Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC 275 GOLE BUILDING ROAD 1ST B ROAD SARDARPURA JODHPUR RAJ 342003 | JODHPUR | RAJASTHAN | 342003 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹43.7 L+₹2.9 L (7.16%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-Finance Being not Lowest | |
| 3 | L3₹48.8 L+₹8.0 L (19.7%)Rejected-Finance | L3 | Rejected-Finance Being not Lowest | |
| 4 | L4₹62.0 L+₹21.2 L (51.9%)Rejected-Finance BFH 20 SHALIMAR BAGH DELHI 110088 | DELHI | NORTH WEST DELHI | DELHI | 110088 | L4 | Rejected-Finance Being not Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
14 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR
85931 E8 Repairs to Joints and cracks using epoxy resin mortar and elastomeric concrete of rigid portion and application of PME on flexible portion at AF Stn Jodhpur
2022_MES_522644_1
85931/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF JODHPUR
AS PER NIT
7 documents required · 7 mandatory
₹500
GE AF JODHPUR
₹90,000
Yes
9 Jul 2022
7 May 2022
16 Jun 2022
7 May 2022
14 Jun 2022
31 May 2022
7 May 2022 - 9 May 2022
60 days
Amount
NOTE FOR ITEMS NO. 02 TO 08 :- The work will be carried out as per user requirement from 1830 hrs to 0600 Hrs. The deployment of labour and T&P arrangement on the Runway shall be intimated to the contractor by 0800 Hrs each day in the morning. The contractor has to provide necessary arrangement such as lights etc and quote the rate accordingly for considering late working hours at night. Nothing extra will be paid on this account.
M&L for raking out sealing compound from existing expansion joints of dimension 25 mm to 30 mm wide and 45 mm deep, removing the debris from site by sweeping the concrete surface with brooms, cleaning with compressed air, treating sides and bottom of the joints with primer as per manufacturer's instruction and filled with preformed closed cell polyethylene backup rod/strip of 25-32 mm dia, sealing with pitch free polyurethane grey sealant (minimum depth of sealant above backup rod shall be 10 mm) conforming to BS-5212 (Type FB) and applying masking tape on edges of joints to prevent accidental spillage of sealant and removing the masking tape after application of sealant complete all as specified and directed. Note :-Incase of any variation in width or depth of joint, the same is deemed to be included in quoted rates by the contractor as in Sch 'A'/BOQ items as above. The contractor shall not be entitled for any extra claim on this account.
M&L for raking out sealing compound from existing construction/dummy joints of dimension 16 mm to 24 mm wide and 40 mm deep, removing the debris from site by sweeping the concrete surface with brooms, cleaning with compressed air, treating sides and bottom of the joints with primer as per manufacturer's instruction and filled with preformed closed cell polyethylene backup rod/strip of 16-25 mm dia, sealing with pitch free polyurethane grey sealant (minimum depth of sealant above backup rod shall be 10 mm) conforming to BS-5212 (Type FB) and applying masking tape on edges of joints to prevent accidental spillage of sealant and removing the masking tape after application of sealant complete all as specified and directed. Note :-Incase of any variation in width or depth of joint, the same is deemed to be included in quoted rates by the contractor as in Sch 'A'/BOQ items as above. The contractor shall not be entitled for any extra claim on this account.
M&L for raking out sealing compound from existing construction/dummy joints of dimension 10 mm to 15 mm wide and 30 mm deep, removing the debris from site by sweeping the concrete surface with brooms, cleaning with compressed air, treating sides and bottom of the joints with primer as per manufacturer's instruction and filled with preformed closed cell polyethylene backup rod/strip of 13-18 mm dia, sealing with pitch free polyurethane grey sealant (minimum depth of sealant above backup rod shall be 10 mm) conforming to BS-5212 (Type FB) and applying masking tape on edges of joints to prevent accidental spillage of sealant and removing the masking tape after application of sealant complete all as specified and directed. Note:-Incase of any variation in width or depth of joint, the same is deemed to be included in quoted rates by the contractor as in Sch 'A'/BOQ items as above. The contractor shall not be entitled for any extra claim on this account.
Material and Labour Chipping and/or neatly Cutting of existing loose concrete at cracks on Runway/Taxi track/ pavement by using diamand cutter. Cutting of cracked portion shall not be less than 100 mm wide and 45 mm deep. Cleaning the dirt and all loose material fanned with air blower and air blasting the cleaned surface applying proprietory primer on surfaces to obtained tack and finally filling in Elastomeric Concrete, (Mix shall be prepared as per manufacturer's instruction) to obtained a true surface and finally tooling the set surface with hand tools complete all as specified and directed. Note :- (i) The rate shall be include for providing masking tape at joints and formwork required if any at spalled joints edges. (ii) The quoted rate deemed to be included for making good to disturbed joint filling around the area where material is applied. (iii) All material shall only be procured directly from manufacturer.
Material and Labour Cutting existing loose patches / spalled edges of concrete pavement in square / rectangular/ triangular shape to a depth not less than 25mm removing debris out side MD land sweeping the patches with broom, cleaning with compressed air and applying epoxy resin mortar (proportion as specifed) incl necessary form work for sides of joints, sprinkle , a thin layer of dust free fine sand (QUARTS SAND 10 No) and applying a coat on top of surface with epoxy resin primer @ 0.45 Kg/Sqm and finally filling the joints with sealing compound complete all as specified and directed.
M&L for cleaning the surface by brushing with wire brushes for removing caked mud etc, sweeping with compressor air blower to remove all loose dust and dirt etc/taking out dust/ existing material with compressed air and making the surface free from dust, drying the surface and applying Two coats of polymeric modified emulsion (PME) by using self propelled emulsion distribution uniformly or towed emulsion pressure sprayer , equipped for spraying the PME uniformly and mopping the total undiluted PME @ 1.00 litre per sqm in two coats in ratio 1:1 (PME: water) and ensure uniform finish of total area complete all as specified and directed. Note:- The tenderer shall take into consideration the following points while quoting his rate for the above item:- (i) No price adjustment shall be applicable if excess quantity of polymer modified emulsion mentined above is used, depending upon conditin of the surface to be treated. (ii) Special care shall be taken to fill gaps/cracks with 6mm to 2.36 mm size coarse sand as per manufacturers instructins and quoted rate is included for repair of gaps/cracks. (iii) Cost of trial patch 15mx15m deemed to be included in rates quoted for above item.
S&F in repairs High intensity prismatic grade retro reflective self adhesive sheeting on runway DTGM board,size of letters 100 cm to 110 cm high,70 cm to 80 cm wide with letter width of 15 cm to 16 cm fixed in DTGM board (0,1,2,3,4,5,6,7,8,9 and M) complete all as specified and directed by Engineer-in-Charge. Make:- 3M, dark Eye or equivalent as approved by GE.
ABHOG INFRASTRUCTURE PRIVATE LIMITED
NAIRA CONSTRUCTIONS AND MANAGEMENT SERVICES
NEW GURBINDER INDUSTRIES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .