REPAIR AND REPLACEMENT OF ROOF SHEET, TILES, FLASE CEILING AND RELATED B/R WORKS FOR OTM AND OP WKS AT ZONE 7, 8, 9 AND HOLESWAR AREA UNIT UNDER GE (N) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, Cleaning by chlorine etc ,tank capacity n. exc 500 ltr complete all as specified and directed.

Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats and shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4Sqm each complete all as specified and directed.

Taking down shutters exc 1.0 sqm but n. exc 2 Sqm each complete all as specified and directed.

M&L for half brick work with old size sub- class ‘B’ bricks of CD 75, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:4 including dismantling of existing surface complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, Cleaning by chlorine etc ,tank capacity n. exc 1000 ltr complete all as specified and directed.

Supply and fixed in position two layered ISI marked rotational moulded polyethylene water storage tanks of 500 litres capacity (cylindrical vertical with closed top) including cover, using new GI tank/PPR or other type of material tank nipples and unions for inlet and outlet pipe connection of same internal bore dia. and one for cleaning with dead plug , including dismantling and taking down of old unserviceable water storage tank complete all as specified and directed.

Supply and fixed in position two layered ISI marked rotational moulded polyethylene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) including cover, using new GI tank/PPR or other type of material tank nipples and unions for inlet and outlet pipe connection of same internal bore dia. and one for cleaning with dead plug , including dismantling and taking down of old unserviceable water storage tank complete all as specified and directed.

Providing and laying for cement concrete in coping, mud stops, hold fasts using type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) or of similar work, etc. including necessary form work complete in all respect as specifified and directed.

S&F coloured 0.50mm thick pre- painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer to truss, rafter, purlin etc. members of any type of material including dismatalling of existing sheets complete in all respect as specifified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in eves covering, ridges or of similar type, fixed with self tapping screws including necessary mild steel flats and screws for fixing with framed structure complete in all respect as specifified and directed.

S&F in repair mild steel sections (Beam, tee, angle, channel or flat sections) in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, independent fixing with welding etc. including distance pieces, cleats etc. using Fe 410-W (Gde E-250) quality A complete in all respect as specifified and directed.

Preparaing old decorated plastered or unplastered surface of wall and apply two coats of white wash including filling the voids/surface with wall care putty complete all as specified and directed.

Supply and fixed 2nd class hard wood plain fillets, with sectional area exc. 6Sqcm but not exc. 13Sqcm in square, rectangular or triangular in section, clean sawn, secured with nails or beads etc. complete all as specified and directed.

S&F for coloured glazed pre coated chequered cement concrete tiles of any shape and size, 20-25mm thick with grey cement with pigment,; set jointed and pointed in neat cement slurry with pigment in floors including over 15mm thick screed bed in CM 1:4 and dismantalling of existing tiling with screed bedding complete all as specified and directed.

Supply and fixed for glazed ceramic tiles 7 to 8 mm thick (square/rectangular) in vertical surface, area of each tile exceeding 0.06 sqm but not exc 0.16 sqm, set, jointed and pointed in neat cement slurry and pointed in white cement with pigment to match the tile colour over 15mm thick rendering in cement sand mortar 1:4 including dismantalling of existing tiles with screed bed/plastering complete all as specified and directed.

Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6 including dismantalling of existing tiles with screed bed/plastering, complete all as specified and directed.

Material and labour for 25mm cement concrete type B-0, 1:2:4 (using 12.5 mm crushed and graded stoone aggregate) in flooring and finishing the cement concrete surface even and smooth without using extra cement including dismanatlling of existing PCC floor complete all as specified and directed.

M&L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed

M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate) as in foundaion and mass filling complete all as specified and directed.

Supply and fixed in repair plain sheet glass 4 mm thick, ordinary quality and glazing with oil putty or Silicon/rectangular or of any shape not exc. 0.5 sqm in each pane etc. including hacking out old glasses complete all as specified and directed.

Supply and fixed in repair figured glass 4mm thick, pin head type and glazing with oil putty or Silicon/rectangular or of any shape not exc. 0.5 sqm in each pane etc. including hacking out old glasses complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on brick/stone or concrete surfaces of wall, finished even & smooth without using extra cement including taking down existing surface complete all as specified and directed.

