Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.7 LAccepted-AOC | L1 | Accepted-AOC Lowest |
Tender Value
₹24.5 L
EMD Value
₹49,000
Closing Date
5 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
PROVN OF CERTAIN MINOR WKS AND REVENUE WKS AND SPL REPAIR OF CERTAIN E/M INSTALLATIONS AT HAWS AND GULMARG UNDER GE 969 EWS
2023_MES_590949_4
CANO 969/WS- /2023-24
Open Tender
Civil Works
Item Rate
180 days
GULMARG
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 969 EWS
₹49,000
Yes
12 Dec 2023
11 Aug 2023
7 Sept 2023
11 Aug 2023
5 Sept 2023
18 Aug 2023
Amount
Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above Ground level) unreinforced complete all as specified and as directed.
M&L PCC 75mm thick 1:4:8 type D-2 (40mm graded) as in sub base complete all as specified and as directed.
M&L PCC 1:2:4 B-O (using 12.5mm graded agaregates) 25mm thick as in flooring finished rough for fIxing of tiles complete all as specified and as directed.
DIsmanting floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L machine cut Kota stone slab flooring 20-25mm thickas per sample kept in GE's office,laid over and incl 15mm thick cement screed base in CM (1:6) ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polishing to achive mirror finish complete all as specified and as directed.
M&L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM (1:6) complete all as specified and as directed.
M&L glazed coloured ceramic coloured tiles of size 350x 250x 7mm/450X 350X 7mm set and jointed in white or coloured cement to match on vertical surfaces such skirting,dados, rises to steps etc over 15mm thick rendering in cement mortar in (1:6) complete all as specified and as directed.
Demolition of brick work, PCC block masonary, stone masonary or boulder masonary built in cement mortar complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:4) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc
M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) finished with even and smooth w/o using extra cement complete all as specified and as directed.
Preparing of newly plastered surfaces of walls and applying two coat of white wash.
Supply only Liquid water proofing compound and make confirming to IS.
Dismantling of plain or corrugated steel sheeting ,any gauge, thickness, incIuding Nainital or similar pattern roof coverings in any position complete all as specified and as directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping Screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel steet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over section in fixed any position complete all as specified and as directed.
Dismantling fillets, rails,posts, rafters ,purlins, etc under 40 Sqcm in section complete all as specified and as directed.
M&L second class soft wood as in scantling clean sawn timber complete all as specified and as directed.
M&L 2nd class soft wood Plain fillets exc 13 Sq.cm.n exc 25 Sq.cm rectancular in section, clean sawn screwed with nails or brads complete all as specified and as directed.
S & F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on wall.
S&F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on ceiling.
Taking up or down GI tubing 15mm bore with all connection complete all as specified and as directed.
S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor.
M&L vitreous China squatting pan 'Orissa' pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe. etc. complete including making good to floor Add fixed in repairs.
S&F CP bib tap 15 mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule fixed in repair complete all as specified and as directed.
S&F 10 Ltr PVC valve less symphoníc action type flushing cistern low level white/ coloured with inlet ball valve float, handle, PVC pipe to WC and incl PVC connection 60Omm long complete fixed in repairs.
S&F vitreous china wash basin, white flat back of size 550x400mm fixed in repair including cutting for and pining in ends of brakets including 15mm dia piller tap cast copper alloy with capstan head cromium plated screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc.
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, for Fe 410-W (Gde-E-250) quality-A
S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. withing 20 mm of the length indicated) for Fe 410-W (Gde E-250) quality-A
Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment for Fe-410 W (Gde-E-250) quality-A
Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.
M&L Plain Cement concrete 1:2:4 type D-2 (40MM graded aggregate) as in foundation, filling, and mass concrete complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed 100mm bore, in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.
Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-30 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M-30\ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 3m depth complete all as specified and shown in drg No- CESZ\TD-1078/2011.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil. Note: After surface excavation the surface should be levelled by using earth rammers.
Returning filling incl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes , etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.
M&L hardcore of gauge 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface with broken stone or boulders complete all as specified and as directed.
M&L Hardcore of broken stone or boulder of gauge exceeding 63mm but n exc 100mm, deposited, spread, and levelled in layers n exc 15cm thick, watered and rammed to a true surface. Note: After laying of Hard core surface has to be levelled by using Machanical rammers.
M&L for cement concrete type D-2 1:4:8 (using 40mm graded aggregate) mass concrete in sub base of floor complete all as specified and as directed.
M&L 100 mm thick cement concrete 1:3:6, C-2 using 40mm graded aggregate in sub base floor complete all as specified and as directed.
M&L for PCC 1:3:6 Type C-2 (using 40mm graded Agg) as in foundations, filling and mass concrete complete all as specified and as directed.
M&L Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20 mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and as directed.
M&L for Edge stones to flooring with stone sets of size 250 to 300mm long x 150 to 200mm wide, and 450 mm deep and sides dressed; bedded in cement mortar 1:3, joints 20 mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and as directed.
Form work to edges of concrete flats, threds, brick in floors, opening in concrete walls, floor and roofs i.e exc 200mm wide and sides of RCC/PCC bend in walls, horizontal or sloping and similar work exc 10 cm but n. exc 20cm wide complete all as specified and as directed.
M&L 450mm bore reinforced concrete pipes, class NP-3 laid and joint with collars complete all as specified and as directed.
M&L 150mm bore reinforced concrete pipes, class NP-2 laid and joint with collars complete all as specified and as directed.
M&L for providing 75mm thick, Type B-1, 1:2:4 (Using 20mm graded aggregate) as in flooring and finishing cement concrete surface even and smooth without using extra cement etc complete all as specified and as directed.
M&L Forming Contraction (Dummy) joint 65mm deep x 10mm wide, filled with sealing compound 'A' Grade complete all as specified and as directed.
M&L for concrete drain bed to drain pipe of 150 mm including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2. using 40mm graded aggregate complete all as specified and as directed.
M&L for concrete drain bed to drain pipe of 450 mm including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2. using 40mm graded aggregate complete all as specified and as directed.
Forming 12 mm thick expension joint on 100 mm thick concrete slab filled with pre formed bituminous and top 30mm primed sealed with sealing compound grade A complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less then 0.9mm dia or securing with clips complete all as specified and as directed.
M&L Reinforcement cement concrete Type M-30 (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.
Removal of excavated material (soil) n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed.
S&F Deep freezer Hard top 300 Ltr capacity having Double door manual defrost top open for minimum puff thickness of 60mm temp range of -24 degree Centrigrade for freezer and 0 to 8 degre Celcius for cooler corrosion resistant body Eco friendly refrigerant complete all as specified and as directed.
S&F Voltage stabilizer for Copper wound automatic operation, Single Phase naturally air cooled indoor type & designed for input variation between 90V to 280V without put voltage stabilized at 230V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and as directed.
Note:- Schedule of credit Rs 23,190.00/- will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .