Loading
Loading…
Loading…
Tender Value
₹8.1 Cr
EMD Value
₹16.2 L
Closing Date
22 May 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WEST
21 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure -VI B, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Format of Annexure VI B is attached with document tab for reference.
Date of inviting tender shall be the date of publishing tender notice on IREPS website if tender is published on website or the date of publication in newspaper in case tender is not published on website.
The balance sheet and all other financial documents attested/certified by CAs to substantiate fulfillment of financial eligibility criteria should be with UDIN (Unique Document Identification Number), failing which the 1.1.1 offer is likely to be rejected without any further reference. (Authority: Chief Engineer/Works/SER/GRC's letter no. CE/G/Arb&Cont. Mgt./Tender Circular/Pt.I/317, dated 11.03.2025)
(a)The tenderer must have successfully completed orsubstantially completed any one of the following categories of work(s)during last 07 years,ending last day of month previous to the one in which tender is invited:iThree similar works each costing not less than the amount equal to 30% of advertised value of the tender,oriiTwo similar works each costing not less than the amount equal to 40% of advertised value of the tender,oriiiOne similar work costing not less than the amount equal to 60% of advertised value of the tender.b(1)In case of tenders for composite works(e.g.works involving more than one distinct component,suchasCivil Engineering works,S&T works,Electrical works,OHE works etc.and in the case of major bridges- substructure,superstructure etc),tenderer must have successfully completed or substantially completed any one of the following categories of work(s)during last07(seven)years,ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender,or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender,or(iii)One similar work each costing not less than the amount equal to60% of advertised value of each component of tender.Note for b(1):Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2) In such cases,what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b)(3)To evaluate the technical eligibility of tenderer,onlycomponents of work as stipulated in tender documents for evaluation of technical eligibility,shall be considered.The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause7of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause7of the Standard General Conditions of Contract or jointly i.e,partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However,if required in tender documents by way of Special Conditions, a formal agreement duly notarised,legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s),and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility.Such subcontractor must fulfill technical eligibility criteria as follows:The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years,ending last day of month previous to the one in which tender is invited through a works contract.Note:for subletting of work costing up to Rs 50lakh,no previous work experience of subcontractor shall be asked for by the Railway.In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor,the same shall be done with subcontractor(s)fulfilling the requirements as per clause7oftheIRSGCC,with prior approval of Chief Engineer in writing.
Please Note that No Technical and Financial credentials are required for tenders having advertised value up to Rs 50 lakh. Hence tenderers need not required to submit any Technical and Financial credentials for tenders having advertised value up to Rs 50 lakh. (Authority- Railway Board's Letter No. 2022/CE-I/CT/GCC-2022/Policy, dtd: 27.04.2022)
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Explanation for Eligibility Criteria- 1. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. 2. In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials. 3. If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials 4. In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work. 5. If a 1.2.1 bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 10.1 Para 10 of the Tender Form (Second Sheet) of GCC APRIL 2022, the same shall be considered for the purpose of fulfillment of credentials. 6. In case a work is considered similar in nature for fulfillment of technical credentials, the overall cost including the PVC amount (if paid) of that completed work or substantially completed work, shall be considered and no separate evaluation for each component of that work shall be made to decide eligibility. 7. In case of newly formed partnership firm, the credentials of individual partners from previous propriety firm(s) or dissolved previous partnership firm(s) or split previous partnership firm(s), shall be considered only to the extent of their share in previous entity on the date of dissolution / split and their share in newly formed partnership firm. For example, a partner A had 30% share in previous entity and his share in present partnership firm is 20%. In the present tender under consideration, the credentials of partner A will be considered to the extent of 0.3*0.2*value of the work done in the previous entity. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc.
