Construction of Gas Crematorium - Electrification, Supply and installation of 15KVA DG set at Gas Crematorium Puduppariyaram

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc.as required(RoHS compliant modular accessories)

Single Control light point with 6A, plate ceiling rose - Short point (90.2.1.1 )

Single Control light point with 6A, plate ceiling rose - Medium point. (90.2.1.8)

Single Control light point without ceiling rose - Short point (90.2.1.3 )

Single Control light point without ceiling rose - Medium point. (90.2.1.10 )

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point (90.2.1.4)

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator - Medium point. (90.2.1.11)

Combined plug point with 6 A, 5 pin plug socket controlled by 6A switch in the same switch board as that of light points. (90.2.1.6)

Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

1200 mm 1X20W LED Lamp with box type fixture. (90.3.20.3)

1200 mm 2X20W LED Lamp with box type fixture. (90.3.20.4)

Do - directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire and giving connection etc. as required.

1200 mm 1X20W LED Lamp with box type fixture (90.3.22.3)

Supply and fixing cast aluminium stove enamelled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable with 7w LED bulb to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated 3 core round copper conductor flex wire conforming to to relevant ISS or extending the original wiring and making good the surface as required.(od15213/ 2019_2020)

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of LED Street light fitting IP 65,pressure die-cast housing with induvidual LEDs with modular secondary optics 25watts with driver and including all necessary all accessories etc in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required - BAJAJ make BRLEP25W LED/Endura Citylite Platinum 25 LED / osram strada plus/ phillips make.(od20530/2019_2020)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps.(90.3.18.1)

Conveyance,installation,testing and commissioning of exhaust fans of size up to 305mm in the existing opening, fixing necessary anchor bolts/bolt and nuts etc.as required including giving connections with the supplied wire along with the exhaust fan(od15357/2019_2020)

Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required (90.4.8)

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm Plastic shade and 7 W LED lamp and giving connection etc as required. (od15215/2019_2020)

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

1200mm sweep - 5star rated ceiling fan complete with 300mm down rod,canopies, shackeles etc. working on 230V/240V single phase A/C (90.4.5.2)

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.(90.4.1)

Supply and providing every additional length of down rod of 15mm heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required. (od20558/2019_2020)

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm. (90.6.10.1)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq.mm 2 Run (1.17.2)

2.50 sq.mm 2 Run (1.17.11)

S&F following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.3 Module (100mmX75mm) (1.27.2)

Do - 8 Module (125mmX125mm) (1.27.5)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet.(1.24.5)

Do - 15/16 amp switch. (1.24.3)

Do - 3 pin 5/6 amp socket outlet. (1.24.4)

Do - 5/6 amp switch. (1.24.1)

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages,colour washing etc.as required. 2 core 6 sq mm with factory made clamp.(90.12.7.2)

4 core 16 sq mm with factory made clamp (90.12.7.41)

4 core 10 sq mm with factory made clamp (90.12.7.40)

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16sq mm. (90.12.5.41)

90.12..12 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil 2 core 6 sq mm

90.12.5.2 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 6 sq. mm (19mm) (9.1.1)

4 core 10 sq mm (25mm) (9.1.32)

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground including excavation of trench 50/38 mm or nearest size(90.12.10.2)

Do DWC Pipe 77/63 mm do (90.12.10.4)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2 metre long etc. with charcoal/coke and salt as required.(od14959/2019_2020)

Providing and fixing 25mmx3mm G.I strip earth lead from the test joint to the earth plate. (od14961/2019_2020)

Do - 2x25mmx3mm G.I strip test joint for earthing system. (od68978/2018_2019)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 2.00 copper conductor.(14SWG) (90.16.1.1)

Do - 2.65mm copper conductor (12 SWG) (90.16.1.2)

Do - 3.15 mm copper conductor (10 SWG) (90.16.1.3)

Suppl and laying of 15mm B class GI pipe(medium class) with all required accessories laid 0.6m below ground level including excavating trench of suitable size and refilling etc.as requiredas protective covering to earth leads. (90.16.2.1)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) (90.16.5.1)

Supply of superior quality 2.65mm copper earth socket and including crimping etc.as required. (90.16.5.2)

Do - 3.15mm copper earth socket and including crimping etc. as required. (90.16.5.3)

Supply and providing12x3mm brass nut and bolt etc.as required.(od21888/2019_2020)

Supply and providing 25 x 6 mm brass nut and bolt etc.as required.(od20879/2019_2020)

Supply and installation of sheet steel, phosphatised and painted,dust and vermin proof enclosure of MCB DB including copper /brass bus bar,neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colour washing etc.as required. 4way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) (90.11.1.14)

Do - single pole MCB DB,240v,on surface/ recess - Do - 12 way, Double door. (2.3.3)

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 amps 4 pole isolator (2.13.2 )

40 amps 2 pole isolator (2.12.1)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30/100 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 A rating, 4 pole RCCB, 100 rnA (2.15.3)

25A rating, 2 pole RCCB, 30 rnA (2.14.1 )

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

6 A. to 32 A. ratings , SP MCB, "C" curve,10 kA breaking capacity. (2.10.1 )

Do - 6 A. to 32 A. ratingsTP MCB, "C" curve,10 kA breaking capacity. (2.10.4 )

S&F 4 Pole enclosure MCB DB sheet steel phosphatised , painted, dust and vermin proof on surface/ recess etc. as required. (od121450/2019_2020) for furnaces.

