Construction of 06 roomed Additional Accomodation at HSS Rahmoo B.W.O Electric work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ SSK/eq. standard make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha /eq. standard make as desired by engineer incharge.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/SSK/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Leiva /ABB Tvisha /eq. standard make as desired by engineer incharge.)

Wiring for lighting circuits/ 6- 10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha /eq. standard make as desired by engineer incharge.)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP M.C.B, "C" curve including connections, painting etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ SSK/ equivalent as directed by engineer incharge.), single core cable in surface/ recessed medium class PVC conduit as required.

(a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

( c ) 2 X6 sq. mm + 1 X 6 sq. mm earth wire

( d )2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete

Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supply installation testing and commissioning of Indicator of Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena /eq. standard make as desired by engineer incharge.)

Supply installation testing and commissioning of AC/DC Bell including Bell push and battries GM/ standard make

Sub Head-2 - Fixtures and Fittings

Supply installation testing and commissioning of 18 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium body and Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/Helonix/Wipro/ eq. make / sample to be approved before installation..

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan ( USHA/havell /Bajaj/Crompton/equivalent make as directed by engineer incharge,) with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise-75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. the job includes the steel rod of suitable size and length to be installed at site.

Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc /ABB Tivsha/schneider Livia /Havell Coral /eq. standard make as desired by engineer incharge.

Supply installation testing and comm. Of 250mm -300mm sweep exhaust fan Shutter type of havell /USHA/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections.

Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,( legrand/ Shinider/Hager make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

4 way (4 + 18), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,( Havell/ legrand/ Shinider/SSK/ABB /eq. standard make as desired by engineer incharge) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

2 + 12 way, Double door

S/F testing and comm. Of MCB's 10 K of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ ABB ./equivalent make as directed by engineer incharge.

a) 6-32 Amp SP MCB

b) 40-63amp DP MCB

Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter copper bound G.I Earthing electrode , 80mm dia. connecting the plate with main control board by8- 10 SWG copper wire with 1/2" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound.

S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.

c)50 sq.mm 2 core

Earth work excavation for cable trench, 2 ft deep with an average breadth of 1.5ft and refilling of trench with excavated earth after laying of cable and ramming it properly excluding cost of cable.the job also includes laying of warning tape .

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

160 mm dia (OD-160 mm & ID-135 mm nominal)

Supply installation testing and comm. of flood light 100 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton /eq. standard make as desired by engineer incharge. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job.

Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement)

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

Normal INCOMING:

a)125A 2P MCCB 25 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB /eq. standard make as desired by engineer incharge.

b) 2 No. of Aluminium Bus Bar of 200 Amp.

c)Digital meters and phase indicators -1 set.

d) onload Change over switch 63 Amp for generator.Front operated.

e) 2 No. of Aluminium Bus Bar of 100 Amp.

c)Digital meters and phase indicators -1 set.

Inverter Incommer

(a) 100 amp DP MCB 10K Legrand/ Shinider/Semiens/ABB /eq. standard make as desired by engineer incharge.

(b) 100 Amp 2 strip bus bar

c)Digital meters and phase indicators -1 set.

OUTGOING:

c) 40-63amp DP MCB

c) space for 12 way MCB's

Supplying,Installation,Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical

S/I testing and comm. Of single phase 10 KVA 50HZ oil cooled(Transformer oil is to be provided with stabilizer conforming to IS 335,IEC296)) unbalanced type servo voltage stabilizer(A.E / Cosco/Chinar/ Electricfield make) having an input voltage ranging from 90 V to 260 V and balanced output voltage of 215V, +/- 1%. ( Test certificate to be provided by the manufacturer)

Supply, Installation, Testing & Commissioning of 6 KVA single-Phase IN single-Phase out ON Line UPS System to provide backup time of 30 minutes at full load, With In-Built Isolation Transformer of reputed make dully ISI Marked (APC Schineider/ETON/VERTIV/ equivalent standard make ) (Compitable to Genrator Supply having varing frequency) With on line double conversion topology, high frequency techonology, with front LCD,automatic bypass for fault tolerance & complete with required Number, 12 Volts 65 AH SMF VRLA Batteries ( Exide/ Amaron/Quanta /eq. standard make as desired by engineer incharge) with connecting links with angle iron battery stand complete job, complete with battery rack with two year warranty against any manufacturing defect. The job further includes AMC for UPS and batteries for a period of three years with replacement warrenty reckoned from date of sucessfull commissioning.