8. In case of existing partnership firm, if any one or more partners quit the partnership firm, the credentials of remaining partnership firm shall be re-worked out i.e., the quitting partner(s) shall take away his credentials to the extent of his share on the date of quitting the partnership firm(e.g. in a partnership firm of partners A, B & C having share 30%, 30% & 40% respectively and credentials of Rs 10 crore; in case partner C quits the firm, the credentials of this partnership firm shall remain as Rs 6 crore). For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc.9. In case of existing partnership firm if any new partner(s) joins the firm without any modification in the name and PAN/TAN no. of the firm, the credentials of partnership firm shall get enhanced to the extent of credentials of newly added partner(s) on the same principles as mentioned in item 6 above. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deeds, dissolution/splitting deeds and proof of surrender of PAN No.(s) in case of dissolution of partnership firm etc. 10. Any partner in a partnership firm cannot use or claim his credentials in any other firm without leaving the 1.2.2 partnership firm i.e., In a partnership firm of A&B partners, A or B partner cannot use credentials of partnership firm of A&B partners in any other partnership firm or propriety firm without leaving partnership firm of A&B partners. 11. In case a partner in a partnership firm is replaced due to succession as per succession law, the proportion of credentials of the previous partner will be passed on to the successor.12. If the percentage share among partners of a partnership firm is changed, but the partners remain the same, the credentials of the firm before such modification in the share will continue to be considered for the firm as it is without any change in their value. Further, in case a partner of partnership firm retires without taking away any credentials from the firm, the credentials of partnership firm shall remain the same as it is without any change in their value. 13. In a partnership firm "AB" of A&B partners, in case A also works as propriety firm "P" or partner in some other partnership firm "AX", credentials of A in propriety firm "P" or in other partnership firm "AX" earned after the date of becoming a partner of the firm AB shall not be added in partnership firm AB.14. In case a tenderer is LLP, the credentials of tenderer shall be worked out on above lines similar to a partnership firm. 15. In case company A is merged with company B, then company B would get the credentials of company A also.
Date of inviting tender shall be the date of publishing tender notice on IREPS website if tender is published on website or the date of publication in newspaper in case tender is not published on website.
Defination of Similar Work :- EXECUTION OF P.WAY WORKS ON RUNNING LINES
74 conditions · 6 needing a document upload
If a tender is accepted on the quoted rates of bidder which is below the advertised tender value, an additional performance security shall be submitted by the bidder as below: (i) If Bid quoted in % of advertised cost is below 0 - 5% (Inclusive), then an additional performance guarantee (in %) will be Nil. (ii) If Bid quoted in % of advertised cost is below 5%, then an additional performance guarantee (in %) will be 5%. (Authoirity : Advance Correction Slip No. 11 to IRSGCC April-2022)
Following is the checklist for submission of documents while submitting the tender. :-
(I) A certificate as per annexure - V(A) where ever applicable enclosed in document tab. (II) Fulfillment of Standard Technical and Financial Criteria as per tender documents wherever applicable as per Tender Documents.
For Sole Proprietorship Firm: All documents in terms of Para 10 2.1.1 of the Tender Form (Second Sheet) of IR Standard GCC April 2022.
For Partnership Firm
The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm.The following documents shall be submitted by the partnership firm, with the tender:(i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar.(ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii) An undertaking by all partners of the partnership firm that they are not blacklisted ordebarred by Railways or any 2.2.1 other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of IR Standard GCC April 2022
For Company registered under Companies Act-2013
Following documents shall be submitted by the tenderer:Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney 2.3.1 issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) of IR Standard GCC April 2022.
Joint Venture (JV): The tenderer shall submit documents as mentioned in Clause 17 of IR Standard GCC April 2022 (Wherever Applicable)
Following documents shall be submitted by the tendererRegistered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of IR Standard GCC April 2022.
Following documents shall be submitted by the tenderer: LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from 2.5.1 participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)of IR Standard GCC April 2022.
Following documents shall be submitted by the tenderer: HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the 2.5.2 position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of IR Standard GCC April 2022.
Declaration regarding Retd Railway Employee as per Para 16 (a), (b) & (c) of IR Standard GCC April 2022.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall 2.6.1 enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure VIA and shall be valid for a period of 90days beyond the bid validity period.NOTE- Bank Guarantee for Bid Security shall be Acting Through DRM/ENGG/CKP and Beneficiary shall be FA & CAO/S.E.Rly/Garden Reach/ Kolkata.
