bathauee akka

Excavation in foundation in ordinary soil, loam, clay or sand including lift upto 1.5m & lead upto 30m including filling watering & ramming of excavated earth into the trenches or into the space between the building & inside the foundation trenches or into the plinth, removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches. (Excluding Royalty ) as per SINo. 251

Concrete with 4cm gauge brick ballast, fine sand of 1.25 fineness modulous and cement in proportion of 12:6:1 in foundation and under floor including supply of all material , labour, and T&P etc. required for proper completion of work. as per SINo. 273

First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of work.as per SINo. 305

Cement concrete with 20mm gauge approved stone grit, approved coarse sand and cement in proportion of 4:2:1 including supply of all material, labour, and T&P with mixure machine and vibrator etc. required for proper completion of work. as per SINo. 279 (i)

Providing and laying of factory made 80 mm thick Interlocking cement concrete tiles (30 mpa) including 25mm thick compacted bed of fine sand compacting and proper embedding/ laying of interlocking tiles leveling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T&P etc. required for proper completion of work as directed by engineer-in charge.as per NEW ITEM NO.1

12mm thick plaster with cement mortar consisting of one part of cement and 4 parts of coarse sand of 2.25 fineness modulous on brick work including supply of all material, labour, T&P etc. required for proper completion of work.as per SINo. 584 i

R.C.C. work with cement approved coarse sand and 2cm (3/4") guage approved stone grit in the proportion of 1:2:4 in lintel of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. required for proper completion of the work. as per SI No.283

M.S. work in plain work such as RCC work including cutting and bending of bars in required shape and size as per SI No.504

Supply & Fixing of sign board of size 1.20X0.90 Mtr. With M.S. Sheet of 18 BG made of angle iron post 2 Nos. of 1.20 Mtr. In horizontal and 3.05 mts. In vertical of size 40X40X5 mm & flat Iron for cross 02 No. 40X5 mm with complete letter writing as per drawing (Rate sanctioned by SE RED Bly.)