REPAIR AND MAINTENANCE OF WOODEN FURNITURE UNDER GE SILCHAR

Amount

Sch "A" Part I (WOODEN FURNITURE) Dismantling of the worn out unsv parts of Bed Hard (FD-246) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs (head rest side)

Legs(foot rest side)

Long Rail

Short Rail

Head Rest Complete

Foot Rest Complete

Top with 12 mm thick ply wood BWR grade IS-303

Stiffner of size 40x60x900mm

Supply and fixing of 3.5mm thick one side thick face plywood

Supply and fixing of half round teakwood beading

Dismantling of the worn out unsv parts of Bed Hard double (box type) (FD-1120) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Head rest (25mm thick exterior grade prelaminated partcle board)

Foot rest (25mm thick exterior grade prelaminated partcle board)

Sides of 25mm thick exteriior grade prelaminated partcle board

Bottom of 9 mm thick exterior grade particle board

Top of 12 mm thick

Mattress of size 1900x900x100 mm 32 density duly covered with cotton cloth(approved colour)

Dismantling of the worn out unsv parts of Bed Hard (Single) (FD-1120) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Teak wood beading 40x40 mm (made to shape)

Head rest (25mm thick exterior grade prelaminated partcle board)

Foot rest (25mm thick exterior grade prelaminated partcle board)

Sides of 25mm thick exteriior grade prelaminated partcle board

Top of 12 mm thick particle board

Mattress of size 1900x900x100 mm 32 density duly covered with cotton cloth(approved colour)

Dismantling of the worn out unsv parts of Book case wooden (FD-237) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood.

Long rail of 2nd class hard wood (of leg frame)

Short rail of 2nd class hard wood(of leg frame)

Back side 6 mm thick BWR grade plywood

Top 18 mm thick Pre-laminated particle board .

Both side /bottom/partition made out of 18 mm thick Pre-laminated particle Board.

Shelf made out of 18 mm thick Pre-laminated particle board with 6 mm thick wooden beading in front

Shutter made out of 18 mm Pre-laminated particle board commercial with 4 mm thick wooden beading all round with CP knob to be provided.

CP Knob

Dismantling of the worn out unsv parts of Chair wooden Bottom W/O Arms (FD-225) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Front leg

Rear Leg

Rail (Any side of Seat frame )

Stiffener

Back Rest

Seat ply made of 6 mm thick ply wood BWR grade having perforations

Dismantling of the worn out unsv parts of Chair Easy (FD-229 & FD-1108) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Front Leg

Rear Legs

Front/back rail of Seat frame

Side rail of seat frame

Lower/Upper rail of back rest

Side rail of back rest

Arms rest

Dismantling of the worn out unsv parts of Chair Dining (FD-228 & FD-279) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Front Leg

Rear Legs

Front rail of Seat frame

Back rails of seat frame

Side rails of seat frame

Back rest

Stiffiner

Dismantling of the worn out unsv parts of Chair Dining Offrs (FD/MAP-II/04) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Front Leg

Rear Legs

Front rail of Seat frame

Back rails of seat frame

Side rails of seat frame

Seat ply of 12 mm

Stiffiner

75 mm thick 40 density foam with duly covered by tepastiy cloth/letherite meterials (not less then Rs.250/- per meter) for seat

Dismantling of the worn out unsv parts of Chair writing (FD-280) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Front legs

Rear legs

Front rail of seat frame

Rear rail of seat frame

Side rail of seat frame

Back rail of back seat

Stiffiner

Arms Rest

Dismantling of the worn out unsv parts of Table 3'x2' with Drawer/WO Drawer (FD-283) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood

Side rail

Front Rail (with drawer)

Front rail/rear rail (Long)

Drawer complete with 2nd class hard wood and bottom 6 mm ply wood BWR grade

Stiffiner

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unsv parts of Table 3'x3' wooden (FD-291) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood

Rail of any side

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unsv parts of Table Writing (FD-275) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood.

Side Rails

Front Rails

Stiffiner (Short Side)

Long stiffiner in between both side stiffiner

Cabinet Side of table made out of 18/19 mm MDF board comm ercial with 1mm thick laminated sheet

Cabinet back side with 6 mm ply wood commercial

Cabinet bottom of 19 mm thick MDF board.comercial

Cabinet bottom legs of 2nd class hard wood

Cabinet front shutter made of 19 mm thick MDF board commercial with 1 mm thick laminated sheet with 50 mm hinges and drawer locks(ISI mark)

Drawer sides made out of with 2nd class hard wood with bottom 6 mm thick ply wood commercial with CP Knobs in front and locking arrangement.

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unsv parts of Table Dining 6 Pers (FD-239) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood.

Side rail

Long rail

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unsv parts of Table Dining 8 Pers (FD-239) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood.

Side Rail Long

Side rail short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unsv parts of Table Centre (FD-274 & FD-235) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood.