Bid Capacity: Bid Capacity detailed as per Annexure-VI wherever applicable as per tender documents
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Contractor will fill up and update the details of Contracts, Contractual Labour employed by him/her and related details as required by Railway on "Contract Labour Management Portal" or any other portal or in Register - as Directed by Engineer-in- Charge for which no extra payments shall be made.
Letter of Credit as Mode of Payment in Works Tender or Service Tender has been introduced as per Rly Board's letter no. 2018/CE-I/CT/9, New Delhi, dtd: 04.06.2018 (Documents are attached in uploaded section named as Conditions for LC Credit)). Tenderers are advised to see the uploaded section carefully for availing LC Credit at the time of bidding in IREPS Portal.
Retd. employ :- declaration regarding employment/ partnership etc. of retired railway employees. as per Clause 16 of IRSGCC APRIL 2022. Format is attached in document tab.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure VI A and shall be valid for a period of 90 days beyond the bid validity period. The tenderer are advised to upload the Bid Security in case of BG as per Annex VI A for BID SECURITY uploaded in document Tab. Also,the original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of bids). Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal(IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. NOTE- Bank Guarantee for Bid Security shall be Acting Through DRM/ENGG/CKP and Beneficiary shall be FA & CAO/S.E.Rly/Garden Reach/Kolkata.
Mandate form should be uploaded as per attached format in document tab.
Through Ballast Renewal along with deep screening under the jurisdiction of Sr. DEN(West)/CKP.
CKP-WEST-26-27-03
CKP-WEST-26-27-03
Open
Works - General
12 Months
West Singhbhum, Jharkhand
₹0
₹16.2 L
22 May 2026
29 Apr 2026
8 May 2026
59 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Using Soil Class SQ3 | cum | 5000.00 | 278.97 | 13,94,850 |
| 2 | In all conditions and classifications of except rock | soil cum | 10500.00 | 106.59 | 11,19,195 |
| 3 | Locations other than Ballasted Deck Bridge | Each | 1364.00 | 473.84 | 6,46,317.76 |
| 4 | Ballasted Deck Bridge | Each | 310.00 | 559.63 | 1,73,485.3 |
| 5 | Depth of 250 mm below bottom of sleeper For Plain Track : | - TRM | 5911.00 | 516.55 | 30,53,327.05 |
| 6 | Depth of 300 mm below bottom of sleeper For Plain Track : | - TRM | 24330.00 | 582.05 | 1,41,61,276.5 |
| 7 | Depth of 250 mm below bottom of sleeper Turnouts | for TRM | 633.00 | 826.48 | 5,23,161.84 |
| 8 | Depth of 300 mm below bottom of sleeper Turnouts | for TRM | 3587.00 | 931.29 | 33,40,537.23 |
| 9 | For 1 in 12 points and Crossings | Set | 10.00 | 49,334.05 | 4,93,340.5 |
| 10 | For 1 in 8.5 Points & Crossings | Set | 3.00 | 39,467.24 | 1,18,401.72 |
| 11 | Boxing and profiling of ballast as procedure prescribed in latest edition IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting same in crib and shoulder by leading to maximum of 50m including crossing of track, deweeding on ballast section etc and directed by Engineer-In charge. | per TRM of the a as | 56275.00 | 26.33 | 14,81,720.75 |
| 12 | Under Traffic Block Conditions: | cum | 78786.00 | 52.67 | 41,49,658.62 |
| 13 | 25mm gap 'in-situ' welding during traffic block using Railway's welding portion Welder and finishing of weld to meet prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. complete the work in all respect as per "Manual for Fusion Welding of Rails Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint original position and fixing of joggled plate at new weld, to be removed after passing of weld in USFD test as directed Engineer in charge. Note: 1. Only welding portion and related accessories as Annexure - I and Welder shall be supplied Railways. 2. Hydraulic Weld trimmer shall used for chipping and profile Grinder finishing. 3. Required nos. of Joggled plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. | Each & the to IR's by to fish by per by be for fish | 224.00 | 1,599.21 | 3,58,223.04 |
