REPAIR MAINTENANCE OF FLOORING TILING AND PERIODICAL SERVICES OF AC PLANTS IN ARMY AREA JODHPUR UNDER GE A UTILITY

Amount

Demolition of stone masonary of any description and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

M&L squared rubble walling Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed.

M&L squared rubble walling Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar (1:6) but except stone complete all as specified and directed.

Extra over hammer dressing to face stone with maximum depression on face from straight edge not exc 20mm and dressing face bed and joints as specified to squared rubble walling jodhpur type brought upto cources as directed

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L raised pointing mason's joint as per Fig-05 of section-14 of SSR-Part-I-2009 to square rubble masonry Jodhpur type regular course in CM 1:4 all as specified.

M&L applying two coats of cement base paint over a coat of primer on walls including preparation of newly plastered/ pointed surface complete all as specified and directed.

Roughning sufaces of old concrete floor by picking , sweeping cleaning and washing down with water to remove dust etc.

S&F 5 cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, & in plinth protection templates, etc n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4. complete all as specifed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc.complete all as specified and directed.

M&L 75 mm thick PCC , (1:4:8) type D-2, (using 40mm graded stone aggregate) as in sub base for floor complete all as specified and directed.

M&L 60 mm thick, machine made M-35 grade ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , of triangular / Zigzag / Haxagone/ I , in shape or shap and designe as approved, with grey cement and pigment , having crushing strength not less than 300 Kg / Sqcm and conforming to IS specifications , laid over and including a layer of 25 mm thick sand cushion (Tibba sand) including filling the joints with sand , as in floors/ paths/ pavings etc, complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L Rubbersied Chequered cement concrete tiles 25cmx25cmx25 mm thick, set jointed and pointed in neat cement slurry with grey cement and with pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match and pointed in white or coloured cement to match the colour of tile complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tile colour laid over and including 10 mm thick screed / rendering in CM (1:4) complete all as specified and directed.

M&L non skid coloured ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L non skid coloured ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,as in skirting fixed over and including 10 mm thick cement back coat in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L machine cut Kota stone slab 20 mm to 25 mm thick , as in flooring with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed.

M&L machine cut kota stone slab 20-25 mm thick as in riser / steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

Dismantling water tanks of any description in any position exceeding 250 & not exceeding 500 lit capacity complete all as specified and directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed/fixed to pipes/ferrules .

S&F as in repair vitreous china squatting pan, Orissa pattern, size 580mm x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonege pipe etc complete including taking down existing WC & fixed new WC in repair including making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S&F as in repair Vitreous China, wash down water closet pan "Pedestal pattern" white including connection to drain and to flush pipe and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.

S&F as in repair PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S & F as in repair vitreous china wash basin,white flat back , size 550mm x 450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F as in repair bib tap, cast copper alloy, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore dia. complete all as specified and directed.

S&F as in repair Stop valves , ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S&F as in repair grating doom 100 mm dia of PTMT Min wt 25 grams etc.

S&F as in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal as per sample kept in GE's office.

S&F as in repair purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia as per sample as in repairs kept in GE's office.

S&F as in repair of decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample kept in GE's office.

Taking down existing chowkats or frames of any description and in any position exceeding 1.50 sqm but not exceeding 4 sqm each with shutter (without taking off shutter from the frames) complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position not exceeding 1.50 sqm each with shutter (without taking off shutter from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each.

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels commenrcialface on bath sides with lipping/frame to match with and including one shop coat of pink primer complete all as specified and directed.

S&F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and including with one shop coat of pink primer complete all as specified and directed.

M&L preparation of new wooden surfaces and apply two coats of synthetic enamel paint over 10 cm in width or girth of surfaces complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of wood grain printed PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron ) aluminium frame for doors , windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings & specified & directed. Note: 1. Glass shall be measured and paid for separately. 2. For payment pupose wight of gasket/rubber beading shall not be taken in to account. Further weight of screw/nail shall also not to be considered but cost of these items are included in the unit rate of this item.

S&F as in repair hydraulic door closer aluminum body fixed in repair design No 3 universal type, suitable for door shutter all as specified and directed.

S&F powder coated aluminium grill of design No DG-104 7.5mm thick of decogrill or equivelent approved make with 1 mm thick 'F' sections of suitable size all as directed.

S&F aluminium alloyl wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, etc complete all as specified and directed

S&F 4 levers brass mortice lock, vertical type, size 100 mm complete all as specified.

M&L mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as specified( Fe-410-O or 310-O) complete all as specified and directed. Gde-E-165

S&F butt hinges 100 mm, medium weight, cold rolled, mild steel complete all as specified and directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.

S&F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified.

S&F 200 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as directed.

Taking down steel windows/ ventilators and making good & sorting of materials complete all as specified.

S&F factory made box type steel window with box type hinges & 02 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded with and including preparation of new steel surfaces and including one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed) and as shown in Drg No CEJZ/TD/20 Sheet 1/3 to /3.

S&F factory made box type steel window with box type hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded with and including preparation of new steel surfaces and aincluding one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed) and as shown in Drg No CEJZ/TD/20 Sheet 1/3 to 3/3.

S&F factory made box type steel ventilator with glazing bars dovetailed or welded with and including preparation of new steel surfaces and including one shop coat of zinc chromate primer complete all as specified and as shown in Drg No CEJZ/TD/24 Sheet 1/3 to 3/3.