S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed. Make:- Jaquar, Hindware Cat part No F-160002

S&F CP finish cast copper alloy, two way bib cock complete all as specified and directed.Make:- Jaquar cat part No SQT-512ANKN, Hindware Cat part No F-330004SCP

S&F in repair for 15 mm bore pipe brass chromium plated (CP) shower rose 125 mm size, fixed to iron pipe, complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar 1:6 on brick/stone or concrete surfaces of wall, finished even & smooth without using extra cement including taking down existing surface complete all as specified and directed.

Supply and fixed in repair 300 mm long, mild steel ordinary rat tail rod pattern springs, including roller and roller plate including necessary welding if required, complete all as specified and directed.

S&F in repair 20mm dia Stainless steel tube including bracket, stops, rollers etc. complete all as specified and directed.

S&F in repair Stainless steel towel rail 20 mm dia cast copper alloy, D type,60 cm long between flanges complete all as specified and directed.

S&F in repair Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair, 32 mm dia bore of pipe waste fittings, brass, chromimum plated for glazed ware sinks, wash hand basin, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement including 32 mm bore dia PVC waste pipe complete all as specified and directed.

Taking down existing damaged IWC alongwith complete PCC and cement concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stages:- (a) 15 mm thick plastering in CM (1:3) with WPC at all around wall and base of sunken floor with proper slope. (b) Applying a coat of 85/25 gde hot bitumen @ 1.2Kg/ Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 50 micron, natural colour with cold cut back adhessive. (c) Fixing of 25mm dia GI pipe (medium grade) spout of length 45 cm. (d) S&F in repair vitreous chinaware sqatting pan of size 580 x 440 mm, 'ORISSA PATTERN' with new PVC 'P' or 'S' trap and cement filling (1:5:10) and 25 mm thick PCC 1:2:4 at top surface bedded in cement concrete (excluding flushing cistern and flush pipe) with integral foot rests, complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity low level, white, including inlet ball valve, float valve and handle including bracketS&Flush pipe of polyethylene of high density complete all as specified and directed.

S&F for 55-60mm thick coloured, glazed pre coated interlocking or without interlocking paver block of any shape and size confirming to IS 15658/1237 with upto date amendments, M-35 Grade with grey cement with pigment laid over fine river bed sand complete all as specified and directed.(Note:- River bed sand shall be measured and paid separately). Sample as approved by GE.

S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with brass chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair toilet paper holder of cast copper alloy chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repair Plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair PVC (SWR) grating for 100 mm dia floor/nahani trap of size 150mmX150mm (with or without waste hole) including jointing with cement and necessary cutting for size complete all as specified and directed.

M&L for preparation of old decorated plastered surface of ceiling and applying two coats of oil bound distemper including filling of voids with wall care putty on plastered/unplastered surface including complete removal of existing treatment complete all as specified and directed.

S&F 25 mm thick Flush shutters, solid core construction, with block board core with decorative face veneers withlipping on both sides, complete all as specified and directed.

S&F in repairs 15 mm dia bore, Pillar taps of CP fancy type high pressure screwed for iron pipe complete in all respect as specifified and directed.

S&F in repairs 15 mm dia bore, Bib tap std of PTMT any colour screwed, for iron pipe and fixed at any location, position etc complete in all respect as specifified and directed.

S&F in repairs 15 mm dia bore, fancy type long body Bib tap brass chromium plated screwed down, screwed for iron pipe or for brass ferrule complete in all respect as specifified and directed.

S&F in repairs 15mm bore Angle valves CP fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete in all respect as specifified and directed.

S&F in repairs 15 mm bore dia Stop valves CP, fancy type, , with long shank and cup (concealed type) complete in all respect as specifified and directed.

S&F in repairs 15mm bore dia stop valve of PTMT any colour high pressure screwed for iron pipe & fixed (min wt 15mm - 90gms) complete in all respect as specifified and directed.

S&F in repairs 15 mm bore GI tubes medium grade, galvanished with all fittings fixed complete to walls and ceiling or laid in floors complete in all respect as specifified and directed.

S&F in repairs 20 mm bore GI tubes medium grade, galvanished with all fittings fixed complete to walls and ceiling or laid in floors complete in all respect as specifified and directed.

S&F in repairs 20 mm bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt 20 mm-210 gms) complete in all respect as specifified and directed.

S&F in repairs 15 mm bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (mini wt 15 mm-142 gms) complete in all respect as specifified and directed.

S&F in repairs 15mm dia PVC Connection with PTMT nuts of length 450 mm long complete in all respect as specifified and directed.

S&F in repairs 15mm dia PVC Connection with PTMT nuts of length 600 mm long complete in all respect as specifified and directed.

S&F in repairs 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolts, plate type, stove enamelled bolt not less than 12 mm dia with and including a minmum of 06 bolt plate and two on staple plate complete in all respect as specifified and directed.

S&F in repairs 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete in all respect as specifified and directed.

S&F in repairs 125mm long Aluminium anodised, handle cast type complete in all respect as specifified and directed.

S&F in repairs But Hinges 100 mm, medium weight, Stainless steel, and fixed (ISI) complete in all respect as specifified and directed.

S&F in repairs But Hinges 75 mm, medium weight, stailess steel, and fixed (ISI) complete in all respect as specifified and directed.

S&F in repairs GI Tee 15 mm bore medium grade complete in all respect as specifified and directed.

S&F in repairs GI Tee 20 mm bore, medium grade complete in all respect as specifified and directed.

S&F in repairs GI Elbow 15 mm bore, medium grade complete in all respect as specifified and directed.

S&F in repairs GI Elbow 20 mm bore, medium grade complete in all respect as specifified and directed.

S&F in repairs GI Union 15 mm bore, medium grade complete in all respect as specifified and directed.

S&F in repairs GI Union 20 mm bore, medium grade complete in all respect as specifified and directed.

S&F in repairs GI Nipple, 15 mm bore, 50 mm long , medium grade complete in all respect as specifified and directed.

S&F in repairs GI Nipple, 15 mm bore, 100 mm long , medium grade complete in all respect as specifified and directed.

S&F in repairs GI Nipple, 20 mm bore, 50 mm long , medium grade complete in all respect as specifified and directed.

S&F in repairs GI Nipple, 20 mm bore, 100 mm long , medium grade complete in all respect as specifified and directed.

S&F in repairs PVC Waste pipe 32 mm dia complete in all respect as specifified and directed.

S&F in repairs PVC Waste pipe 40 mm dia complete in all respect as specifified and directed.

S&F in repairs GI Elbow reducer 20mmX15mm bore complete in all respect as specifified and directed.

S&F in repairs GI Tee reducer 20mmX15mm bore complete in all respect as specifified and directed.

S&F in repairs GI socket reducer 20mmX15mm bore complete in all respect as specifified and directed.

S&F in repairs Continous (piano) hinges, mild steel , bright finish with width of flaps 30mm complete in all respect as specifified and directed.

S&F in repairs GI tank nipple of 15mm bore complete in all respect as specifified and directed.

S&F in repairs GI tank nipple of 20mm bore complete in all respect as specifified and directed.

Material and labour for preparation of newly undecorated plastered surface of wall and applying three coats of cement based paint over one coat of alkali resistant priming paint including filling of voids/surface with wall care putty on plastered surface complete all as specified and directed.

S&F of powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in ewach door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. or for window grill of appd size and shapeincluding fixing with aluminium "U" shape section for fixing etc. complete all as specified and directed.(Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner)

S&F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 1.5mm including necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller 2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete all as specified and directed.(Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner)

Material and labour for preparation of old undecorated plastered surface of wall and applying one coats of oil bound distemper and finished another one coat with spunge roller over one coat of alkali resistant priming paint and filling of cracks by wall care putty complete all as specified and directed.

Material and labour for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2mm thick (in two layers), wall care putty complete all as specified and directed.

S&F powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed.

S&F Itched toughened glass 12mm thick for partition and door fixed with stainless steel hinges/floor spring ,handle, lock and stainless steel fixing cleat complete all as specified and directed.

S&F 8 mm thick curved shaped urinal partition with frosted glass size 900 x 450 mm including stainless steel fixing brackets complete all as specified and directed.

