A/R and M/O General Pool Accommodation

Amount

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres (Fifty metres) lead Thickness above 25 mm (Twenty five millimetre) up to 40 mm (Forty millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm (One milimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre (Fifty grams/litre), of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work with in all leads and lift of materials and as per direction of Engineer-in-charge. A walls

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (Three hundred x Three hundred millimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (Twenty millimetre) thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram/ square metre) including pointing the joints with white cement and matching pigments etc., complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram/ square metre) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm (Six hundred x Six hundred millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety litre/ Ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (Zero point seventy five litre/ Ten square metre) of approved brand and manufacture with in all leads and lift of materials and as per direction of Engineer-in-charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (Zero point ninety litre/ Ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (Zero point eighty litre/ Ten square metre) of approved brand and manufacture with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing high pressure PVC spigot and socket,waste and ventilating pipes ISI marked including fixing with approved adehesive etc. complete 110 mm (One hundred ten millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m (One point zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre (Ten litre) low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm (Fifteen millimetre) dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm (Five hundred fifty x Four hundred millimetre) with a 15 mm (Fifteen millimetre) CP Brass single hole basin mixer with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P Brass waste for wash basin or sink (32 mm (Thirty two millimetre) dia) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm (One hundred thirty eight millimetre), breadth 102mm (One hundred two millimetre), height of 75mm (Seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms (One hundred six grams) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing brass bib cock of approved quality :) 15mm (Fifteen millimetre) diabore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm (Forty five centimetre) length 15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 100 mm (One hundred millimetre) dia chromium plated grating of superior quality for floor, gully or nahani trap with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :.300x16mm (Three hundred x Sixteen millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing oxidised M.S. tower bolts (barrel type) with necessary screws etc. complete.150x10mm (One hundred fifty millimeter x Ten millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

NEERAJ SHARMA