Maintenance work of HT/LT line and TC network for Khergam Sub-Division for various schemes in various Feeder under Valsad-Rural Division.

Sr. Item Code Details of Works Unit Qty. Rate Amount

9924000001 Cutting of Tree branches

1 Per Tree 57/-

surrounding HT/LT line

9924000060 Dismantling & removing of

2 service line from pole & No. 111/-

crediting to S/dn (1 ph.)

9924000061 Dismantling & removing of

3 service line from pole & No. 205/-

crediting to S/dn (3 ph.)

Total of schedule - B2

Total of schedule B1 & B2

(+)_______%Above, (-)_______%Below, Rate to Rate…..

Net Total of Schedule ‘B1 & B2:

Amount in Words: (Five Lacs Only)

1. Whatever Steel Material removed after replacement should be credited to Store.

2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.

3. Contractor has to carry out work under Khergam Sub-Division under Valsad-Rural

4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary

accessories to the contractor.

5. The rates are inclusive of dismantling charges of existing bare conductor and crediting in to

store & dismantling of service lines from LT bare conductor and to provide service

connections on ABC by insulated pierce connectors through service connection box.

6. The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantle material to the DGVCL store at their cost.

7. DGVCL will provide key material like M.S. materials, ABC/Bare conductors, PSC/RSJ Poles,

Insulators, Fabricated materials etc. to the contractor.

8. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods

confirming to the relevant ISI specification and as directed by Engineer in charge.

9. Necessary electricity connection for fabricated items shall be provided by DGVCL on payment

of required charge for connection & electricity bill of the same shall be paid by the agency.

10. All the rates are inclusive of PF and Exclusive of GST applicable time to time.

11. All steel material is to be painted as below:

a. Scrubbing of rusted surface properly before applying the paints on to the RSJ poles

& steel fabricated materials of RSJ/PSC poles is must require.

b. Two coats of approved ISI mark red oxide (primer) is to be properly painted for

the RSJ poles & steel fabricated materials of RSJ/PSC poles.

c. Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality

silver paint) are to be properly painted on to the RSJ poles & steel fabricated materials

of RSJ/PSC poles.

Executive Engineer (O&M)

Valsad Rural Division.