Supply & Erection of lockable 6 U rack with 5A strip and two fan for distribution, mounting of patch panels, hubs, switches etc,, complete as per specification and as desired by EIC.

Supply & Erection of CAT 6, 24 port Jack panel for termination of CAT6 cable, Testing & certification of the network with Omni/Penta Scanner of each Cable

Supply & Erection of Cat-6, 1Mtr Patch Cords complete as per specification and as desired by EIC.

Supplying, Installation, TestingandCommissioningof 60-65 InchesFull H.D LED Display Monitor of Sony/Samsung /LG or /eq. standard make as desired by engineer incharge

Supplying of 20- 24 Channel Network Video Recorder(NVR) as per the Specifications Enclosed with a Hard Disk Memory of 8 TB capacity.

Supplying, Installation, Testing and Commissioning of 8 Port Layer 2 Managed PoE switch of ISI standard make with wall mounted rack fully loaded of required size complete.ion

Supply, Installation, Testing & Commissioning of Dome/ Bullet Camera IP CCTV Monitoring, Recording & Streaming Systems per the Following Specifications:- Minimum 4 megapixel progressive scan HD CMOS Lens :- 3-6 mm or Better , DC‐Iris/Auto Iris Field of view:-100˚to 45˚ (horizontal) 72-34 ° (vertical) Day/night operation: The camera should provide day/night functionality automatically switches to night mode in low‐light scenes Wide dynamic range:- True WDR 100dB or equivalent or better Minimum illumination /light sensitivity :- Color mode: @0.2 lux black and white mode: @0.03 lux Video compression:- H.265 motion JPEG Resolutions and frame rates (H.265):- At 2304x1728, the frame rate shall be 25 FPS or better for viewing. All the streams shall be user configurable (with respect to resolution, frame rate & compression standard). All the cameras (sensors) shall have minimum 5 streams. PoE:- It should be PoE enabled and with IK08 enclosure and in built 20m IR Certification:- It should be FCC, CE, UL certified ONVIF:- ONVIF 2.0 Support Supported protocol:- DHCP, HTTP, HTTPS, NTP, RTP, RTSP, SMTP, SSL/TLS,TCP/IP, Secure Real Time Transport Protocol (SRTP), all parameters should match asTechnical compliance .STQC Certification is Mandatory. Approved makes:- Bosch/Matrix/CP plus/Pelco/axis/eq. standard make as desired by engineer incharge

Supplying, Laying and Drawing of UPT-4 pair CAT-6 LAN cable drawn partly in existing recessed/surface conduits, partly in xisting recessed/surface mounted raceways and partly in existing cable ducts in modular furniture complete as per specifications and as required. DLink make

Supply & Erection of Media Convertor complete as per specification and as desired by EIC

Supply, installation, testing and commissioning of 75 inch 4K Ultra HD Interactive Flat panel Digital Board/ smart Board with OPS facility best for teaching screen, Display resolution Max. 3840x2160, anti glareglass, Multi touch screen, Stylus Dock, bluetooth, WIFI, USB, Ethernet, HDMI facility. samsung/Panasonic/LG make ( 3 years onsite warranty)

Supply, Installation, Testing and Commissioning of 24 port Networking switck (Dlink//eq. standard make as desired by engineer incharge)

Supply, Installation, Testing and Commissioning of RJ 45 Data outlets with single back box of 27 Dlink/Legrend/siemens /eq. standard make as desired by engineer incharge with making of necessary connections through networing engineer and as required at site