S&F Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern complete all as specified and directed.

S&F in repair wall mixture 3 in 1 mixture System with Provision for both Hand Shower and Overhead Shower with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Wall Mount Installation Type) complete all as specified and directed. Make- Jaquar, Hindware, prayag

S&F in repair basin mixture Single Lever Tall Boy with Extension Body Fixed Spout, Brass Chrome Finish Hot & Cold Single Lever Basin Mixer with 450 mm Long Braided Hoses (Chrome) complete all as specified and directed. Make- Jaquar, Hindware, prayag

S&F in repair Single unit (single piece) wash down water closet pan white including plastic water closet seat cover white, Single unit with flat bottom, new CI/UPVC 'P' or 'S' type trap and mild steel chromium plated hinging device complete in all respect as specified and directed Make:- Hindware, Jaquar, Marc, Prayag.

S&F 12 mm thick plywood boards, grade BWP, type BB fixed with screws to timber frame work for wall Panelling framing complete in all respect as specified and directed

Providing and fixing false ceiling at all height including fixing of frame work made of special section power press from m.s Sheets and galvanized with zing coating of 120 gram g.m.s /sqm includind fixing Perimeter channels 0.5 mm thick 27mm height Heading flages of 20 mm and 30mm long, the Perimeter of ceiling fix to wall with the Help of rawl plugs including fixing of 12mm Gypsum board including jointing and Finishing to a flush finish. With putty , Primer and double coat ceiling paint finish complete all as specified and directed.

M&L for anodised aluminium grill for doors, windows, ventilators including joining cleat for fixing etc complete all as specified and directed.

Material and labour for complete removal of existing treatment on wall and applying two coats of oil bound distemper and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2mm thick wall care putty complete all as specified and directed.

Supply and Fix exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping , of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x38x0.70mm with 4mm dia GI wire as suspender and including 4mm thick decorative pre -painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/wooden truss of any type including dismantalling of existing false ceiling complete all as specified and directed.

Material and labour for preparation of walls and applying two coat of weather coat and filling of cracks by using wall care putty and a coat of primer including rubbing etc. and all necessary preperation complete all as specified and directed.

S&F in repair vitreous chinaware sqatting pan of size 580 x 440 mm, 'ORISSA PATTERN' with new PVC 'P' or 'S' trap bedded in cement concrete (excluding flushing cistern and flush pipe) with integral foot rests, complete all as specified and directed.

S&F 2nd class Hard wood scanttlings, wrought in any position for framed work jointing wirh nails, screws, nut bolt etc. including necessary supports to existing truss including Dismantling of timber scanttlings 40 Sqcm & over in section, in any position for framed workcomplete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 65 X 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face)& 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of enineer-in-Charge (M.S. hold fast/lugs or SS dash fastener shall be paid for seperately) Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 65 X 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face)& 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of enineer-in-Charge (M.S. hold fast/lugs or SS dash fastener shall be paid for seperately) Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for preparation of old decorated wooden surfaces with pre mixed wood filler used as putty of grith exc 10cm and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction, with block board core with decorative face veneers with lipping on both sides complete all as specified and directed.

Supplied and fixed 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for any colour of granite stone without white spots Granite stone slab 20 mm thick, as in floor, dado, steps, laid over and including screed bed 15 mm thick in cement mortar (CM) 1:6, jointed and pointed with white cement mixed with pigment to match the shade of stone including cuttingl rubbing and polishing surface, including cutting for wash hand basin, sink, gas pipe hole etc., to the entire satisfaction of the Engineer-in-Charge, complete all as specified and directed.

Supplied and fixed Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F wash hand basins, vitreous china of size 550 x400mm(flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and directed.

Supplied and fixed Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 35mm thick, second class HW, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S&F rolled section as in chowkhat/frame for door/vent/CB chowkhats and the like fixed with angle, hollow tubes etc., cleat and connecting plates complete (Butt hinges shall be measured and paid for separately) using Fe 410-W (Gde E-250) Quality A complete all as specified and directed.

S&F wire netting of Stainless steel wire 0.43mm dia of 1.18mm size of mesh fixed with tinned tacks of stainless steel wire stapl and fixed with tinned tacks, or galvanized staples in wooden/steel sections including necessary new second class hard wood wooden beadings of existing shape and size or welding/ new nut and bolt required complete all as specified and directed.

