Civil Work

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of

2 serviceable materilas and disposal of unserviceable materials with all lead 43.80 Cum 549.49

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of

3 serviceable materilas and disposal of unserviceable materials with all lead 157.50 Sqmt 47.94

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

Dismentling steel work including distempering and stacking the materials

with all lead and lift.

Excavation for foundation upto 1.5 m depth including sorting out and

6 stacking of useful materials and disposing off the excavated stuff upto 50 150.90 Cum 271.45

Meter lead. (D) Soft rock not requiring Blasting

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

7 out and stacking of useful materials and disposing off the excavated stuff 30.00 Cum 294.67

upto 50 Meter lead. (D) Soft rock not requiring Blasting

Filling in foundation and plinth with sand in layers of 20 cm. Thickness

including watering ramming and consolidating etc. comp.

Filling foundation and plinth with murrum or selected soil in layer of

9 cm in thickness including ramming watering and consolidating etc. 99.90 Cum 296.29

Anti-Termite System: Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing LLDP

(Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with

inbuilt pressure compensation chip every 30 cm interval in the tube,

having working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour

fixed by P-clips and nails.The LLDP pipe shall be installed at the entire

periphery of the building and at internal network of building at a depth of

20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted as

per building layout) & ends of loop pass through a PVC elbow of minimum

32 mm ID at junction box of wall and floor level, entering into a steel

reinforced grooved flexible pipe of minimum 22 mm ID leading into

junction box and the loops shall terminate in junction boxes & test every

junction during injecting chemicals for termite control

treatment.Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- machine cut stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6-

11 machine cut stone aggregates 40 mm nominal size) and curing complete 34.32 Cum 3080.90

excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, and Mass concrete.

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns up to Plinth

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns on Ground

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns on Terrace

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (C) Ground Beam and

Providing and laying controlled cement concrete M-150 and curing

17 complete including the cost of form work but excluding the cost of 18.00 Cum 4479.45

reinforcement for reinforced concrete work in (C) Plinth Slab

Providing and laying controlled cement concrete M.200 and curing

18 complete including the cost of formwork and excluding reinforcement for 12.90 Cum 6258.02

reinforced concrete work in (C) Beam at Ground Floor

Providing and laying controlled cement concrete M-200 and curing etc.

19 complete including the cost of form work and reinforcement for 1.20 Cum 6750.73

reinforced concrete work in (C) Chhajja at Ground floor

Providing and laying controlled cement concrete M-200 and curing etc.

20 complete including the cost of form work and reinforcement for 1.23 Cum 8841.47

reinforced concrete work in (C) Lintel at Ground floor

Providing and laying controlled cement concrete M.200 and curing

21 complete including the cost of formwork and excluding reinforcement for 16.80 Cum 7417.53

reinforced concrete work in (C) Ground floor Slab

Providing TMT Bar FE 500D reinforcement with fusion bonded Epoxy

coating not less than 175 micron thickness and up to 300 micron to

22 reinforcement bars as per IS-13620-1993 /ASTM-775M (including testing 14400.30 kg 77.29

of coating at plant and all taxes) for R.C.C. work including bending,

binding and placing in position complete upto floor two level.

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

23 (A)In beams and joists, channels angles Tees, flats, with connecting plates 2.58 Quintal 9108.48

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter.

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and fixing M. S. grills of required pattern to frames of windows

etc. with M. S. flats at required spacings and frame alround having min.

25 weight of Grill 25kg/sq.m, square or round bars with round headed bolts 25.80 Sqm 2893.02

and nuts or by screws including priming coat of approved quality and two

coats of enamel paint, as directed by engineer in charge (A) Plain Grill

Providing and fixing 90cm high Stainless steel railing made from anti

corrosive 304 grade S. S. pipe of 50mm dia. (16 Gauge) as hand rail with S.

S. 304 grade Balusters / Posts of Pipe 50mm dia. (16 Gauge) as a vertical

26 support fixed in RCC slab at 1.2m c/c including two horizontal S. S. pipes 26.58 Rmt 2578.53

of 16mm dia. (16 Gauge) at equal Distance fixed by 18.75mm dia (16

Gauge) S. S. pipe with baluster including accessories as per Detailed

Drawing as directed etc. complete.

Brick work using common burnt clay building bricks having crushing

27 strength not less than 35 kg/sq.cm. in foundation and plinth in cement 8.70 Cum 4121.55

mortar 1:6 (1 cement : 6 fine sand) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine sand)

Conventional (Ground FLoor)

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine sand)

Conventional (Terrace Floor)

Half brick masonry in common brunt clay building bricks having crushing

30 strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in 53.10 Sqm 667.96

super structure. Conventional for Ground floor..

Providing and fixing 150 mm wide, approved quality chicken wire mesh at

junction of brick work and RCC work or two dissimilar surfaces, at all

heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing etc. complete

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls / concrete wall for interior

32 plastering and finished even and smooth along with floating coat of neat 465.50 Sqm 220.61

cement slurry etc. comp. in (ii) Cement mortar 1:4 (1-cement :4-sand) 1)

Plaster at Ground Floor

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls / concrete wall for interior

33 plastering and finished even and smooth along with floting coat of neat 40.80 Sqm 243.94

cement slurry etc. comp. in (ii) Cement mortar 1:4 (1-cement :4-sand) 2)

Plaster at Terrace Floor

Providing 10 mm thick smooth cement plaster in single coat for plastering

on ceiling and soffits of stairs and finished even and smooth along with

floating coat of neat cement slurry etc. comp. (i) Cement mortar 1:4 (1

cement: 4 sand). 1) Plaster at Ground Floor

20mm thick double coat sand faced cement gutka plaster on walls upto

height 10 metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1-sand) including 1cm x 1cm grooves etc. complete.

36 Providing throating or plaster drip and moulding to R.C.C. Chhajja.. 35.70 Rmt 42.02

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Applying two coats of (white cement based) or (acrylic lappy (putty)) or

equivalent and two coats of primer of approved brand and manufacture

37 on new wall surface to give an even shade including thoroughly brushing 570.00 sq.m 40.59

the surface free from mortar dropping and other foreign matter and sand

papered smooth. for All floor.

Wall painting (three coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Finishing wall with Weather proof exterior 100% acrylic emulsion paint

With one coat of primer on wall surface to give an required shape even

shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete for All floor

Providing And filling with good quality cinder(steam coal) as directed by

41 engineer in charge in sunks in layers of 15 cm thick,including 1.95 Cum 555.42

watering,placing ,ramming well etc as directed, for all floor.

Provoding and fixing flush door shutters, solid core construction with

frame of first class hardwood with cross board and face veneer or

42 plywood face panels, including anodised alluminium butt hinges with 20.10 sq.m 1829.74

necessary screws. (B) Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP

depress panel shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings & fastener sleeve.

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of

size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

46 fixing on existing flooring by adhesive material including dismentaling of 78.60 Sq.m 1432.78

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of

47 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 12.30 Sq.m 1577.32

sand) and jointed with white cement slurry

Providing and laying Machine cut, free edges, mirror polished Granite Slab

flooring over 18mm (Average) thick base of cement mortar 1:6 (1-cement

48 : 6-coarse sand) laid over and jointed with grey cement slurry mixed with 26.10 Sq.m 2349.99

pigment to match the shade of slab including rubbing and polishing etc.

complete. (A) 18mm thick

Providing and laying Machine cut, free edges, mirror polished Granite Slab

18mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick

49 cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray 3.90 Sq.m 2310.17

cement slury mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

50 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 4.20 Sq.m 1171.59

coarse sand ) finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

51 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 46.20 Sq.m 1020.71

coarse sand ) finishing with flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing

and polishing etc. complete. (B) 30 mm thick

Providing and fixing mirror polished 18 mm thick Granite with full round

edge and polished of approved quality in clading on sill and around the

53 doors/ windows/ ventilation with 20 mm thick cement plaster CM (1:4) 17.40 Sqm 2215.85

and fixing with cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

Providing and laying 40 mm thick IPS (Indian Patent Stone) flooring in

cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate of 20 mm nominal size) laid in one layer over prepared base

and finished with a smooth floating coat of neat cement mixed with

approved yellow colour pigment of required shade at 0.35 kg/Sq.m to

obtain uniform colour and finish, including surface preparation,

compacting, trowel finishing, curing and complete as directed by Engineer-

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x9.8 mm having with water absorption less

than 0.5% and conforming to IS:15622 of approved make in all colours

and shades in for outdoor floors such as footpath, court yard, multi

modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1

cement: 4 coarse sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments etc. complete as

per direction of Engineer-in-Charge.

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank

57 of required capacity each with all necessary fittings and connection etc. 6000.00 Litre 3.95

complete on terrace.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [C] 25mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [A] 15mm.

Providing laying (to level or slopes) and jointing reinforced concrete Light

duty non-pressure pipes I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints including testing of

joints complete.(D) 300mm

Providing and fixing cast iron spigot and socket soil, waste and ventilating

pipes of the following nominal size.(C) 100mm dia.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of cutting

and making good the walls.

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Provision, Supplying and fixing White vitrious ching W.C. sqatting pan

Orrisa type 580 x 400 size with 100mm P or S trap, 25mm dia. C. P. Brass

flush valve and G. I. inlet connection etc. comp. (A) Vitreous ching long

pattern white or color.

68 Providing and fixing brass screw down stop tap.(A) 15mm dia. 12.00 Each 205.83

Providing and fixing ball cock of approved. quality as directed.(A) Copper

Metal (ii) 50mm dia.

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In white colour.

71 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia. 6.00 Each 67.91

72 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 6.00 Each 78.75

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

73 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 3.00 Each 854.58

wooden pluge with C.P. brass screws and washers.

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright. (i) 20mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia.

76 Providing and fixing Rubber plug for sink or wash basin. 6.00 Each 17.15

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm

and 450mm deep for pipe line with one or two inlets.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and

filling brickbats with dry masonry work at top for 45cm. height including

covering the top with stone including providing vatas in C.M. 1:3 with

finishing curing etc. complete as directed.

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black kadappa

stone 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on

exposed faces of wall in C.M. (1:4) etc complete.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(c) with oval conduit /PVC casing capping double lock type erected

flushed on wall/ceiling complete. iii) Cat.: III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected

83 on PVC / Metallic/Wooden box, single mounting base frame covered with 6.00 Pt 595.90

textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as

(c) with oval conduit /PVC casing capping double lock type erected

flushed on wall/ceiling complete. iii) Cat.: III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

84 box covered with appropriate front plate modules erected on / in wall / 3.00 Pt 431.27

ceiling as per pipe erected with following type of accessories. [I] For 6A

Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard /

mcb db board. (c) with oval conduit /PVC casing capping double lock type

erected flushed on wall/ceiling complete. iii) Cat.: III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

85 box covered with appropriate front plate modules erected on / in wall / 6.00 Pt 614.08

ceiling as per pipe erected with following type of accessories. [II] For 16A

Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(c)

with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type accessories. iii) Cat.: III

Supplying and erecting approved make of tube fitting with One no T-5

tube 24/ 28 W with Electronic ballast with each tube separately THD less

than 10 & built in adaptors, GI / PVC housing & mirror optic reflector,

suitable to work on 120V - 300V, A.C. supply with connector and adapter

if required. [Make of fitting & tube may be differ& fitting shall be

providing with tube]. ii) Cat.: III

Providing & erecting Approved make Ceiling Fan with double ball bearing

ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep complete,

canopy erected on existing hook or clamp with earthing [ Make shall be

approved by Engineer in Charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

89 down rod erected duly painted for fan complete with proper insulation 1.80 Mtr 108.07

without leakage and earthing.

Replacing approved make fan regulator resistance type for Ceiling fan

{credit of D.M. retained by Agency.}

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95,

91 THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt 6.00 Ea 535.30

,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet iii) Cat.: III

Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

92 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 24.00 Ea 258.56

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (iv) 16 to 20 watts

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (B) With 16 swg HGS metal conduit pipe and

accessories painted black. (b) 2 wire 2.5 sq. mm

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark. iii) Cat.: III

Providing & erecting 240 V MCB double pole switch for lighting Load (B

95 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing 3.00 Ea 295.93

box having following capacity (B) 40 Amp. iii) Cat.: III

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and erecting Sheet Steel powder coated MCB distribution board

- flush / surface mounted fitted with busbar, neutral link, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase incoming and

horizontal single phase outgoing (iv)12 way

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected

as directed (ii) 40Amps. DP. iii) Cat.: III

Providing and erecting Sheet Steel powder coated MCB distribution board

- flush / surface mounted fitted with busbar, neutral link, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase incoming and

horizontal single phase outgoing (iv)12 way

Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

98 incorporate any electronic component. for following Max. rating erected 3.00 Ea 4591.46

as directed (ii) 40Amps. DP. iii) Cat.: III

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of applications

with chamber and heavy duty cover.

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must

99 have 440VAC line supply with over-voltage protection. (i) above 36 to 48 3.00 Ea. 3345.12

watts (ii) Cat: III

Excavation for foundation upto 1.5 m depth including sorting out and

100 stacking of useful materials and disposing off the excavated stuff upto 50 22.22 Cum 262.52

Meter lead.(C) Hard Murrum

Filling available excavated earth (excluding rock) in trenches ,plinth, sides

101 of foundations etc.in layers not exceeding 20cm in depth consolidating 14.31 Cum 133.66

each deposited layer by ramming & watering.

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns on Ground

Providing and laying controlled cement concrete M-200 and curing

103 complete including the cost of form work but excluding the cost of 0.42 Cum 835.84

reinforcement for reinforced concrete work in (C) Coping

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

104 concret as per approved design and including excavation for fixing in 9.40 Rmt 394.59

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

105 Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling 12.13 Sqmtr 704.08

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and creating educational information, learning charts, child-

friendly graphics, alphabet charts, number charts, village scenes, thematic

illustrations, photographs and other approved designs directly on wall

surfaces by hand painting using approved quality weather-resistant

acrylic/emulsion paints of required shades and colours, including surface

preparation, sketching, lettering, artistic work, colouring, finishing

wherever required, and all labour, materials, scaffolding, tools & tackles,

transportation and incidental charges complete as directed by the

Engineer-in-Charge.

Preparing and making Scribble Wall on wall surfaces using approved

green chalk paint finishing, which is suitable for writing and drawing. Cost

include surface preparation, cleaning and smoothening, application of

required primer or base coat when needed and finally applying the

107 approved green chalk paint for making a smooth, durable and uniform 10.80 Sq.m 489.85

writable surface. The above work will include finishing of border, labour,

materials, tools, scaffolding, transportations, etc., all included as per

directions by the Engineer-in-Charge.

Providing and fixing Fabric Finished Pin-Up Board of approved quality

and size with fabric covered soft board/cork board surface mounted on

suitable backing material and frame, including necessary base fittings,

screws, fixtures, supports and all accessories required for complete

installation as per approved drawing and specifications. The rate shall

include all materials, labour, tools & tackles, transportation and incidental

charges complete as directed by Engineer-in-Charge.

Providing and fixing Child Height Measuring Scale / Growth Chart of

approved quality having measuring range of approximately 0.30 m to

m or as approved, made from durable printed P.V.C./sunboard or

equivalent market available material with clear graduation markings in

centimetres and child-friendly graphics, having smooth finished edges and

complete with necessary fixing arrangements, screws, adhesive and

accessories including all materials, labour, transportation and incidental

charges complete as directed by Engineer-in-Charge."

Providing, supplying, installing, testing and commissioning LED Display

Screen of approved make/brand having minimum 32 inch screen size or

as approved, Full HD (1920 × 1080) resolution, LED display technology

with inbuilt speakers, HDMI and USB connectivity, wall mounting

110 arrangement with necessary brackets, power cable, remote control and all 3.00 Each 13635.00

accessories required for complete installation and proper functioning

including transportation, labour, testing and commissioning complete as

directed by Engineer-in-Charge.

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump

111 capacity 80 psi, mention with 40 psi inline type post carbon filter auto low 3.00 Each 13053.24

& high pressure switches with following size of storage tank & LPH

capacity & erected as directed

[A] 10 Ltr / Hr with 7 Ltr StorageTank

Construction of New Aganwadi Building at Various Village, Taluka: Savli, Dist: Vadodara. (Pkg-51

Latiyapura, Aankaliya, Dungarpura Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Forty Lakh Fifty Thousund One Houndred Sixteen & Forty Nine Paisa Only

(A) Total Tendered Amount Rs. _________________________

(B) Rebate on Tendered Amount (if any) _______% (in Figures) Rs. _________________________

(C) Net Tendered Amount (A – B) Rs. _________________________

(* Please strike out whichever is not applicable).

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for

work under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building and other Construction

worker's welfare cess Act - 1996 (Labour & Employment Department Letter No. CWA - 2004 - 1831 - M (3). Dt. 9-12-

05, Notification of Labour & Employment Department Dtd. 03-01-05 and Labour & Employment Department letter No.

6. Credit of dismantled materials of amount of Rs.2500 must be recovered from Contractor's first R.A Bill.

7. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 /

61 / S, Dt. 27/11/2008 attached with tender papers.

8 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/24/S dated 05.03.2011

with details specifications and details of works and amount involved at site at his own cost as directed by Engineer-in-

9 Testing of material shall be done as per statement attached with specification. The material should be tested in GERI or

Private laboratory approved by Govt. of Gujarat. Bill for testing charges should be paid by Executive Engineer and 1%

of Estimated cost computed after deducting the cost of materials to be supplied by the Govt. and shall be recovered

from the contractor's running bill as per Govt., R&B Department No. TNC-1085/(4)/C Dtd 20-12-91.

10 In all R.C.C. items in rate analysis, standard cement consumption has been taken as per Govt. GR. PRC- 10/ 2017/

Cement Consumption/ 16/ C/ Dt.11-5-2017 as stated in SOR therefore in RCC items where there is a change as per

actual mix design the cost of difference of cement consumption shall be deducted from the rate of original item at the

rate of input rate mentioned in the tender.

11 The Contractor is solely responsible to bare all applicable taxes i.e. GST etc. & department will not entertain any

contractor representation to reimburse any financial burden due to applicable taxes i.e. GST etc.

Dated Signature of Deputy Executive Engineer

the Contractor. Panchayat (R&B) Sub Division