Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 CrAccepted-AOC | ₹25.8 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹25.8 CrRejected-Finance | ₹25.8 Cr | L2 | Rejected-Finance Rejected due to L2 |
| 3 | L3₹26.3 CrRejected-Finance SHREE SHYAM SADAN 10 2 PARAS SOCIETY PANCHVATI JAMNAGAR GUJARAT 361008 | JAMNAGAR | GUJARAT | 361008 | ₹26.3 Cr | L3 | Rejected-Finance Rejected due to L3 |
| 4 | L4₹26.4 CrRejected-Finance | ₹26.4 Cr | L4 | Rejected-Finance Rejected due to L4 |
| 5 | L5₹27.3 CrRejected-Finance JODHPUR ROAD UTARLAI BARMER RAJ 344035 | BARMER | RAJASTHAN | 344035 | ₹27.3 Cr | L5 | Rejected-Finance Rejected due to L5 |
Tender Value
₹24 Cr
EMD Value
₹15 L
Closing Date
6 Sept 2023, 6:00 pmClosed
CE Jodhpur Zone
HQ CE Jodhpur Zone
PROVN OF OTM ACCN FOR AD REGT WKSP AT JAMNAGAR MIL STATION (JOB NO. AMWP 2021-22 LIST IV /SER NO 11)
2023_MES_596587_2
800571/E8
Open Tender
Civil Works
750 days
GE (A) Jamnagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹3,000
GE (A) Jamnagar
₹15 L
Yes
22 Sept 2023
9 Aug 2023
8 Sept 2023
9 Aug 2023
6 Sept 2023
23 Aug 2023
Amount
Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27
Lump sum price worked out by the contractor for "SITE CLEARANCE EXCAVATION & EARTH WORK " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28
Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29
Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 32
Lump sum price worked out by the contractor for "ROAD" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34
Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36
Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 37
Lump sum price worked out by the contractor for "PCC PATH / HARDSTANDING" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38
Lump sum price worked out by the contractor for "COMPOUND WALL FENCING & GATE" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41
Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42
Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 45
Lump sum price worked out by the contractor for "SOLAR HOT WATER HEATER" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 46
Lump sum price worked out by the contractor for "LIGHTING PROTECTION" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 47
Lump sum price worked out by the contractor for "FIRE ALARM SYSTEM & HYDRANTS" as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 49
Sch 'A' PART-XV (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.
EARTHWORK & EXCAVATION M&L for filling with approved earth brought from outside defence land including necessary excavation, transportation and payment of royalty etc., spreading and levelling in layers n exc. 25 cm thick, well rolling, consolidation complete all as specified and as directed.
INTERNAL WATER SUPPLY S&F of 15 mm bore CP brass bib cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or techno commercial equivalent makes as per Appx 'C'.
S&F of 15 mm bore CP brass angular stop cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or techno commercial equivalent makes as per Appx 'C'.
S&F of CP wall mixer 2 in 1 system with central spout and connection for over head overhead shower of size 150x150 mm with W.F. ISI marked complete all as specified and directed. Make - Jaquar ESSCO SERIES or techno commercial equivalent makes as per Appx 'C'.
S& F overhead shower 100mm dia of ABS body crome plated with gray face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar ESSCO SERIES or techno commercial equivalent makes as per Appx 'C'.
S&F jet spray system chromium plated steel body with flexible pipe complete all as specified and directed. Make - Jaquar ESSCO SERIES or techno commercial equivalent makes as per Appx 'C'.
S&F two way angle cock CP fancy type 15 mm bore complete all as specified and directed. Make - Jaquar ESSCO SERIES or techno commercial equivalent makes as per Appx 'C'.
INTERNAL ELECTRIFICATION S&F decorative box type LED tube light fitting 1x20 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with three core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Cat part no- LTT8-20 for LED tube and DMLN1LT8-16 for batten of Crompton or techno commercial equivalent makes as per Appx 'C'.
