GENERALKarappuzha DamKRPMaintenance of Canal shutters of RBMCGeneral Mechanical Work

Amount

Clearing of grasses from canals and periphery etc.

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Dismantling and taking out the 21 no.s of canal shutters from the grooves ,and erecting the same after cleaning, seal changing, painting etc

OD25295/2022-2023:Dismantling and taking out Type 1 shutter(0.5m x 1.50 m) from the grooves and erecting the same after cleaning, seal changing and painting data for 1 shutter

OD25296/2022-2023:Dismantling and taking out Type 2 shutter(1.00 m x 1.50 m) from the grooves and erecting the same after cleaning, seal changing and painting data for 1 shutter

OD25297/2022-2023:Dismantling and taking out Type 3 shutter(2.20 m x 1.50 m) from the grooves and erecting the same after cleaning, seal changing and painting data for 1 shutter

Platform raising for shutters and extending thread length of the screw rod(dia 50mm) of type 3 shutter

OD33109/2022-2023:The dismantling and re-erection of existing hoist units for shutters (sizes: 0.5x1.5m, 1.0x1.5m, 1.5x1.5m) which includes the demolishing of brick work(In cement mortar) manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD25299/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD25300/2022-2023:Supply of M.S Bolt

OD25301/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

OD33100/2022-2023:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD25361/2022-2023:Dismantling of existing screw rod of dia 50mm from the shutter, thread cutting and refixing of the same.

Replacement of damaged base and nut, screw rods etc.

OD25302/2022-2023:Providing base and nut arrangement for hoisting the shutter including cost of all materials labour etc. complete

OD25303/2022-2023:Providing EN-8 screw rod 7.5 tonne capacity 4.00M lift screw hoist having one number of EN-8 Screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material,labour,hire charges and conveyance

OD25304/2022-2023:Supply of M.S Bolt

OD25305/2022-2023:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Painting of shutters and hoisting mechanisms

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Seal and seal clamp changing of type -1, type-2 and type-3 shutters

OD28802/2022-2023:Dismantling of existing rubber seals of canal shutter and stacking at convenient place as per the direction of departmental officers at site

OD25359/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD28801/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Overhauling of hoisting mechanisms

OD25362/2022-2023:Overhauling of hoisting mechanisms of Type-1 (0.5mx1.5 m) and Type-2 (1.00mx1.50 m ) shutters

OD25363/2022-2023:Overhauling of hoisting mechanisms of Type-3 (2.2mx1.5 m) shutters

Fabrication, painting and erection of 9 nos of trash racks for Aqua duct, cut and covers etc.

OD26016/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD26015/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD26017/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD26018/2022-2023:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD33110/2022-2023:Supply of M.S Bolt

JOBIN JOSEPH

P.Damodaran, G.R.Industries

Ashique Fabricators

Bidder Name

Ashique Fabricators

P.Damodaran, G.R.Industries

ASHIFUL HAK.C

JOBIN JOSEPH