Kuttippuram Block Panchayath - Project.No. 79 - Kuttippuram Taluk Hospital WSS- Providing motor pump set and Electrification.

Amount

Electrification.

5.4: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD: Supplying and Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

OD: Supply, providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

90.16.1.3: Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG)

90.16.5.3: Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required. 3.15 mm (10 SWG)

OD: Supply and providing 25x6mm brass nut and bolt etc. as required.

90.14.1.2: Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

2.2.14: Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.125 Amp, 36 KA

90.14.11.2: MCCB Accessories - Supply and fixing one number earth fault Relay up to 125A to 200A with CBCT.

OD: Supply and providing 150/5 A, 5 VA, accuracy class 0.5, Resin Cast Metering CT

90.14.24.7: Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.7.5 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors.

OD: supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

OD: Supply and fixing Digital Multifunction meter to read: V, A, F, PF-3 phase accuracy class 1, LED Display

OD: Supply and fixing Danger notice board of size, 125 x 75 mm

90.14.28.9: S & F Motor starters of the following ratings Fully automatic star delta starter for 50HP motor

90.6.6.5: Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.10 sq mm

1.17.31: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

OD: Supply, installation testing and commissioning of 30 HP Vertical open well submersible motor pump set 2880 rpm at rated voltage 3 phase 350/415V 50HZ AC supply at 85-298 Mts head of model Deccan VOML 30DN 10 30 75mm (3") S.D VERTICAL OPEN-WELL SUBMERSIBLES ( 3 PHASE )/ CRI make or similler make delivery size 75mm mm head range 122-238M using leak proof materials as pipe connected one by one to the motor up to the bottom of the well using leak proof materials as pipe connected one by one to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including giving connection as per the direction at siteoth sides of the motor including giving connection as per the direction at site.

OD: Supply and fixing flat iron clamps made from 2 nos. 50x6 mm flat iron clamp of 50 mm with suitable size bolt and nut for fixing delivery pipe on the top of the well as required

OD: Supply and laying 10 mm or nearest size nylon rope

OD: Supply and providing 75 mm dia nearest size Full way valve (ISI)

OD: Supply and providing 75 mm dia nearest size Gun Metal Non return valve (ISI)

OD: Supply and providing 75 mm dia nearest size Flange set

OD: Supply & installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-6535)[650 x 350 x 250] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required.

OD: Supplying and fixing 100 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board

OD: Supplying and fixing 100A, HRC Fuse with HRC Fuse link with connections, in existing meter board

OD: Supply, threading ,laying and jointing of the 50 mm "B' class GI pipe with all required accessories in ground in he existing trench as protective covering to UG Cable

OD: Supply, threading ,laying and jointing of the 80 mm "B' class GI pipe with all required accessories in ground in he existing trench as protective covering to UG Cable

90.6.10.3: Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

OD: Charges for preperation of KSEB test Report for submitting to the concerned KSEB section office

Sameena

Bidder Name

MOIDEENKUTTY KOLAMBAN

Sameena