PROVISION OF PRE REQUISITE ALLIED SERVICES B/R AND E/M FOR INSTALLATION OF STATIC OXYGEN GENERATION PLANT 200 LPM AND PROVN OF MEDICAL GAS AND VACUUM PIPELINE SYSTEM WITH ALLIED SERVICES FOR VARIOUS WARDS OF 180 MILITARY HOSPITAL AT MISSAMARI

Amount

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in any type of soil and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specifed and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as speicified.

M & L for PCC 1:4:8 type C-2 using 40mm graded aggregate as in Foundation filling and mass concrete complete all as specified and directed.

Hardcore of gauge exc. 63mm but n. exc. 100mm deposited spread and levelled in layers n. exc. 15cm thick, watered and rolled and rammed to a true surface with broken stone or boulders as in hardstanding complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick, PCC 1:4:8, type D -2 (using 40 mm graded crushed stone aggregate), as in sub base of floor’s complete all as specified and directed.

M & L for PCC 1:2:4 type B-1, 100mm thick using 20mm graded aggregate as in hardstanding, complete all as specified and directed.

M&L for chequerred Cement concrete tiles 25cm x 25cm x 20-22mm thick laid over including 15mm thick screed bed 1:4 complete all as specified.

M&L Cement Concrete 1:3:6 (20mm graded aggregate), 75mm thick as in Plinth Protection/ Foot Path/hardstanding etc, finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

S&F for steel work in tubular trusses conforming to IS 1161-1998 grade St-240 and fixed with nuts & bolts etc complete all as specifed and directed.

M&L Brick Work with Sub-Class ‘B’ Bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete

M&L rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:4 finishing surface fair and even all as specified.

M&L preparation of wall newly plastered or un-plastered surfaces and applying two coats of cement based paint over a coat of cement primer

M&L for MS plate plain or chequerred including cuttings to shape, welding as directed and fixing with scres, bolts etc conforming to Fe-290. Gde E-165 complete all as specified

Supply only chain link MS Zink coating fencing 75x75mm mesh 4mm dia or wire complete all as specified.

Fixing only chain link fencing (Chain link wire mesh to be collected from MES store yard) fixing with and including line wire, any mesh, size and any type of standards rails straining bolt etc including provision of binding wire complete.

M&L TMT Bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual type complete all as specified

M&L for prepation of new steel sufaces exc 10 Cm width or girth and appling two coats of synthtic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 100 mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-7 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge. Note 1- Excavation,DI Specials shall be measured and paid separately. Note- Rate of rubber gasket joint shall be included in quoted rate. Make:- Electrosteel and equivalent in Jindal and Tata.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 63 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed. Make:- SFMC, Fusion,or equivalent in Vectus, Reliance,Wetflow, Supreme.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed. Make:- SFMC, Fusion,or equivalent in Vectus, Reliance,Wetflow, Supreme

Cutting of existing CI/DI pipe laid 150 mm dia for inserting DI Tees for new connection of 150 mm x 100 mm dia all as specified and directed by Engr-in - charge.Note :- DI Tee / bends will be measured and paid Separately under respective items.

M&L Cast Iron Sluice Valve 100 mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve,complete all as specified and as directed by Engr-in charge.Make:- Leader/ Kirloskar/upadhya

S&F PP-R Gate Valves (Brass Insert) 63mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed.

S&F PP-R Gate Valves (Brass Insert) 32 mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed.

DI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for Pipe upto 300mm bore complete all as specified and as directed by Engr-in charge.

M&L Construction Brick Masonry Valve Pit of size 900x900x900 mm (Internal Dimension) one Brick thick Wall in Cement Mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggre-gate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame alround including provision of Hinges, Handle with Locking Arrangement and 40x40 x6mm Angle Iron Frame fixed on top of Valve Pit by means of holdfast 150mm long, embedd -ed in PCC 1:2:4 (20mm graded aggregate) Block of size 230x200x100 mm, applying two coats of Anti-corrosive Paint to all exposed Steel Surfaces over a coat of red oxide zinc chrome Primer after preparation of Surfaces and necessary Earth Work in Soft/ Loose Soil , complete all as specified and as directed by Engr-in charge..

