Kerala

AOC

Works

Civil Works - Buildings

Annual Plan-298/2024-25 Additional Facility of Koothattukulam MCF

Local Self Government Department

VECHOOCHIRA | Pathanamthitta, Kerala

Amount: ₹6.2 LCloses: 8 Apr 2025Closed

Timeline

Published1 Apr 2025
Closed8 Apr 2025
Awarded28 Jul 2026

Bids

Item Rate

2 Bids28 Jul 2026

#	Company	Amount	Rank	Status
1	JOSEPH PHILIP L1₹6.2 LAccepted-AOC PULICKAL HOUSE VECHOOCHIRA \| KERALA	₹6.2 L	L1	Accepted-AOC L1
2	PHILIP L2₹6.9 L+₹73,682.78 (11.9%)Rejected-AOC	₹6.9 L+₹73,682.78 (11.9%)	L2	Rejected-AOC L2

BoQ Comparative

Line Items (7)

Sl No	Description	Qty	Unit	JOSEPH PHILIP L1	PHILIP L2
1.00SHED
1.00	OD542346/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	60	sqm	700 ₹42,000 Lowest	800 ₹48,000
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	476	kg	190 ₹90,440 Lowest	200 ₹95,200
1.00	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	268.8	kilogram	190 ₹51,072 Lowest	200 ₹53,760
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	840	kg	150 ₹1,26,000 Lowest	160 ₹1,34,400
1.00	50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge	69.39	cum	288 ₹19,984.32 Lowest	300 ₹20,817
2.00DR Masonry
2.00	OD545733/2024-2025:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site	54.9	cum	5,071 ₹2,78,397.9 Lowest	6,000 ₹3,29,400
2.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	1.3	cum	7,857 ₹10,253.39 Lowest	7,857 ₹10,253.39 Lowest

Tender Value

₹6.2 L

EMD Value

₹15,534

Closing Date

8 Apr 2025, 5:00 pmClosed

Tender Inviting Organisation

Name

ASSISTANT ENGINEER LID AND EW SECTION VECHOOCHIRA

Address

ASSISTANT ENGINEER LID AND EW SECTION VECHOOCHIRA

Work Description

Annual Plan-298/2024-25 Additional Facility of Koothattukulam MCF

Tender Information

Tender ID

2025_LSGD_757395_1

Reference Number

298/2025

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Location

VECHOOCHIRA

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredINTEGRITY (.pdf)

RequiredEPAYMENT (.pdf)

RequiredSBD (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,370

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹15,534

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

28 Jul 2026

Published

1 Apr 2025

Bid Opening

9 Apr 2025

Download Starts

1 Apr 2025

Download Ends

8 Apr 2025

Submission Starts

1 Apr 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1230606.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

JOSEPH PHILIP

L1₹6.2 LAccepted-AOC

PULICKAL HOUSE VECHOOCHIRA | KERALA

PHILIP

L2₹6.9 L+₹73,682.78 (11.9%)Rejected-AOC

Sl No	Description	Qty	Unit	JOSEPH PHILIP L1	PHILIP L2
1.00SHED
1.00	OD542346/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	60	sqm	700 ₹42,000 Lowest	800 ₹48,000
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	476	kg	190 ₹90,440 Lowest	200 ₹95,200
1.00	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	268.8	kilogram	190 ₹51,072 Lowest	200 ₹53,760
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	840	kg	150 ₹1,26,000 Lowest	160 ₹1,34,400
1.00	50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge	69.39	cum	288 ₹19,984.32 Lowest	300 ₹20,817
2.00DR Masonry
2.00	OD545733/2024-2025:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site	54.9	cum	5,071 ₹2,78,397.9 Lowest	6,000 ₹3,29,400
2.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	1.3	cum	7,857 ₹10,253.39 Lowest	7,857 ₹10,253.39 Lowest

Sl No

Description

Qty

Unit

JOSEPH PHILIP

PHILIP

1.00SHED

1.00

OD542346/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sqm

700

₹42,000

Lowest

800

₹48,000

1.00

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

476

190

₹90,440

Lowest

200

₹95,200

1.00

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

268.8

kilogram

190

₹51,072

Lowest

200

₹53,760

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

840

150

₹1,26,000

Lowest

160

₹1,34,400

1.00

50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

69.39

cum

288

₹19,984.32

Lowest

300

₹20,817

2.00DR Masonry

2.00

OD545733/2024-2025:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

54.9

cum

5,071

₹2,78,397.9

Lowest

6,000

₹3,29,400

2.00

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

1.3

cum

7,857

₹10,253.39

Lowest

7,857

₹10,253.39

Lowest