PROVN OF FIRE FIGHTING IN SURGICAL AND MEDICAL WARD OF MH AHMEDABAD

Amount

Supply, installation, testing & commissioning of terrace pump, conforming to IS-12469 : 1988, with CI casing, bronze impeller and stainless steel shaft, mounted on heavy duty bearings, suitable for 3-Ph, 440V, 50 Hz AC supply and having 36m head and 900 LPM discharge, including suitable starter and platform as per manufacturer's recommendation complete all as specified and directed. (NOTE : Suction & delivery pipes including suitable PCC foundation,nut bolts etc up to 6.0m are deemed to be included in the quoted rate of item.) (Make: Kirloskar/CG) (1 working+1stand by) complete all as specified and directed.

Supply, laying and testing of ISI marked mild steel ERW pipes with and including site welded flange, conforming to IS 1239 (Heavey Duty) (Part-I), complete including jointing with welding and flange fittings, supports and painting, one coat of primer and two coats of corrosion resistant paint conforming to IS 2379 : 1990 as specified of 100mm NB complete all specified and directed. Note:- Work includes core cutting on roof/wall/chajah or any other indicated situation for providing pipe all directed at site. The rate for the same shall be deemed to be included in the item rate. Make TATA/ Jindal complete all as specified and directed.

Supply, installtion, testing and commissioning of PN 1.6 rated 100mm NB CI 'Y' type strainer for suction conforming to IS : 907-1984 with SS filter screen and flange drilling standard end connection conforming to IS : 1538-1993 and necessary accessories for suction side of fire pumps all complete as specified and directed.

S & F cast iron sluice valve 150mm bore conforming to IS : 14846-2000, PN 1.6, non-rising spindle type, complete with matching flanges, nuts, bolts, gaskets of following size complete all as specified and directed. (Make : Kirloskar/Leader/L&T (AUDCO)/New Age complete all as specified and directed.

S & F cast iron non-return valve 100mm bore conforming to IS : 5312 (Part 1)-2004, Wafer type, complete with matching flanges, nuts, bolts, gaskets of following size complete all as specified and directed. (Make : (AUDCO)/New Age complete all as specified and directed.

S & F ball valve of gun metal construction, rising spindle type, PN 1.6 rating with screwed ends, tested up to 10 bar pressure complete as specified of 25mm size complete all as specified and directed. (Make : Sant/Zoloto) complete all as specified and directed.

S & F pressure gauge of 0-14 bar range, with 100mm dial, isolation cock, syphon tube, etc. complete all as specified and directed. (Make : Fiebig/H-Guru) complete all as specified and directed.

S & F internal hose box made of 1.6mm thick MS sheet of 800mm x 600mm x 250mm size with double door with 4mm thick glasses and door frame made of 16 gauge MS sheet duly painted with one coat of primer and two coats of post office red synthetic enamal paint externally and two coats of white colour synthetic enamal paint inside complete all as specified and directed. (Make : AAAG/WIMCO) complete all as specified and directed.

S & F outdoor type lockable hose cabinet made of 18 gauge MS sheet of size 800mm x 600mm x 250mm size with double door with 4mm thick glasses and door frame made of 16 gauge MS sheet painted two coats of fire red outside and brilliant white inside over a coat of primer suitable to house two sets to hose RRl hose and gunmetal branch pipe, including fixing on angle iron frame of size 40mm x 6mm all complete as specified and directed.

S & F non-percolating, rubber reinforced, lined fire hose pipe (as per IS : 636-1988, type-B) of 63mm diameter and 15m length complete with ISI marked brass male & female coupling (as per IS : 903-1993), bound rivetted to hose pipe with copper rivets complete as specified. (Make : New Age/AAAG)

S & F branch pipe, short, gunmetal of size 63mm diameter, male instanteneous inlet and thread outlet with 15mm bore nozzle conforming to IS : 903 complete all as specified and directed. (Make : New Age/AAAG)

S & F swivelling type first-aid hose reel in red colour drum, with 36m long and 20mm diameter heavy duty rubber water hose, 20mm diameter globle valve stop cock, terminating with gunmetal coupling and nozzle of 6mm outlet with shut off valve, conforming to IS : 8090-1976 complete with MS socket for tap-off, drum and brackets (including painting), for fixing on wall with anchor fastner, bolts and nuts conforming to IS : 884-1969 complete as specified. (Make : AAAG/WIMCO)

Supply, installation, testing and commissioning of fire brigade inlet connection of 2-way with 2 No, 63mm dia. Built-in gunmetal Non Return valves, instantaneous coupling type arranged on 150mm dia pipe manifold and connected to wet riser main as well as to fire water tank. Quoted rate shall be included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of suitable size with mounting supports etc. complete all as specified and directed. (Make : New Age/Shah Bhogilal (AAAG)

M&L Earthing complete with galvanisedsteel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all specified and directed

S&F Air Cushion tank with relief valve 200 mm all specified and directed

Supply and Fixing Hydrant valve single headed all specified and directed

Supply and Fixing copper strip 20mmX3.15mm mm all specified and directed

S & F LT Panel 2 mm thick indoor wall mounted type dust and verminproof, free standing compartmentalized power coated with 100Amps busbar(TPN) fixed on epoxy based including (i) MCCB 63 Amps,4 pole 25 KA - 01 (ii) MCB TPN 20Amps 10KA c seres - 02 (iii) Dol Starter 7.5 HP suitable for 3 Phase motor ( at sl No 1 ) - 02 (iv) Multifunction meter for measurement of voltage, current,frequency including CTs

Air release valve 25mm dia

S&F Portable 4.5 Kg Fire Extinguisher carbon dioxide, body is constructed by hot spinning of seamless pipe and brass forged discharge valve,Extinguisher is enamel spray painted complete all as specified and directed.

S&F Portable 6 Kg Fire Extinguisher ACB Type , body is constructed by hot spinning of seamless pipe and brass forged discharge valve,Extinguisher is enamel spray painted complete all as specified and directed

S&F Extinguisher ACB Type 75 kg (±2%) dry powder, Constructed of MS Sheet by MIG Welding process and brass forged cap, Internally & Externally epoxy powder coated. As a propellant it is provided with CO2 2kg cylinder (Confirms to IS:7285).

Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 16Sqmm 4 Core complete all as specified and directed. Make - Havells. Note: Earth work ( Excavation, Returning & refilling and removal), sand cushining , cable protection cover, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.

Steel tubes ISI marked light grade galvanised with all fittings fixed to walls / poles as required of sizes 40 mm. Make: Jindal/Surya prakash

Labour & tools for horizontal boring through road / path / floor for passing UG cables by using trench less technology for laying upto 80mm dia GI pipe complete all as required. Note : GI pipe will be measured and paid seperately.

Excavation in trenches in any type of hard/dense soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be fined sand as specifed and punned thickness shall be measured and paid.

Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

Supply and lay pipe ductile iron ,S/S including specials ,class K-9 ,150 mm dia.all specified and directed by Engineer-in-charge.