Supply & Laying LT UG Cable of size 120 Sqmm 3.5 Core laid in trences /floor/on wall/service connection XLPE Insulated, sheathed, heavy duty and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make : polycab, KEI, havells and gloster

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

M & L sand cushioning in trenches for cable protection 23cm thick with coarse sand laid dry in trenches with uniform thickness including consolidation 8cm thick before laying of cable & 15cm thick after laying of cable & punning etc. complete all as directed. (Note : Only punned thickness of 18cm shall be measured & paid)

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.

S & F GI Tubing light grade of size 80 mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.

Outdoor type LT Panel of suitable size CPRI approved factory made OPENABLE from both side panel board complete with PCC foundation, internal wiring the following items housed in :- (a) 400 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code (b) Incommer MCCB 4 Pole 125 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts,including spreader terminal, make: L&T Cat part No. CM92108OOL1OG-01 No and equivalent make in Legrand/ Indo Asian/ Havells. (c) Outgoing MCCB 4 Pole 100 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts,including spreader terminal, make: L&T Cat part No. CM92108OOL1OG-02 No and equivalent make in Legrand/ Indo Asian/ Havells. (d) Outgoing MCCB 4 Pole 63 Amps, thermal magnetic type DZ1-160D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal, make: L&T Cat part No. DZ1F0063DXD1A, 01 No and equivalent make in Legrand/ Indo Asian/ Havells. (e) Digital frequency meter 40-60 Hz - 01 No.Model:- WL113040OOOO,01 No and equivalent make in Legrand/ Indo Asian/ Havells. (NOTE: For Note description refer APPENDIX "A" Srl. Page No.__)

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised Iron strip of size 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised steel and GI Protection pipe light grade 40 mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip.

Supplying, installing, commissioning and testing complete of manufacturer as approved by the GE, manufactured and tested static Silent Diesel Engine Driven Generating set capable of delivering 40 KVA, 415 Volts (AC 3 Phase, 4 wire system of supply) 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled through flexible coupling to a matching alternatore and mounted on dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure (the complete set conforming to and test certified as per CPCB norms and as specified) all as specified complete with control panel standardised by manufacturer, flexible exhaust pipe complete and shall comprise of the followings :- (NOTE: For Note description refer APPENDIX "A" Srl. Page No.__)

M&L Earthing complete with Copper earth plate electrode 60cm x 60cm x 3.15 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to Copper earth strip 20 x 3.15 mm thick drawn surrounded from all sides by mixture of charcoal and common salt alternately through and including GI protection pipe of light grade 40 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1 : 3 : 6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part-I. Note : Testing to be carried out after completion, if the earth resistance below 5 ohm is not obtained, earthing shall be renuated at no extra cost till the desired earth resistance is obtained.

S&F Copper strip 20 x 3.15mm with saddles and fixing screws and run through wall provided with nonconducting plank etc.for down conductors for lighting arrester.

S & F Air Termination, single pointed copper rod 12 mm dia and 300 mm long complete fixed with brazing alll as specified and directed complete all as specified and as directed.

S & F Test point terminal block made of gun metal or Phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and as directed.

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore complete all as specified and directed .

S&F Wooden/plastic Pully for fixing /grouting in wall for running Al Strip complete all as specified and directed.

Supply and fitting of Front insertion type Double locking Gas Outlets for Oxygen gas system fully complies and meet with BS EN ISO 9170-1-2008(CE Marked) complete all as specified and directed. Make -Ramson/S.kumar/Mediline/Arosons and equivalents.

Supply and fitting of Front insertion type Double locking Gas Outlets for Vacuum system fully complies and meet with BS EN ISO 9170-1-2008(CE Marked)complete all as specified and directed. Make -Ramson/S.kumar/Mediline/Arosons and equivalents.

Supply and fitting of Front insertion type Double locking Nitrous Oxide Outlets for N20 fully complies and meet with BS EN ISO 9170-1-2008(CE Marked) complete all as specified and directed. Make -Ramson/S.kumar/Mediline/Arosons and equivalents.

Supply and fitting of Oxygen Regulator (CE Marked) as per medical standard complete all as specified and directed. Make -Ramson/S.kumar/Creative Health/Digiline and equivalents.

Supply Installation ,testing and commissioning of oxygen Back Pressure Compensated flow meter with BS EN ISO 15002-2008 (CE Marked) with control range of 0-15 lpm (Calibration with +/- 10% with 250 ml humidifier bottle (minimum )made of unbreakable polycarbonate material and autoclavable at 121 degree centigrade temperature. The flowmeter shall be strict precision ,durability standard and body shall be made of brass chrome plated materials . The flowtube ,durability standard and body shall be made of clear , impact resistant polycarbonate. Flowtube shall have large and expanded 0-5 lpm range for improved readability at low flows with inlet filter of stainless steel wire mesh to prevent entry of foreign particles. Make :-Ramson /S Kumar or its equivalent make as approved by accepting officer.