| 14 | For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Thimble, 3 pieces Mould (Zircon washed) and Compressed Petrol/LPG pre heating technique | Each Air | 224.00 | 1,088.69 | 2,43,866.56 |
| 15 | Cess repair/widening work as per RDSO Specifications and guidelines RDSO/2020/GE: IRS-0004 or latest in running line with suitable soil to the designed profile The work shall include uprooting and disposing of the vegetation, benching at every 30 vertical height, earthwork in benching portion and compaction using suitable slope vibratory Rollers/Compactors etc. to achieve prescribed MDD. Note: 1. Payment of cess repairs shall be based on the quantities worked out from the cross sectional calculations only worked out from the initial ground levels before doing benching and final levels done for new embankment. The earth work benching portion shall not be paid extra the same has been included in the rate. The earth work shall be started only after Completing of the benching and certified. The benching Work shall be done for maximum height of 1.50 m at any time based on the progress of earthwork starting from toe of the embankment. | cum all Cm and as in as 2. 3. a | 8000.00 | 303.63 | 24,29,040 |
| 16 | For PSC Sleeper Track with Sleeper Density 1660 | of TRM | 68922.00 | 137.85 | 95,00,897.7 |
| 17 | For PSC Sleeper Track with Sleeper Density 1660 | of TRM | 34661.00 | 106.04 | 36,75,452.44 |
| 18 | 1 in 8½ PSC layout | Set | 98.00 | 11,468.01 | 11,23,864.98 |
| 19 | 1 in 12 PSC layout | Set | 68.00 | 14,919.82 | 10,14,547.76 |
| 20 | 1 in 8½ Derailing Switch | Set | 4.00 | 1,634.45 | 6,537.8 |
| 21 | Without Rail tensor | TRM | 56275.00 | 34.46 | 19,39,236.5 |
| 22 | Carrying out preparatory works for operation of Ballast Cleaning Machine (BCM) which includes making trench in track for inserting cutter bar, supporting track on wooden block supplied by Railway, removal of ballast along with muck from shoulder which is out of reach of cutter chain and putting the same cutting width or between rails. Rate includes all miscellaneous works, e.g. opening and fixing of joggled fish plates, OHE Bonds, dismantling & removing obstructions etc. | TRM in re- | 42914.00 | 16.24 | 6,96,923.36 |
| 23 | Carrying out various works during operation of BCM, like filling up of ballast at deficient location from locations where ballast excess or from adjoining tracks, required initial packing, adjustment of PSC Sleepers, provision wooden blocks supplied department and attending track parameters etc. complete so as to make track fit for kmph speed. | TRM is by 20 | 42914.00 | 39.25 | 16,84,374.5 |
| 24 | Removal of screened muck discharged BCM, where muck disposal on side slope restricted due to platform, cutting, OHE mast etc. and disposing it beyond 5m from edge cutting up to 3m deep or alternatively carting it up to 50m for disposing off beyond the of cutting / platform and making up cess wherever low. | by TRM is of end | 42914.00 | 29.8 | 12,78,837.2 |
| 25 | Extra to item nos. from 154030 and 154040 for disposal of muck at a distance beyond 50m for every additional lead of 50 metres part thereof up to 500 metres. | TRM or | 5207.00 | 2.77 | 14,423.39 |
| 26 | Extra to item nos. from 154030 and 154040 for disposal of muck for additional lift of metre or part thereof beyond 3 metre lift case of disposal of muck from track in cutting. | TRM 1 in | 2603.00 | 5.76 | 14,993.28 |
| 27 | Removing the ballast from shoulders, left over after BCM working, screening the same removing the muck and putting back screened ballast into track, boxing the ballast to profile and using released muck for cess making or throwing away within 50m lead and 3m lift when not required for cess repairs and as directed by the Engineer-in-charge. Note: This item shall be used only when BRM is not available. | TRM the | 42914.00 | 20.64 | 8,85,744.96 |
| 28 | Ballast equalisation & ballast profiling after completion of deep screening work by BCM and/or after unloading of ballast by DMT (Ballast Train), as directed by Site Engineer per IRPWM including heaping of ballast tamping zone keeping rails & sleeper top free from ballast, spacing and squaring of sleeper, gauging, cleaning of muck, proper fixing fastening, attention during each round sleeper tamping in relation to pre & post working Note: Payment shall be made only once in irrespective of numbers of TTRM packing round and after restoration of normal speed and restoration of complete ballast profile and cess profile. | TRM as in of of | 72955.00 | 37.02 | 27,00,794.1 |
| 29 | Making cess in deep screened track by using screened muck discharged by BCM where cess is low or cutting cess to required depth up to 4m from centre of track, where cess high and disposing off extra muck beyond from edge of cutting which are up to 3m deep or alternatively carting it up to 50m disposing it off beyond cutting or platforms, so as to make cess as per standard profile including providing proper slope. | TRM is 5m for | 26034.00 | 33.1 | 8,61,725.4 |
| 30 | Carrying out Through packing of sleepers make track fit for 30 KM speed as procedure stipulated in latest version IRPWM, behind BCM including filling ballast when only lifting is carried out by BCM. | to TRM per of | 5207.00 | 85.14 | 4,43,323.98 |
| 31 | Pre, during, and post BCM works for deep screening of ballast in Points and crossings with all contractor's labour, tools and plants as required to carry out the work to standards in specific time including crossing of tracks etc. complete and as directed by Engineer - in - charge. I. Pre-BCM Operation a) making trenches for insertion of cutter bars at various locations as per the directions engineer in charge. i.e.., one trench ahead one rail length from SRJ and second trench near sleeper No 62 ( 1in 12) etc., b) Filling ballast up to sleeper level. c) Tightening fittings/ plate screws, ERCs, Stud bolts, check rail bolts. II. During BCM Operation : Assistance to S&T Department : Opening cables at approach of Points & Crossings, TLD Boxes/ removing of Point motor and refixing the same and covering cables after passing BCM in block period with S&T Staff. Engineering : c) Removing of two long sleepers i.e.., sleeper No 3 & 4 and refixing the same in position during block after passage of BCM. d) Removing obstruction i.e.., S&T CC block duly digging with crow bars and breaking with chisel/ hammer, cutting of rail pegs with gas. e) To remove, excess ballast on rail table for free movement of BCM and for packing purpose. f) Extension of cutter bar wherever required in assisting machine staff. g) Removing of cutter bar/ Chain links from the trenches after screening work by BCM. III . Post BCM Operation : Packing switch portion including Motor long sleeper i.e.., SRJ to heel joint to reset Point train movement & initial packing of lead portion to allow train at 20KMPH and lifting the track in two stages (50mm to 75mm each lift) wherever required for correcting longitudinal surfacing b) Dumping of ballast the deficient portion in crib, on main turnout side for initial packing purpose. Boxing / Levelling of muck duly ensuring levelling of muck on cess side and lowering cess to the deep screened depth removing of muck in between the lines leading up to 250mts. Note: 1. For technical reasons, some of the points and crossings cannot be deep screened either fully partially by BCM, in which case, the left over length will be deep screening manually. The length of points and crossings assembly for payment of this item should be taken from SRJ to longest concrete sleeper available beyond heel of crossing along main line. | TRM the the : of of up of a) of of b) a) for in the in line c) of and and or 2. just | 15280.00 | 419.46 | 64,09,348.8 |