Providing and fixing in position cup board box type as per design and directed of 550-650mm deep, fixed over wall with PVC gittie and screws/or cup board in required sizes as per site made out of 18-19mm thick one side decorative lamination and other side balancing lamination sheet consisting of carcass 18-19mm thick plywood sheet. Provision of shelves, shutters, back side, top, bottom, side, made out of 18-19mm thick one side decorative laminated plywood sheet , all required brackets, screws etc,. The panel shall be fabricated using adhesives and screws whereever required. All the edges shall be covered with sunmica or 90 degree edge bent finish as per maufactures specifications and drawing including 15mmX20mm medium grade chrome finish two nos per leaf, slip on cabinet hinge/self-closing hinge, soft close hydraulic 4 hole cabinet auto cup hinge full overlay O crank with soft closing and 100mm SS handle size all items each per shutter including taking down of existing box complete all as specified and directed.

Providing and fixing in position cup board box type as per design and directed of 25-300mm deep, fixed over wall with PVC gittie and screws/or cup board in required sizes as per site made out of 18-19mm thick one side decorative lamination and other side balancing lamination sheet consisting of carcass 18-19mm thick plywood sheet. Provision of shelves, shutters, back side, top, bottom, side, made out of 18-19mm thick one side decorative laminated plywood sheet , all required brackets, screws etc,. The panel shall be fabricated using adhesives and screws whereever required. All the edges shall be covered with sunmica or 90 degree edge bent finish as per maufactures specifications and drawing including 15mmX20mm medium grade chrome finish two nos per leaf, slip on cabinet hinge/self-closing hinge, soft close hydraulic 4 hole cabinet auto cup hinge full overlay O crank with soft closing and 100mm SS handle size all items each per shutter including taking down of existing box complete all as specified and directed.

Material and labour for Cleaning and preparation of roof/wall (RCC/BRICK/tiles/Cement cuncrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface ceused by thermal expansion/ contraction and repairing the cracks on the surface caused by thermal machine, filled with Repair Mortar/General purpose Grout in the proportions as recommended by manufacturer, supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane including taking of existing roof treatment and apply with following specifications: (a) Elongation of range 400% 600% (b) Tensile strength of 8-12 N/mm2. (c) Crack bridging ability of 3.00-4.00mm (d) Hardness (Shore 'A' ASTM D2240) of range 50-70 The application shall include final base preparation, epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer Make- SIKA/FOSROC/Asian/Burger Paints/Berger. Note: The defect liability period of water proofing treatment shall be 10 years and the contractor shall beespor building(s) free From leakage/seepage for a period of completion. The contractor may obtain a similar guarantee by him for the purpose. 10 years after certified date of completion. the contractor may obtain a similar guarantee from the specialist firm engaged by him for purpose.

S&F in repair PVC cover for 500liter capacity water storage tanks of any description and any shape including PVC locking arragement complete all as specified and directed.

S&F in repair PVC cover for 1000liter capacity water storage tanks of any description and any shape including PVC locking arragement complete all as specified and directed.

Supply and fixed 100mm size of butt hinges mild steel complete all as specified and directed.

Supply and fixed 75mm size of butt hinges of stainless steel complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 125mm complete all as specified and directed.

S&F Aluminium handle cast type anodised 150 mm size complete all as specified and directed.

S&F Aluminium handle cast type anodised 125 mm size complete all as specified and directed.

S&F aluminium anodised sliding door bolts with hasp and staple (boilt type) 16mm dia of bolt and 300mm long complete all as specified and directed.

S&F PVC wall panelling cosisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing, complete all as specified and directed.

M&L brick work sub class B, class designation 75 old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 including dismantling of existing surface complete all as specified and directed.

S&F 3 mm thick aluminium composite exterior grade plane panel sheet of approved colour size, shape, description for base of sign board including necessary stainless steel nut bolts fixed on stainless steel section complete all as specified and directed. Make : 3M or equivalent.

Anil Kumar Sarmah (BID ID -3507601)

M/S Barua Enterprise (BID ID -3507908)