S&F factory made box type steel ventilator without glazing bars dovetailed or welded with and including preparation of new steel surfaces and including one shop coat of zinc chromate primer complete all as specified and as shown in Drg No CEJZ/TD/24 Sheet 1/3 to 3/3.

Supply and fabrication of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L preparation of new steel surfaces and apply two coats of synthetic enamel paint over 10 cm in width or girth of surfaces complete all as specified and directed.

M&L preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm in width or girth of surfaces complete all as specified and directed.

Taking down existing wire mesh of any discription and in any position and supplying and fixing Stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beads etc complete all as specified and directed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beads etc complete all as specified and directed

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in CM (1:4) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar on fair faces ofstone masonry surfaces or surface other than fair face of brick-work surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement including taking down existing cement plaster of any description and in any position and racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

Supply only water proofing compound all as specified and directed.

M&L preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L preparation of the newly plastered surfaces of walls & applying three coat of white wash on wall surfaces complete all as specified and directed.

M&L preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash , complete all as specified and directed.

M&L preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of cement base paint including watering and curing of surface adeqautely before and after application of cement base paint complete all as specified and directed.

M&L preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.

M&L preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Taking down eaves gutters and rain water pipes (any size of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

S&F 200 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls including MS clamps all as required complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls including MS clamps all as required complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls including MS clamps all as required complete all as specified and directed

S&F PVC (SWR) bends, 200 mm bore, any radius complete all as specified and directed.

S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

Taking up or down steel tubing and connection of 15 mm bore tube of any description & in any position complete all as specified and directed.

All as per Item No 93.00 as above but 20 mm bore tubing.

S&F 15 mm dia (nominal) GI tubing medium weight with all fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed

S&F 20 GI tubing medium weight with all fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed

M&L as in repair 18-20 mm thick Black granite stone as in (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc and rounding of the edges of stone slabs as required complete all as directed.

Dismantling of RCC posts or struts of any section incl. taking out embedded portion and making good of disturbed ground (posts embedded in natural ground) etc complete all as specified. Note : Unit rate of this item includes the cost of exacavtion and earth work.

All as per item No 98.00 as above but posts embedded in concrete.

Dismantling chain link fencing of any type fixed in any situation including flat iron MS round bars, mounted on nuts & bolts etc complete all as specified.

M&L PCC 1:4:8 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Supply only, chain link fencing of MS galvanized fencing, of mesh size 50mm x 50mm and dia of wire 3.00 mm complete all as specified & directed. Note : Weight of chain link shall be determined by board to be detailed by GE.

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 10cm but n.exc 20cm long and dia of neck 11 to 15mm.

M&L as in repair Mild steel round bars, 10mm dia cut to length weared and securing chain link fencing to fencing posts, complete all as specified and as directed

S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing and tying at crossings with and provisions of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured).

S&F precast cement concrete 1:2:4 as in copings.posts, boundary pillars, (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:6 complete with joints to match

M&L precast cement concrete louvres and jallies, 25mm thick (measured solid) Type B0 (1:2:4) 12.5mm graded aggregate set in CM 1:6, including all mouldings but excluding frame complete all as specified and directed

S&F as in repair tubular towel rail of brass chromium plated , 20 mm dia, D type, 60 cm long betweem flanges complete all as specified and directed.

Demolition of cement concrete padding of water proofing treatment from roof etc overall thickness n exc 200mm and taking down of existing damaged/loosened cement concrete/brick tiles from roof/terrace including taking down of existing APP membrance if any , cleaning with water and removal of debris to outside MD land complete all as specified & as directed.

M&L rendering 15mm thick CM 1:4 shall be provided mixed with WPC @3% by weight of cement at green concrete complete all as specified & as directed Note : WPC shall be measured and paid separately as supply only.

M&L preparation of plastered surface of roof slab by throughly wire brushing , washed,dried up cleaned all foreign matter and dust and apply one coat of approved bituminous primer @ 0.40 ltr per sqm complete all as specified and directed complete.

M&L for 3mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method over primed surface of roof slab. Note : For payment purpose overlap shall not be taken in to account and net covered area shall be considered for making payment.

M&L 40 mm thick PCC (1:2:4) type B-0 (10mm graded stone aggregate) using integral WPC as per manufacturer instructions, well compacted with "V" shaped groove of 10mm deep with mastic bitumen. Size of PCC panel with groove shall not exceeding 0.40 sqm.

M&L writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified.

M&L as in repair factory made precast machine pressed kerb stones of PCC grade Type B-1 (1:2:4 ) using 20 mm graded aagregate and of shape and size as directed, set jointed and pointed CM (1:4) and including necessary excavation and earth work and making good the disturb surfaces to match with the exixting surfaces including removal and disposal of rubbish complete all as specified and directed.

M&L preparation of new plastered or unplastered or concrete surfaces and applying two coat of plastic emulsion paint over a primimg paints plaster coat of any colour complete all as specified & directed at site.

S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete; gear operated type with chain wheel & hand chain Thickness of laths 1.25 mm

Taking out the existing steel rolling shutter and refixing of rolling shutter and after replacement of ball bearing, anchoring rod and stop cover including lubrication as required and erected in position as indicated, complete all as specified & directed.

S&F Saftey lever locks mild steel with 4 leavers for rolling shutters

Rajesh Enterprises

Siddhi Vinayak and Co

Panwar Electricals