Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC | L1 | Accepted-AOC As per CWC decision | |
| 2 | L2₹14.3 L+₹2.5 L (20.7%)Rejected-AOC | L2 | Rejected-AOC - |
Tender Value
₹14.4 L
EMD Value
₹28,828
Closing Date
15 Feb 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
THE GENERAL MANAGER, CORDITE FACTORY ARUVANKADU
THE GENERAL MANAGER, CORDITE FACTORY ARUVANKADU,THE NILGIRIS-DT,643202
Repairs to floor in front of Admin area, repairs to Roof and Repairs to floor of office of MOE and QC(TC) of Bldg.No. 62 (Admin block) at CFA
2024_MIL_183259_1
TE/CFA/24/EO/CIVIL/2023-24
Open Tender
Civil Works
Item Rate
112 days
ARUVANKADU
As per NIT
4 documents required · 4 mandatory
₹0
₹28,828
Yes
1 Mar 2024
26 Jan 2024
16 Feb 2024
26 Jan 2024
15 Feb 2024
26 Jan 2024
26 Jan 2024 - 9 Feb 2024
Amount
Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) as directed
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 12 cm deep and getting out in hard dense soil as directed.
Laying of Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface (Except material) as directed.
Cement concrete type B-1, 1:2:4 (20mm graded aggregate), 70mm thickness as directed.
M&L for Chequered cement concrete tiles with grey cement and pigment, 25mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed of CM 1:6, 15mm thick.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete, 1:3:6, set in CM 1:4 as directed.
M&L for Rendering 12mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 as directed.
M&L for Providing precast cement concrete, 1:2:4 mix ratio using 20mm graded aggregate in landings, cover slabs (for man holes / Drainage etc.), shelves and similar articles with plain faces including formwork and finishing as directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed.
Dismantling of Single layer Mangalore pattern or similar tiles in roofing as directed.
Laying only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry (Except tiles).
Laying only Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, as directed.
M&L for Galvanised, corrugated mild steel sheeting, 0.63mm, with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 as directed.
M&L for clean sawn battens at 30cm centres, of size exc. 5 Sq.cm and n.exc. 15 Sq.cm, using second class hardwood on roof, as directed.
M&L for creosote oiling on Tiles or slate battens, any size and spacing of 30cm, prepared and treated all over (measured overall on one side only, spaces not deducted) as directed
M&L for Roof treatement by following method:- (a). Surface preparation: Cleaning the surface well including cleaning mosses, wild growth etc and cleaning with wire brush or grinder to level the uneven surface and sharp points, wash the slab to remove dust, dirt, oil, grease etc, , cut and open all concrete cracks which are more than 0.50mm in the width and upto 10mm and filling the crack with cement mortar mixed with modified styrene butadiene latex (Supplied as a ready to use bonding agent in liquid form to repair of spalled concrete, floors, etc - Dr. Fixit Pidicrete URP or equivalent as approved by EIC). (b). Fillet Treatment: Providing and laying of 50mm X 50mm angle fillets at the junction of slab and vertical walls prepared with cement sand mortar in the ratio of 1:3 admixed with 10% modified styrene butadiene latex (Supplied as a ready to use bonding agent in liquid form to repair of spalled concrete, floors, etc - Dr. Fixit Pidicrete URP or equivalent as approved by EIC) by eight of cement. (c). Water Proof Coating: Providing and applying one coat of Water based primer composed of Acrylic emulsion polymer (Dr. Fixit Prime Seal or Equivalent as approved by EIC) and 02 coats of Single component cold applied Elastomeric water proof coating (Dr.Fixit Roof Seal or Equivalent as approved by EIC) with sandwiching 45 GSM geo textile with a time interval of 4 to 06 hours and extending the coat to the vertical surface if any (parapet / Concrete edge sides) as per manufacturer instruction. (d). work should carried out by the OEM authorised applicator / Dealer as approved by EIC.
Removing excavated material exc. 1.50 km but n exc. 5 km (rocks / broken concrete/ soil etc ) and depositing where directed
Dismantling boarding, any description, fixed in any position with screws as directed.
Dismantling timber scantlings 40 sq. cm Framed work and over in section, in any position as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as directed.
Taking down cement or cement lime plaster stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete.
M&L for Non - Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match including screed bed of 15mm thick in CM 1:6 as directed and as approved.
Removing building materials etc. to a distance upto 800 m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination [Timber-Hardwood (1.13 Cum = 1Load)] as directed.
RAVIKUMAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .