Dismantling of pole at 6.6KV O/H line under 220KV DVC HT line near crossing of 4 Lane Road at Sandi village and erection of extra pole for decreasing the span length to avoid sagging of conductor under Township, Rajrappa Area

Amount

Erection of metallic pole of length above 11 metre and upto 13 metre length in cement concrete 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required

Supplying and erection of stay set (galvanised) for 11KV overhead lines complete with 19/20 mm dia x1.8 metres long stay rod , anchor plate of size 45cm x 45cm x7.5 mm thimble, stay clamps, turn buckle (20mm x 60 cm), 7/4.00 mm dia G.I stay wire and11KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refillings etc as required

Supplying of channel iron 75mm x40mm x 6mm (7.14 kg per metre) cross arm for two 11KV over head line conductors complete with50mm X 50mm X 6mm (angle iron bracket welded to the channel iron and complete with 50mm X 6mm M.S. flat iron clamps, bolts, nuts including drilling of holes for insulator pin, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Erection of pole top/straight two wire/V shape two wire, angle iron/ channel iron, cross arm on Steel tubular/ rail/ PCC pole for 11/22/33 KV as required

Supplying and erection of 11KV pin insulators complete with large steel head G.I. pin, nuts, washers etc as required

Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc as required

Erection of GI wire 8 SWG including binding etc.

Erection of cradle guard required

Dismantling of overhead line comprising of copper/aluminium overhead line conductor, G.I. wire, cross arm, insulators etc. as required

Dismnatling of pole/street light standard /strut embeded in cement concrete foundation etc as required

Supply of angle iron 50 mm X 50 mm X 6 mm for cradle guard cross arms along with clamps, bolts, nuts including drilling holes etc. as required

Supply of flat iron size 50 mm x 6 mm for pole clamp along with bolts, nuts including drill holes etc.

Supply of G.I. wire size 8SWG for earth wire and craddle guard

Total impact of GST for the purpose of CTC

RK CONSTRUCTION CHITARPUR

[email protected]