M/o Building (Maintenance of Staff Quarter Block Pocket F-64, C-12 in Sector-40) Noida

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 2018/I.No. 15.56/P-253

12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) (DSR-18/I-13.4.1/P-222)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undercorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials labour Tools & plants etc required for proper completion of the work.SOR I.NO. 15.09 649

Rough cast plaster upto 10 m helght above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dathed over and Including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. DSR-18/ I.No: 14.72

Painting with synthetic enamel paint of approved brand and manufacture of required to colour to give an even shade. Two or more coat on new work. (DSR 2018 I.No. 13.61.1/P-227)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 13/I.No. 9.21.1/P-

Providing and laying integral cement based water proofing treatment including prepration of surface as required for treatment of roofs balconies terraces etc consisting of following operations with average thickness of 120 mm and minimum thickness at khurra as 65 mm 22.7.1

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR 18/I.No. 10.25.2./P-