REPAIR OF PATH DRAIN AND OTHER MISC WORK ALONG LEHL MARG UNDER GE S BINNAGURI

Amount

Demolition of cement concrete(Reinforced) of any description in any position not otherwise specifically provided complete all as specified.

Demolition of precast concrete block/brick walling built in cement mortar of any description etc complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified.

Demolition of cement concrete(un-Reinforced) of any description in any position complete all as specified.

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified.

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed complete all as specified.

M&L for Endura tiles fo size 300 x 300 x 10 mm set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for providing cement concrete type B-0 (1:2:4)(using 12.5 mm size graded aggregate) in coping set incl weathering, slightly rounded or chamfered angles & thickness complete all as specified.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm garded stone aggregate) as in path/ steps laid/ plinth protection with and incl use and waste of form work and finishing the surface even and rough to receive the topping layer of tiling complete all as specified..

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concerete complete all as specified

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified.

M&L for reinforced cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in slab,landings,balconies,canopies,deck slabs and in shelves complete all as specified..

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L for pre polished coloured chequered cement concrete tiles made with grey cement and pig-ments of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M & L 80 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel complete all as specified.

M&L for brickwork with sub-class 'B' brick, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.

M & L for brick work with sub class B bricks laid on edge on vertical inclined sides of drain, bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified and as directed.

M & L for brick work with sub class B bricks laid flat on vertical inclined sides of drain, bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified and as directed.

M&L for flat. Rough finished surface of concrete,Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L for rendering 15 mm thick cement plaster in cement mortar 1:6 on fair fair faces of brickwork or concrete surfaces complete all as specified.

M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip complete all as specified.

Material and labour applying one coat of weather shield paint complete including prepration of wall, and similar surface etc surface complete all as specified and as directed by Engr-in-charge.

SS SHARMA (BID ID -3153372)

M/S VIRENDRA KUMAR SINGH (BID ID -3153798)

SHRI MANOIRANJAN BISWAS (BID ID -3154130)

R K AGARWAL (BID ID -3153449)

M/s. RAMPHAL GARG (BID ID -3153631)

M/S SHIVNATH SINGH (BID ID -3153516)

Tirupati Construction (BID ID -3153905)