Supply,Installation, Painting, testing and commissiong of Copper Piping as per technical specification of Medical standard 12 mm OD X 0.7 mm thick,All as specified as per medical standards BS:13348 complete as directed by Engr- in - Charge.NOTE - Rate deemed to be inclusive of all type of fittings, supports ,clamps required for hanging or fixing of copper pipeline , Cutting of existing pipe line and inserting of new pipeline by welding work or brazing work and all other work required for proper functioning of medical Gas system. No extra payment shall be made for any works with respect of this work. Make- Mexflow/Mahananda

Supply,Installation, Painting, testing and commissiong of Copper Piping as per technical specification of Medical standard 15 mm OD X 0.9 mm thick,All as specified as per medical standards BS:13348 complete as directed by Engr- in - Charge.Make- Mexflow/Mahananda/ Mehta tubes. NOTE - Rate deemed to be inclusive of all type of fittings, supports ,clamps required for hanging or fixing of copper pipeline , Cutting of existing pipe line and inserting of new pipeline by welding work or brazing work and all other work required for proper functioning of medical Gas system. No extra payment shall be made for any works with respect of this work.

Supply,Installation, Painting, testing and commissiong of Copper Piping as per technical specification of Medical standard 28 mm OD X 1.2 mm thick,All as specified as per medical standards BS:13348 complete as directed by Engr- in - Charge. NOTE - Rate deemed to be inclusive of all type of fittings, supports ,clamps required for hanging or fixing of copper pipeline , Cutting of existing pipe line and inserting of new pipeline by welding work or brazing work and all other work required for proper functioning of medical Gas system. No extra payment shall be made for any works with respect of this work. Make- Mexflow/Mahananda.

Supply & Installation of 6 Point Main Oxygen Manifold maximum for 4 Gas Cylinders with NRVs/ Isolation Valves, Tail Pipes and brass fittings. All as specified as per medical standards BS:13348 complete as directed.

Supply & Installation of 4 Point Nitrous Oxide Manifold maximum for 2 Gas Cylinders with IOX-14 Regulator NRVs/ Isolation Valves, Tail Pipes and brass fittings. All as specified as per medical standards BS:13348 complete as directed.

Supply,installation ,testing and commisssioning of ward suction unit or ward vaccum unit with above 600 ml suction collection jar -01 Nos as per specifications mentioned below :- (a) The Vaccum regulator should have a vaccum gauge with analog display. The scale should be in mbar or mmhg as required by end user . (b) 1 Nos of Suction Regulator and 1 Nos of 600 mm polysulphone / polycarbonate collection jar (c) Suction regulator should be supplied with saftey jar, including and anti bacterial filter and an anti -overflow safety device and should have wide membrane continious suction controller. Make:- Ramson/ S Kumar/ HMP/ Oxicarrengineers/ Global medlife solution/ Lifeline Medison and equivalents.

Supply,installation ,testing and commisssioning of medical gas hose assemblies 12mm ,15 Bar as per standard high pressure hose antistatic duly colour coded, nitrous Oxide compressed air and Vaccum as per technical specification / antistatic and colour coded rubber tube -white for oxygen , blue for nitrous oxide , black for compressed air and yellow for vaccum and yellow for vaccum and low pressure tubes for vaccum application. Make:- Ramson/ S Kumar/ HMP/ Oxicarrengineers/ Global medlife solution/ Lifeline Medison and equivalents.

Supply and fixing of Ward Degreased Isolation Valves for 12 mm copper pipe for Medical Usage with Brass Adaptors complete all as specified and directed. Make : RN/Superflow/Legris Made in India and equivalents.

Supply and fixing of Factory Degreased Isolation Valves for 15 mm Copper Pipe for Medical Usage with Brass Adaptors complete all as specified and directed. Make : RN/Superflow/Legris Made in India and equivalents.

Supply and fixing of Factory Degreased Isolation Valves for 28 mm Copper Pipe for Medical Usage with Brass Adaptors complete all as specified and directed. Make : RN/Superflow/Legris Made in India and equivalents.