S&F 5A to 32A rating,415 volts, "C" curve, MCB suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. TPN MCB (2.10.5)

Do - DP enclosure MCB DB sheet steel phosphatised, painted, dust and vermin proof enclosure on surface/ recess complete with connections,testing and commissioning etc.as required. (od121452/2019_2020)

Do - 6A to 32A ratings DP MCB "C" curve,10 kA breaking capacity in the existing MCB DB complete with connections,testing and commissioning etc.as required. (2.10.3)

Supply and providing and fixing 63A TPN disconnector fuse switch unit in sheet steel enclosure with ISI marked HRC fuses on wall/angle iron frame including drilling holes in frame, making connections etc.as required.

Supply & installation of dust and vermin proof, 3 Phase Sintex Meter Board( GS-MB- 5628 (515 x 240 x 145) including p/f 3Nos. 63 A HRC Fuse Base with HRC Fuse link ,63 A neutal link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages colour washing etc. as required. (od15345/ 2019_ 2020)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps. (90.3.18.2) For Srevice Pipe.

Supply and providing M8 anchor bolt hook in wall / parapet for binding support for service main.

Supply and installation of 15 KVA/12KW, Three phase Diesel Generating Set with CPCBII approved acoustic enclosure comprising of Cummins/Leyland/Escorts/ equivalent,Radiator Cooled Diesel engine 1500 RPM (Make Cummins/Leyland/Kirloskar.) complete with standard accessories Coupled to “Stamford/LS/equivalent” Alternator rated at 15 KVA/12KW at 415 Volts mounted on Channel Iron Base Frame complete with Fuel Tank with full tank Diesel, Standard manual Control System and Batteries with battery charger.The DG set should have warranty of 3 years from the date of installation. (Data)

Earth work excavation in ordinary soil and depositing with a lead up to 50 m and lift above 3.00 m but up to 4.50 m including neat banking.

Cement concrete 1:2:4 using 20mm (nominal size) broken stone for reinforced concrete work.

Form work for reinforced cement concrete in slabs including wooden planks, joists, bamboo posts and labour for taking down after completion of work. (Hire and labour charges only)

Plastering with cement mortar 1:4, 12mm thick one coat.

Supply and providing following size M. S. pipe - 5mm thickness complete with suitable size 12mm flange coupling with minimum 4/5mtr using allied packing with MS bolt with washer and rising the same on the wall /parapet using chain pullies, scaffoldings, supports with M.S angles /channels etc. including painting the pipe with one coat of zinchromate primer over a coat of high temperature resistance alu. paint etc. for extending the exhaust pipe of the newly errected D.G.sets. 50 mm dia or nearest size B Class MS pipe.(od20893/2019_2020)

Supply and installation of switch gear units in sheet steel enclosure arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unitto wall, making good the damages, colour washing etc. including giving necessary connections as required. 63 A, 415 V, 50 Hz, AC 23 A duty, 4 pole on-load change over switch.

Fabrication, supply, conveyance and fixing frame work made out of suitable size angle iron/ flat cut and welded to shape of suitable size painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes to mount the switch gear, fixed to wall using suitable size anchor bolts or grouted to wall, making good the damages, colour washing etc as required.

Fabrication, supply, conveyance and fixing cable entry/ wire way box made out 1.60 mm CRCA sheet of suitable size to match the switch gear and enabling the cables to be connected without strain, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes and mounting to the switch gear etc as required.

Supply and fixing Red,Green,blue,yellow,Orange colours LED indicator,AC/DC as required. (od18926/2019_2020)

Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required. (od63845/2019_2020)

Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.50 cm,4cm or 5 cm height.

Supply and providing 12mm thick 2x1m electrical grade chequied type rubber mat in front of panels & Generators.

Charges for preparation of electrical scheme in A3 sheet. (od20572/2019 _2020

Copying charges for additional A3 sheet.(od20571/2019 _2020

Fees for getting sanction from Electrical inspectrate including all laison work etc.(actuals will be paid on production of relevant documents.) (od 20570/2019_2020)

RAMAN.V

Bidder Name

RAMAN.V

Mohammed Rafik