| 32 | For day time block working | TRM | 26521.00 | 19.07 | 5,05,755.47 |
| 33 | For night time block working | TRM | 16393.00 | 21.36 | 3,50,154.48 |
| 34 | 1 in 8½ Turnouts (Under Traffic Block Conditions) | Set | 153.00 | 9,359.98 | 14,32,076.94 |
| 35 | 1 in 12 Turnouts (Under Traffic Block Conditions) | Set | 135.00 | 10,890.55 | 14,70,224.25 |
| 36 | Derailing Switch (Under Traffic Block Conditions) | Set | 5.00 | 3,446.18 | 17,230.9 |
| 37 | BCM/FRM/UNIMAT (7.5 KVA generator and 12x500 W) | Night | 119.00 | 3,924.04 | 4,66,960.76 |
| 38 | CSM / DUO / 3X with or without DGS (7.5 KVA generator and 8x500 W) | Night | 29.00 | 3,715.32 | 1,07,744.28 |
| 39 | 60 Kg - 110/90 UTS - Outside Track | Each | 224.00 | 162.22 | 36,337.28 |
| 40 | 60 Kg - 110/90 UTS - On Running Line | Each | 224.00 | 210.39 | 47,127.36 |
| 41 | Outside Track | Each | 1345.00 | 53.88 | 72,468.6 |
| 42 | On Running Line | Each | 1345.00 | 70.49 | 94,809.05 |
| 43 | For lead up to 500 metres | MT | 190.00 | 300 | 57,000 |
| 44 | For lead beyond 500 metre and up to 1 Km | MT | 190.00 | 444.11 | 84,380.9 |
| 45 | Lead beyond 30 Km and up to 50 km | MT | 70.00 | 439.46 | 30,762.2 |
| 46 | Lead beyond 50 Km and up to 100 Km | MT | 130.00 | 656.22 | 85,308.6 |
| 47 | Lead beyond 100 Km and up to 150 Km | MT | 380.00 | 980.11 | 3,72,441.8 |
| 48 | Extra for every Km per MT beyond 150 over item no. 172047 | Km MT-Km | 114000.00 | 3.3 | 3,76,200 |
| 49 | Level crossings with asphalted road surface | Sqm | 400.00 | 575.29 | 2,30,116 |
| 50 | Level crossings with concrete blocks road surface | Sqm | 400.00 | 523.28 | 2,09,312 |
| 51 | Caution Indicator Board of 1400mmx400mm with back support frame fixed to vertical post of MS angle of 50mmx50mmx6mm of 3650 mm long | size Each size | 70.00 | 6,298.57 | 4,40,899.9 |
| 52 | Speed Indicator Board of equilateral triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm 3650 mm long | Each of | 70.00 | 5,420.97 | 3,79,467.9 |
| 53 | Stop Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm 3650 mm long | Each of | 70.00 | 6,298.57 | 4,40,899.9 |
| 54 | Termination Indicator Board of Circular shape having diameter of 1000mm with back support frame welded to vertical post of angle of size 50mmx50mmx6mm of 3950 mm long | Each MS | 70.00 | 7,699.44 | 5,38,960.8 |
| 55 | Manufacturing, supplying and fixing Curve Indicator / Point Indicator / SEJ Boards to provided at various locations on formation, made out of MS sheet 2mm thick of 450mm x 300mm duly fixed with MS frame 25mm x 25mm x 3mm angle welded 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification including painting of details with enamel paint, as directed by Engineer in-charge (Earthwork & concreting will be paid separately) | Each be size of to and | 70.00 | 1,061.27 | 74,288.9 |
| 56 | Providing and erecting water proof Gypsy Tent of size 3m x 3m for a specific period time and removal of the same after completion of work or as directed by Engineer in-charge. | Day of | 730.00 | 529.15 | 3,86,279.5 |
| 57 | Office Table of size 1.2m x 0.9m per day | Each | 730.00 | 42.55 | 31,061.5 |
| 58 | Office Chairs with cushioned seat, back arms per day | and Each | 1460.00 | 32.31 | 47,172.6 |
| 59 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 150.00 | 808.46 | 1,21,269 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ConditionsforLCCredit.pdf
ATTACHMENT
VendorMandateForm.pdf
ATTACHMENT
DeclarationofRetiredEmployeecertificateE.pdf
ATTACHMENT
ANNEXUREVIBforFINANCIALCRITERIA.pdf
ATTACHMENT
ANNEXUREVIAforBIDSECURITY.pdf
ATTACHMENT
Tele_Cir_9-20231.pdf
ATTACHMENT
SPLConditionofcontractforallcontract.pdf
ATTACHMENT
TRACKWORKCONDITIONS.pdf
ATTACHMENT
GCC-2022-ACS10_merged.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
Location.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .