Maintenance of Govt. Farm including construction of training hall and staff quarter and fencing etc. at Siknabari seed farm under Tamulpur Dev. Block in Tamulpur district

Amount

CIVIL WORK

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms. lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil Footing

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : (a).Brick on flat soling. Footing

1 cement : 3 coarse half brick thick in drains including supply of bricks and prepararing the surface complete: (a) Brick on falt soling

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and to layer 12 mm thick cement harener consisting of mix 1:2( 1 cement hardener mis:2 graded stone aggregate 6 mm nominal size) by volumn, hardening compund mixed @ 2 litre per 50 kg of cement or as per manufecture's specification. The included cost of cement slurry, but excluding the cost of noising of steps etc. complete Floor

Steel reinforcement for R... Work inluding straintening, leaning utting and bending to proper shape planing in position and binding up to plinth level 5.22.6. utting TMT and bar Fe500D more. Mild steel and medium Tensile steel bars, Footing, Column, Stirrips, T beam, stirrups

Steel reinforcement for R.C.C. work including straightening, cutting„ bending plbCing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Trcatcd bars of grade Fc-50()L) or more, Column, Stirrups, Colmn, Stirrups, lintle, stirrups top beam, stirrups, Chajja, chajja

Centering and shuttering inluding strutting, propping etc end removal of the sarne.,.5.9.I Foundation Footing, bæse of column etc. For mass concrete. Lintels, beams, plinth beams. girders, bressumers and cantilevers Footing. T. beam

Columns, Pillars, Posts & Strut, Colum

Weather shade, Chajjas, corbels etc., including edges Slab

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering. finishing and reinforcernent - All work up to plinth level : 5.13 1 :2:4 (1 cement : 2 coarse sand (zone-111) derived from natural aggegate 20 mm nominal size de rived from natural sources) Footing, Column up to plint, T beam, lintel, Chajja, Beam

Reinforced ccmcnt concrete work in walls (any thickncss), including attached pilasters, botttrsses, plinth and string courses, fillets. columns, pillars, piers, abutrnents, posts and struts etc, abovc plinth lcvcl up to floor five lcvcl, excluding cost ofccntcring, shuttering, finishing and reinforcement. 5.2.21:1.5:3 (1 cement: 1.5 coarse sand ( Zone-III) derived from natural sources: 3 graded stone aggregate 20mm nominal sixze derived from natural source) colmn

Brick wrork with common bunt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1 :4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement mortar 1 :4 (1 cement : 4 coarse sand) Ded/door, Ded/ window

15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1 1:4 (1 cement: 4 fine sand) Ded/door, Ded/ window

Finishing wall with water proofing cement paint ofapproved brand and manufacture of 12/13.44 required shade. 13.44.1.New work (Two or More coat@ 3.84 Kg/10m2

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash faseners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) 9.1.3 Kiln seasoned and chemically treated hollock wood Door

Providing and fixing double glazed hennctically scaled glazing in aluminium windows, ventilators and partition etc. vyith 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge completed

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 150 x10mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 100 x 58 x1.90 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 150 x10mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 150 x10mm

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction but welded tubes

Providing corrugated G.S. sheet roofing including vcrtical / curved surface fixed with polymer cotted J or L hooks, bolts and nuts 8 mm diameter with bitumen and GI limpet washers or with GI limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complctc (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, raftcrs and trusses and including cutting to sizc and shape wherever required. 12 1.3 063 mm thick vroth Zinc coating not less than 275 grn/m2

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed WI h polymer coated J or L hooks, bolts and nuts 8 mm dia (3.1. limpet and bitumen washers complete. 12.4.1 0.80 mm thick with zinc coating not less than 275 gm/m2

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. @ 10KG/Sqm

Providing and fixing plain multipurpose cement board ( High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid) 6 mm thick Cement fiber board as per IS: 14862

Providing work in frames of false ceiling. partition.s etc. saxvn and fixed in position with necessary stainless steel screws etc.Sl wood

SANITARY & PLUMBING FOR DOCTOR'S

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe, 32 mm dia

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 450x350 mm (outer dimensions)

Providing and fixing soil, waste and vent pipes 100 mm dia Sand cast iron S & S pipe as per IS: 1729

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes 100 mm dia pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS3989

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes

20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes

20 mm nominal dia Pipes

Providing and fixing brass bib cock of approved qulity 15 mm nominal bore

Providing and flying brass stop cock of approved quality 15 mm nominal bore

Providing and fixing brass ferrule wit C.I. mouth cover including boring and tapping the main 15 mm nominal bore

15 mm nominal bore

Septic Tank

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge All kinds of soil

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Brick work with common burnt clay FPS ( non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in: Cement mortar 1 :3 (1 cement : 3 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall finished with floating coat of neat cement of mix: 1:3 (1 cement: 3 fine sand)

Providing hoisting and fixing above plinth level up to five level precast reinforced cement concrete work in string course, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement with 1:1.5:3 ( 1 cement:1.5 coare sand (Zone-III) derivesd from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources)

Supplying and fixing C.I. cover without frame for manholes: 500 mm diametre C.I cover(Medium duty) the weight of the cover to be less than 58 kg.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S & S pipe as per IS:1729

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes 100mm dia ipe

Construction of RCC stagging

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge All kinds of soil

CEMENT CONCRETE CAST IN SITU)(P.C.C

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Il) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

REINFORCED CEMENT CONCRETE

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Il) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Footing, Column, Tie beam

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources 3 graded stone aggregate 20 mm nominal size derived frorn natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Floor beam, Slab

FORM WORK

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Dry brick pitching half brick in drains including supply of bricks and preparing the surface complete Brick on flat soling

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

White washing with lime to give an even shade New work (Three or more coats)

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two cr more coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

DEEP TUBE WELL

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, alt complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge

Development of tube well in accordance with IS : 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part 1). 150 mm dia

Providing and placing in position filters of 40 mm diameter G.l. pipe with brass strainer cf approved quality

Providing and fixing C.I. Union in G.l. pipe including cutting and threading the pipe andmaking long screws etc. complete( New work) 40mm niminal bore

Providing and fixing Chlorinated Po!yinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including ell plain & brass threaded fittings Ohis includes jointing of pipes & fittings with one solvent cement, trenching, refilling & testing of joints complete as per direction cf Engineer in Charge. 20 mm niminal dia pipes

25 mm niminal dia pipes

40 mm niminal dia pipes

Providing and fixing gun metal non- return valve of orrroved nuality (screwed end) : 40mm nominal bore, Vertical

Kirioskar KS-E-3012 3D}/ - 3 HP 12 stage Water filled borewell pump 302 ft max Head with CPwith CP

Internal electrical works (A Wiring)

Wiring for light/ fan/ call bell point with 2x1.5 sq mm. P.V.C. insulated single core unsheathed industrial ( Multistratd) cable HFFR/ZHFR conforming to IS 694:1990 with flexible bright annealed electroliytic copper conductor for voltage grade up to 1100 volts ( Finolex/ RR kabel/ Nicco of equivalent make as approved by the Deptt.) in recesses conduclt wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 part/ Polycab/ MW or equivalent make as approved by the Deptt.) complete SP upto 3.00 metre lenght

MP up to 6.00 metre length

Wiring to 5 a pin 6 Amps plug point with 1.5 sq mm P.V.C insulated single core unsheathed industrial ( Multistratd) cable HFFR/ZHFR conforming to IS 694:1990 with flexible bright annealed electroliytic copper conductor for voltage grade up to 1100 volts ( Finolex/ RR kabel/ Nicco or equivalent make as approved by the Deptt.) in recesses 2mm thick rigid low halogen SFT PVC IS: 9537 part -III conduit ( Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sqmm cable to third pin of the plug socket etc. as required complete SP upto 3.00 metre lenght

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial ( Multistratd) cable FR conforming to IS-694: 1990 with flexible bright annealed electroliytic copper conductor for voltage grade up to 1100 volts ( Finolex/ RR kabel/ Nicco o Anchor or equivalent make as approved by the Deptt.) in surface/ recesses PVC conduit ( Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the Deptt.) wiring system With 3x 1.5 sqmm cable in 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part_III conduit

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial ( Multistratd) cable FR conforming to IS 694:1990 with flexible bright annealed electroliytic copper conductor for voltage grade up to 1100 volts ( Finolex/ RR kabel/ Nicco/ Anchor or equivalent make as approved by the Deptt.) PVC conduit ( Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm dia 2 mm thick/ heavy ISI marked IS:9537 PART-III rigid PVC conduit wiring system With 2x4 sqmm + earth continuity with 1x2.5 sqmm cable in 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit

B. SWITCH/SOCKET/PLATE ETC

Supplying including installation of socket outlet 10/16/ Amps 3/5 pin combine shuttered complete, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK(BLENZE), SCHNEIDER(ZWNSELO), CRABTREE(MURANO) including making necessary connecion as per direction of department

Supplying including installation of socket outlet 6/10/13/ Amps INTERBATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK(BLENZE), SCHNEIDER (ZWNSELO), CRABTREE(MURANO) including making necessary connecion as per direction of department

Supplying with fitting of 16 amp one way modular clip in switch MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK(BLENZE), SCHNEIDER (ZWNSELO), CRABTREE(MURANO) including making necessary connecion as per direction of department

Supplying including installation of socket outlet 6/10/13/ Amps INTERBATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK(BLENZE), SCHNEIDER (ZWNSELO), CRABTREE(MURANO) including making necessary connecion as per direction of department 4 module

Supplying with fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK(BLENZE), SCHNEIDER (ZWNSELO), CRABTREE(MURANO) including making necessary connecion as per direction of department

C. Fitting & FIXURES

Supplying and fixing of plain pendent holder (Anchor Penta PC CHERRY/ Gold medal/ Kolor kany kom/ Havells or equivalent make as approved by the Deptt) with twin twisted flexible cable connection as approved by the Deptt.) as required without lamp

D. EARTHING

Installation of earth station with 40mm dia and 4.5 mtr. Long GI pipe with necessary GI reducing socket 40 mmx20mm size locking arreangement with hinded cover plate, funnel GI nuts thorough bolls etc. for putting pipe and refitting with necessary enclosure on the top etc. as required

Extra for using salt 5kg and charcoal 64kg for pip earth electrode as required

Supplying and laying with 6 SWG GI earth wire at 0.50mtr. Below ground level or conductor earth electrode includiing soldering excavation work and refitting etc. as required complete

E. CEILING/ EXHAUST FAN

Supplying including fitting fixing of following star rated A-C- Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt-s etc. as required complete and as directed by- the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) nergy efficient 5-star 1200 mm sweep. ORIENT PSPC) / Usha / CROMPTON / Havells/ ATC or equivalent make

Supplying including fitting fixing of following A.G. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department Power flow 225 mm sweep (ORIENT make)

F. MCB/MCBDO/RCCB ETC.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof double door IP-43 surface mounting SPN MCB DB incorporated with bas bar. Neutral link earth bar and din rail etc filled on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved specified and directed by the dept. ABB schneider MG, legrand, Hager make) 12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas bar 125A . Neutral link earth bar and din rail etc filled on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved specified and directed by the dept. ABB schneider MG, legrand, Hager make 4way TPN (4+12) double door

Supplying with fitting and fixing single pole 10KA 240/415V, 50HZ MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. C series G-32A

G. PANEL BOARD

Supplying with fitting and fixing 4P 10KA 240/415V, 50HZ MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. C series( ABB, schneider MG, legrand, Hager(make) 63A

Supply and fitting of 18/20 watt CFL lamp

Providing and fixing ICTP and N. link main switch 60/63 Amp capacity

Boundary Fencinq (considering 15.00m of length with RCC post @3.00m. C/C)

Earth work in excaration by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10sqm on plan) including dressing of sides and ramming of bottoms. lift opto 1.5 m including getting out the excav ated 8011 and disposal of surplus excavated soil as directed, within a lead of 50 m All kind of soil

Dry brick on cdgc flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand. with common burnt clay non modular bricks. Column FOOTING

Providing and laying in position cement concrete of spccificd grade excluding thc cost of centering and shuttering - All work upto plinth level Cement : 3 coarse sand (zone-111) : 6 graded stone aggregate 20 mm Column Footing

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth lcvel 5.22.6 Thermo-Mechanicaliy Treatcd bars of grade Fe-5QQD or more Tie beam, Column Jali

Steel reinforcement for R.C.C. Work including straightening, cutting bending, placing in position and binding all complete above plinth level 5,22A 6 A Thcrmo- \ Techanicaily Treated bars of grade Fc- 5001/ or more

Steel reinforcement for R C.C. work including straightcnjng, cutting, bencling, placing 5.22 in position and binding all completc above plinth level Mild steel and Medium Tensile steel bars

Centering and shuttcring including strutting, propping ctc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels. beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick.

Reinforced cemcet concrete work in waiis (any thickness), including attached pilasters. buttresses, plinth and string courses. fillet.s, columns. pillars. piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and Reinforcement (1 cement : 1.5 coarsc sand(zonc-lll) derived from natural sources 3 graded stoncecaggregate 20 mm nominal size derived from natural sources)

Reinforced ccment conrete work in beams. suspended floors, roofs having slope up to 150 landings, balconies, shelves, chajjas, Iintels, bands, plain window sills, staircascs and spiral stair cases above plinth Ievel up to Floor five Ievel, excluding thc cost of centering, shuttering, finishing and reinforcement with 1:1 5.3 (1 cement : 1.5 coarsc sand(zone-lll) derived from natural sources : 3 graded stonce aggregatc 20 mm nominal size derivce from natural sources)

Brick work with common burnt Clay modular bricks of class designation 75 in foundation and plinth in Cement mortr 1:4( 1 cement : 4 coarse sand)

12 mm cement plaster of mix 1:4( 1 cement : 4 coarse sand fine )

15 mm cement plaster on the rough side of single or half brick wall of mix. In cement mortar 1:4

Supplying at site Anglo iron post & strut of required size including bottom to be Split and bcnt at right angle in opposite direction for 10 cm Ienght and drilling hole upto 10mm dia etc. complete

Fencing with angle iron post placcd at requircd distance embedded in cement concrete blocks every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal nos and two diagonals interwoven with horizontal wires. of barbed wire weighing 9.38 kg por 100 m (minimum), between the two posts fitted and fixed with G.l. Staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total Iength of harbed wire used. 16 18.1 With G.l. barbed wire

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall syrface. Water thinnable cement primer

Finishing walls with water proofing cement paint of required shade more coats applied @ 3.84 kg/ 10sqm)

Providing signboard etc.

Construction of Iron Gate with side post

(A) Civil Works Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drain (not exceeding 1.5m in widdth or 10 sq.mm on plan). including dressing of sides and ramming of bottoms lift upto 2m.....,.., within a lead of 50m. 2.8.1: All kinds of soil:

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level . (a) Brick on flat soling.

PCC'.providing and laying in positing cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 4.1.5: 1:3:6 (1 Cement: 3Coarse sand (Zone-Il) derived from natural sources: 6 graded stone aggregate 20mm nominal size.

Steel reinforcement for R.C,C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6: Thermo-Mechanically Treated bars. 16mm dia:

Shuttering: Centering and shuttering including strutting, propping etc. and removal of form for Foundation, footing, bases of column etc. mass concrete.

Column, pillars piers, abutments post and struts. POST

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

R.C.C: Providing and laying in positing specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement All work upto plinth level. Column, Tie beam

Reinforcement cement concrete in walls (anythickness) including attached pilasters, buttreses plinth and string courses........,. column, pillars .... etc. above plinth level upto first floor level. in above PL to FF level, Column

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2: Fixed to opening / wooden frames with rawl plugs screw etc. 40 x 40 Hollow section: 20 x20x square bar, 20 Gauge M.S. plate

15mm thick cement plaster in single coat on rough side of single or half brick wall for interior platering etc,

Finishing wall with water proofing cement paint of approved brand and manufacture of required shades 13.44.1 new work (Two or more coat @ 3.84 kg/ 10m2)

Nabajit Kumar Brahma

ANIL BORO