium plated, scewed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified.

M&L for bore of tubing 15 mm, medium grade, galvanised with all fitting and fixed, complete all as specified.

M&L for bore of tubing 20 mm, medium grade, galvanised with all fitting and fixed, complete all as specified.

S&F for stop valves 15mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for uniouns and fixed, complete all as specified.

S&F for cast iron soil, sand cast wast and vent pipes size 100 mm bore of pipe in any length with or without ears, with cement joints, laid in trenches as in floors, complete all as specified.

S&F for cast iron soil, sand cast wast and vent pipes size 75 mm bore of pipe in any length with or without ears, with cement joints, laid in trenches as in floors, complete all as specified.

M&L for cement concrete type D-2 1:4:8 concrete bed for 100 mm bore of pipe to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in complete all as specified.

M&L for cast iron floor trap size 100 mm dia with grating including jointing to waste pipe fixed in cement mortar type B-1 (1:2:4), complete all as specified.

M&L for cast iron floor trap size 75 mm dia with grating including jointing to waste pipe fixed in cement mortar type B-1 (1:2:4), complete all as specified.

S&F for vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe etc, complete all as specified.

S&F for 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe, PVC connection 15 mm size with PTMT nuts of length 450 mm and with CP brass coupling & PVC washer at both ends, complete all as specified.

S&F for vitreous china wash basin, angle block size 600X480mm white, excluding traps, waste chin and plug and porcelin stopper but including brackets, complete all as specified.

S&F for Vitreaus china bowl urinal flat block, size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excuding flushing cistern, flush pipe and waste pipe) complete urinal against wall in cement mortar 1:2, securing long brass screws, pointing around urinal back in cement complete all as specified.

S&F for bib taps, cast copper alloy size 15mm with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified.

S&F for soap dish any type fixed to plugs with chromium plated brass screw, complete all as specified.

S&F for towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms), complete all as specified.

S&F for PVC Wast water pipe 32mm or 40mm dia 750mm long for WHB/Sink.

S&F for brass chromium plated shower rose size 125 mm with or without swivel joints, including fixing to steel pipe or union, complete all as specified.

M&L for 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete.

S&F for 35 mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified.

S&F for 35 mm thick 2nd class hardwood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass, guaze, etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and metered beads for securing glass etc . sizes of members of shutters for door as specified in SSR-I , section-8, clause-8.24(a); supplied and fitted to chowkats, complete all as specified.

S&F for 30 mm thick 2nd class hardwood glazed and skeleton shutters , open rebated and prepared to receive glass, guaze, etc.(with sash bars), edges of framing plain chamfered or rounded fitted with cut and metered beads for securing glass etc . size of members of shutters for windows, ventilators, etc are provided with stiles and rails as specified in SSR-I , section-8, clause-8.24(b), complete all as specified.

S&F Solid PVC door frame of size 50 mm x47 mm made out of 15 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per spacification & drawing shown in SSR Part-II, complete all as specified.

M&L made soild panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in SSR Part- II, complete all as specified.

S&F for 100mm size butt hinges medium weught , cold rolled MS, complete all as specified.

S&F for 75mm size butt hinges medium weught , cold rolled MS, complete all as specified.

S&F for 150mm size aluminium anodised, barrel tower bolts, of extruded section, complete all as specified.

S&F for 150mm size Handles extruded aluminium alloy handles, fabricated type anodised, complete all as specified.

S&F for 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast-aluminium alloy, complete all as specified.

S&F for 300mm Mild steel rate tail rod pattern springs including roller and roller plate complete all as specified.

S&F for 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door/windows stops and the like, including all necessary' labours; articles n exc 200 cu.cm each including butt hinges, size 50 mm, medium weight, cold rolled mild steel, and fixed complete all as specified.

S&F for 4mm thick sheet glass, ordinary quality and glazing with oil putty/ beading in square n.exc. 0.5 sqm in each pane, complete all as specified.

S&F for steel work such as in hold fasts conforming to similar articals Fe-290 Gde E-165, complete all as specified.

M&L for PCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in hold fasts/ bed blocks/ coping etc, all as specified.

M&L for Preparation of new or previously untreated wood and wood wood based surfaces of any description, over 10 cm in width or girth and finishing, applying two coat with synthetic enamel paint over pink primer, complete all as specified.

M&L 2nd class soft wood ( Kail ) clean sawn as in vertical post or roof members, complete all as specified.

M&L for 2nd class soft wood plain fillets square, rectangular or triangular in section, clean sawn, exc 13 and n exc 25 sq cm , se-cured with nails, complete all as specified.

M&L plain fillets square or rectangular in section bullnosed chamfered or rounded or rounded on one edge or face with nails sectional area exc. 3 sqcm but n. exc 6 sqcm, 2nd class soft wood Kail, complete all as specified.

S&F asbestos cement plain building boards fixed to timber frame work fixed with screws 4mm thick sheet.

M&L for 75mm thick PCC 1:4:8 type D-2 (40 mm graded aggregate) as sub-base, complete all as specified.

M&L for 40mm thick PCC 1:2:4 type B-1 mix (using 20 mm aggregate) as in floor finishing even and smooth without using extra cement, complete all as specified.

M&L for 38mm glass dividing strips, 3mm thick, complete all as specified.

S&F mild steel square bar for framed work such as grills with ends of bars shouldered and riveted, or forged into spikes; framed guard bars con-forming to Fe-290. Gde-E-165, complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete complete, all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Excavation over area not exc 1.5 m deep & getting out in any type of soil all as specified and directed.

Plain cement concrete M-10 (nominal Mix) using 40mm graded crushed stone aggregates as in foundation , filling & mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix) using 20 mm graded aggregate as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified.

Supply only 75mm dia PVC (SWR) pipes, single socketed in any length as in weep holes, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

M&L for loose filling with stone aggregates of gauge 40 to 80mm behind the retaining wall complete all as specified and directed.

Plain cement concrete, M-15 (Nominal Mix), type B-1 (using 20 mm graded crushed stone aggregates) as in surface channel and drain, complete all as specified and directed.

Extra for forming fair finished drain or channel exceeding 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and directed.

SCHEDULE 'A' PART-II: Point wiring for one light point controlled by one switch 5 amp one way with cable of size 1.5sqmm copper conductor cable multi strand PVC insulated FRLS (unsheathed ) concealed type, drawing in and incl PVC conduit 25mm dia having wall thickness not less than 2 mm with sunk cast iron/ pressed steel terminal boxes made out of 1.2 mm thick sheet including one coat of red oxide prima on internal and external surface covered with 3 mm thick hylam brand IS-2036 marked laminated sheet cover for mounting switches , sockets, regulators etc controlled by one , one way switch, incl 1.5sqmm PVC insulated copper conductor contineous earth wire complete, all as specified.

All as per serial item No 85 here-in-before but for one fan point/Exhaust fan controlled by one, one way switch and regulator complete all as specified.

All as per serial item No 85 here-in-before but for 3 pin socket outlet 15 amp independent board with cable of size 2.5 sqmm in point wiring and 1.5 sqmm in contionous earth wire complete all as specified.

M&L complete for switch piano flush type single pole one way 5 amp complete all as specified and directed.

M&L complete for switch piano flush type single pole one way 15 amp complete all as specified and directed.

M&L complete for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

S&F of ceiling rose surface type 65mm x 50mm 3 terminal complete all as specified and directed

Supply and fixing LED box type tube light fitting suitable for 1x20W 4 FT complete with LED tube rod, fixed complete to wall/ceiling and PVC round/square block (02 Nos) of suitable size etc provided complete with flexible pipe of suitable size complete all as specified and directed.

Supply and fix LED bulk head luminaire IP-65 with LED bulb 10 W complete all as specified.

Supply and fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with LED lamp 10 watt complete all as specified and directed.

Supply and fix MCB distribution board sheet steel powder coated SPN 4 way double door IP-42 protection with 200 Amp rated busbar 240 Volt complete all as specified.

Supply and fix MCB SPN 40 Amps 10 KA 230 volts 'C' series complete all as specified and directed.

Supply and fix MCB SP 6 to 32 Amps 10 KA 230 volts "C" series complete all as specified and directed.

Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr deep below normal ground level, connected to 4mm dia galvanized iron wire as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel complete with 15mm dia light grade protection pipe, 20mm dia GI light grade watering pipe with funnel including char coal dust, salt, PCC 1:2:4 in pit with precast RCC M-15 cover reinforced with XPM not less then 4.00 Kg per sqm including necessary earth work in any type of soil, removal of surplus soil to a distance not exc 50m, returning filling in complete as shown in electrical plate No 3 of SSR Part-I (2009), and connected to earthing test point all as specified or indicated, including testing on completion. Note: The rates for earthing includes the cost of earth lead and protection pipe upto 7.50m length.

Supply and fixing of exhaust fan (metel body) AC single phase 230 V of size 300 mm sweep 1400 RPM with louvers shutter complete all as specified and directed.

SCHEDULE 'A' PART-III: Supply & laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.

Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

M&L for sand cushioning to underground cable as per clause No 19.75 of SSR Part-I laid with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable. The top layer of 15cm shall be punned to 10 cm (total 23 cm) complete all as specified and directed.

Sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed.

Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed.

SCHEDULE 'A' PART-IV: Excavation, in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying GI pipe line in hard / dense soil and getting out complete all as specified & directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick all as specified & directed.

Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenchs/floors/wall complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) all as specified of the 20mm size complete all as specified and directed.

Supply and fixing Gun-metal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends (ISI marked) of 20mm dia complete all as specified & directed.

M & L for cutting of existing GI pipe line of size 50 mm size (02 cuts) in position for making branch connection 20mm dia for inserting of Tee complete including Tee of required size and other fitting such as sockets, nipples, unions etc complete including making threads in position for both side as per site requirement.

BHARDWAJ BUILDERS