Side Rail Long

Side rail short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unsv parts of Teapoy (FD-232 & FD-278) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood.

Side Rail Long

Side Rail Short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unsv parts of Peg Table (FD-277 & FD-384) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood.

Side Rail Long

Side Rail Short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unsv parts of Side Board (FD-241) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Legs made out of teak wood.

Long rail of 2nd class hard wood

Short rail of 2nd class hard wood

Back side 6 mm commercial ply

Top 18 mm thick Pre-laminated particle board .

Both side /bottom/partition made out of 18 mm thick Pre-laminated particle Board.

Shelf made out of 18 mm thick Pre-laminated particle board with 6 mm thick wooden beading in front

Shutter made out of 18 mm Pre-laminated particle board commercial with 4 mm thick wooden beading all round with CP knob to be provided.

Drawer complete with 2nd class hard wood and bottom 6 mm thick ply wood connected with CP knobs in front.

Dismantling of the worn out unsv parts of Table dressing Gents with Mirror (FD-230) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Top made out of 12 mm thick Pre-laminated particle board.

Bottom 12 mm thick Pre-laminated particle board comercial

Back made out of 12 mm thick ply wood comercial

Side and partition made out of 12 mm thick Pre-laminated particle board .

Drawer made out of 12 mm thick plywood with one Nos CP knob in front.

Mirror of size 760 x 380 x 5mm,Make-saint Gobain/Modi Guard

Mirror frame made out of 2nd class hard wood with 6 mm thick ply wood commercial for back with 2 nos key place for hanging

Dismantling of the worn out unsv parts of Table dressing Ladies with Mirror (FD-251) and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Long rails

Short rails

Top 18 mm thick Pre-laminated particle board with 1 mm thick plastic laminated sheet and 4 mm thick wooden beading in front..

Bottom/ partition made of 18 mm thick Pre-laminated particle board comercial with 6 mm thick wooden beading.

Side of 18 mm thick pre-laminated particle board with 4 mm thick wooden beading.

Back 12 mm thick ply BWR

Mirror size 1220 mm x 366 mm x 5 mm thick ,Make-Saint Gobain/Modi Guard

Mirror Frame of hard wood with 6 mm thick ply commercial in back.

Sliding glass 300x300x6mm thick with almn Channel complete

Drawer made out of 12 mm thick plywood with one Nos CP knob in front.

Removing of old existing polish by washing with caustic soda and rubbing with sand paper and making smooth surfaces and apply two coats of french polish upto glossy finish for the following wooden furniture on specified on drawing and as directed by engineer-in-charge.

Bed Hard (FD-246)

Book case wooden (FD-237)

Chair WB W/O Arms (FD-225)

Chair Easy (FD-229 & 1108)

Chair Dining (FD-279 & 228)

Chair dining offrs with cushion (FD/MAP-II/04)

Chair Writing (FD-280)

Table 3'x2' with Drawer/WO Drawer (FD-224 & 231)

Table 3'x3' wooden (900x900x760 mm) (FD-283)

Table Writing (FD-275)

Table dining 6/8 Pers (FD-239)

Table Centre (FD-235 & 274)

Teapoy (FD-232 & 278)

Peg Table (FD-277 & 384)

Side Board (FD-241)

Table dressing Gents (FD-230)

Table dressing Ladies (FD-251)

Sofa set 5 seater (FD-281 & FD/E6/MA P-II/02)

Sofa set 4 seater (FD-281 & FD/E6/MA P-II/02)

Almirah large wooden with shelves (FD-21(M))

Almirah Medium wooden with shelves (DB-3939)

Removing of old worn out UNSV cane from various type of furnitures and re-canning the same with new plastic white cane of 2 mm for canning and 4 mm wide half round for beading. Canning shall be done as per godrej pattern. (FD-279, 229 & 280)

Replacement of old UNSV cushion with new cushion foam 530x560x100mm thick 40 density rubber foam duly covered with marking cloth & Tapestry cloth(as approved by GE)having one side long chain with double interlocking.Cost of tapestry cloth not less than Rs 250/- per meter.(Make of foam-Sleepwell/kurlon) (FD-281)

Supply of new cushoin cover to fit into cushion foam of Size 530x560x100mm thick 40 Density (Tapestry cloth as approved by GE) having one side long chain with double interlocking. Cost of tapestry not less than Rs 250 per meter (FD-281)

Renewal of old unsv plywood 12 mm thick BWR grade commercial conforming to IS specification 303-1989 of Charpoy GI pipe with plytop (FD-220)

Renewal of old unsv plywood 12 mm thick BWR grade commercial conforming to IS specification 303-1989 of Charpoy IP with hard top (FD/MAP-II/01)

M/S M L Pratihar

M/S TAPAN KUMAR RAY

M/S R A ENTERPRISE