Supply, installation, testing & commissioning of microprocessor based medical gas alarms should be capable of monitoring a maximum of 2 medical gas services by means of pressure sensors which detect deviations from the normal operating limits of either pressure or medical vacuum. The area alarm should have a digital display of pressures . Each gas service should be displayed by coloured LED's to show 'Normal' (green), 'Low' and 'High Pressure' (red) conditions. Failure indicators Should be displayed by flashing lights and normal indications Should be steady. Adjustment and parameter setting is possible. Makes: Creative Health Tech/ Digiline/Medline/ Made in India/Indigenous and equivalents.

Supply and fix Vaccum System Dry Run Non Lubricated Air Compressor of capacity 9.25 CFM with receiver of capacity 225 Ltr working pressure 142 PSI,with pressure Switch ,Safety valve ,Starter etc complete all as specified and directed Make :- Hitachi Babicon, elgi and equivalents.

Supply and fix 3 Phase 3 HP 415 V Motor with pulley , Motor Rail for belt Tightness adjustment, suitable for air compressor at item no.17 complete all as specified and directed Make :- Kirloskar, CG and equivalents.

Supply and fix Air Dryer of capacity 20 CFM , Dew point 40 Dregree with filter complete all as specified and directed

Supply and fixing of Fire Extinguisher Water CO2/stored Pressure type, 9 Ltr capacity complete all as specified and directed.

Supply and fixing of Fire Extinguisher Dry Chemical Powder(ABC) type,10 Kg Capacity complete all as specified and directed.

Supply and fixing of Ceiling hook complete all as specified and directed.

Supply only Fire Beater complete all as specified and directed.

M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for One light point controlled by one, one way switch 5 Amps

-Ditto- All as per Item No. 73 but specified for One ceiling fan / exhaust fan point controlled by one , one way switch and regulator

-Ditto- All as per Item No. 73 but specified for One 3 point 5 Amps socket outlets point controlled by one switch on the same board

-Ditto- All as per Item No. 73 but specified for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

-Ditto- all as per item No 73 here in before but for one light point controlled by one, two way switch 5 Amps

-Ditto- all as per item No 73 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board.

S & F Switch piano flush type single pole one way 5 Amp, 230 Volts complete all as specified.

S & F Modular switch piano single pole flush type, two way, 6 amps, 230 volts.complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 Amps complete all as specified and directed.

S & F Switch socket combination flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts complete all as specified

S&F Switch socket combination 2 in 1 3 pin, 15 Amp flush type universal.

S&F ceilling rose three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified

S & F sheet metal enclosure MCB VTPN 8 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 125 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed.Make- L&T, Cat No: DBVTH008DD and equivalent in Legrand and Indo Asian.

S & F MCCB 4 Pole 415 volts 125 Amps with thermal - magnetic release with breaking capacity 36 KA and with adjustable overload setting complete all as specified. Type- DN2-250D Model:-CM92108OOL1OG, Make:- L&T and equivalent in Legrand and Indo Asian.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified. Make:- L&T, Model -DBSPN006D and equivalent in Legrand and Indo Asian.

S & F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed.Make- L&T, Cat No: BB20320C or equivalent in Schinder/ Legrand.

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make -L&T,Model No-BB10060C,BB10100C,BB10160C and equivalent in Schinder/ Legrand.

S & F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as directed by Engineer-in-Charge.Model -REGALBATTENT8UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Surya, all as specifed and directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells,Model No - ENDURAPEARLSL15WLED757SASYTOPCMP Or Equivalent in CG and Surya all as specified and directed.

S&F exhaust fan 300 mm sweep MS Body, 3 wing 1400 rpm, single phase 240volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type Make : Orient or Equivalent in USHA/ Havells.

M&L Sub main wiring 2 x 6 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

M & L Submain wiring with 4 runs of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC concealled conduit ISI marked and its accessories including two run of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed.

Supply and fixing for single pole and neutral enclosure with a two pin and earth plug and socket complete with on one single pole MCB 20 Amp, 240 volts.Make:- L&T/Havells/Legrand

S&F 63 A ,5 Pin (3 P+N+E) Metal Plug & Socket Enclosure for Three Phase connection all as specified and directed. Model:- DBMPS463SD, Make :-L&T or equivalent in Schinider and Legrand.

S & F MCB TPN 415 volts suitable for fixing in Industrial 3 Phase Socket 63 A complete all as specified and directed.Model:-BB40630D Make :-L&T or equivalent in Schinider and Legrand.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.

Saraswati Auto Works

Markson