Annual Plan-Malappuram District Panchayath Completion works for Thekkil kadavu Lift irrigation project at Elamkulam Electrification-S0347-25 - General Electrical Work

Amount

wiring

OD328027/2024-2025:Supply, installation testing and commissioning of 90 HP or nearest suitable size Vertivcal open well submersible or suitable pump set 2850 rpm at rated voltage 3 phase 380/415V 50HZ AC supply 90DX 6 90 150mm (6") S.D DECCAN/CRI/Kirloskar or similer make delivery size 150 mm or nearest size having standrd discharge using leak proof materials as required and suspended on existing rope/proposed/steel rope including fixing G.I Pipe for Submersible Pumps as delivery pipe connected one by one to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including giving onnection and trial run etc as per the direction at site

OD328185/2024-2025:Supply, conveyance, installation testing and commissioning of fully automatic Star-Delta starter suitable for motor pump of the following ratings 125 HP/90 KW 66-110 A, ML6 FASD AC3 duty 415 V, 50Hz, 3ph in rigid sheet enclosure and giving connections etc as required. L&T/eauivalent make

OD329392/2024-2025:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary copper socket and giving connections of the following sizes.50 sq mm

OD329441/2024-2025:Supply, Providing, laying and fixing 150 dia ornearest size G.I Pipe ( heavy duty) for supporting /as delivery pipe of the top of the tank, The pipe placing across/ horozondal to the river/well and clamping each other using required accessories etc as required at site

90.6.4.62:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.16.00 sq.mm 3 Run

90.12.7.32:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 120 sq mm

9.1.25:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

90.12.9.4:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench77/63 mm or nearest size

OD327603/2024-2025:Supply, threading ,laying and jointing of the 50 mm "B' class GI pipe with all required accessories in ground/clamping as assupport pipe etc as required.

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD327599/2024-2025:Supply and providing 25x6mm brass nut and bolt etc. as required

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

2.2.15:Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200 Amp, 36 KA

OD329482/2024-2025:supply and Providing and fixing following capacity 4pole On-Load Change Over unit inside the existing panel board including drilling holes in cubicle panel, making connections, etc. as required 160A, 4 pole On-Load Change Over switch

2.1.5:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 Amp TP&N

90.14.11.2:MCCB AccessoriesSupply and fixing one number earth fault Relay up to 125A to 200A with CBCT.

90.14.24.12:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.25 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor, suitable for direct connection to motors.

OD329443/2024-2025:Supplying and fixing 150/5 A, 5VA, accuracy class 0.5, Tape wound Metering CT , in existing panel board

OD327594/2024-2025:Supply and fixing Digital multifunction meter to read V,A,F, PF-3 Phase accuracy class 1 LED

OD329804/2024-2025:Supply and providing 150mm or nearest size dia Cast Iron Non Return Valve (Zoloto, Kranti L&T or eaqualent)

MOHAMMED MUSTHAFA K. (BID ID -2217011)

ANSARI KUNDIL (BID ID -2217028)

P. R. RIJESH (BID ID -2217242)

Bidder Name

ANSARI KUNDIL

P. R. RIJESH

MOHAMMED MUSTHAFA K.

UNNI K