S&F mirror light fitting 10 W surface / wall mounted decorative type LED batten capable of delivering 1000 lumen, having PC diffuser, luminous efficacy of > 120 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, free of glare independent isolated SMPS based constant current electronic LED driver with THD < 15%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 120- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.
S&F round shape 12 watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers holder LED lamp suitable for roof ceiling including connecting up with three core flexible capper conductor complete all as specified and directed.
S&F vertical triple pole & neutral double door DB 4 way, metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with incoming MCCB 4 poles 125 Amps, 16 KA copper busbar for each phase, two fully insulated & shrouded neutral bars, two earthbars, cable ties for cable management, prefitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed.
S&F heavy duty, exhaust fans of 300 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLSH cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: VENTILUS of Crompton or techno commercial equivalent makes as per Appx 'C'.
S&F ceiling fans, 230 vOLTS, 1200mm sweep with main air delivery 210 CFM, service value of the fan shall be greater than 6.1 (5 star rated) as per BIS with blade, down rod & other necessary accessories with bushless direct current motor (BLDC) without remote system and connecting up with three core twisted flexible copper conductor cable of 1.0 sqmm with multistranded copper conductors from ceiling rose to fan complete all as specified and directed.
S&F energy saving 9 Watt LED bulb complete all as specified and directed.
S&F T.V./Telephone Socket Outlet, including M.S. Box of size 100x100x65 mm with cover plate complete all as specified and directed
S&F energy saving environment friendly highbay LED light fitting of 80 watt with IP 65 luminaire with high efficiency complete all as specified and directed.
M&L for sub main wiring with five runs of 10.0 Sqmm size main cable and one run of 10.0 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLSH cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified and as directed
M&L for sub main wiring with tree runs of 6.0 Sqmm size main cable and one run of 6.0 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLSH cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified and as directed
M&L for sub main wiring with three runs of 4.0 Sqmm size main cable and one run of 4.0 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLSH cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified and as directed
S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.0 SQMM fixed with & copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 25mm bore light grade, 1.2 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed. Cat No: LSTS-30-CDL of Crompton or techno commercial equivalent makes as per Appx 'C'.
Note for item No 23.00, 24.00,25.00,29.00, 35.00 & 66.00: (1) The LED lights shall have guarantee for 5 Years from date of completion of contract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.
M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia medium grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete all as specified and directed.
NOTE FOR ITEM NO. 36.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i] Excavation & earth work in any type of soil including removing of surplus material upto 50 Mtr. [ii] PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii] Main earthing lead from earth electrode to test point upto 7.5 mtr. [iv] Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v] GI protection pipe of size 15 mm bore medium grade 7.5 mtr.
S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral, double door, 6 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc., complete all as specified and directed.
ROAD, PATH AND CULVERT M&L for 150 mm thick WMM (Wet Mix Macadam) (compacted thickness) laid in two layers of 75mm thick each conforming to grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanical means & rolled by using 8-10 ton vibrator power roller over compacted sub grade surface of soling as specified in clause 406 3.5 of MORTH specification and necessary lateral support and formwork if required complete all as specified and directed.
S&F Cat eye reflective type of body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS Stud of suitable size as per manufacturer instructions complete all as specified and directed.
SEWAGE DISPOSAL S&F DWCPE (SN8) pipes nominal dia 163mm ID (180 O/D) laid in trenches for sewer network fixed jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions including Concrete bed cement concrete (1:4:8) type D-2 and packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed
S&F DWCPE (SN8) pipes nominal dia 163mm ID (180 O/D) laid in trenches for sewer network fixed jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions complete all as specified and as directed
S&F DWCPE (SN8) pipes nominal dia 200 mm ID laid in trenches for sewer network fixed jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions including Concrete bed cement concrete (1:4:8) type D-2 and packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed
S&F DWCPE (SN8) pipes nominal dia 200 mm ID laid in trenches for sewer network fixed jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions complete all as specified and as directed
(PCC PATH / HARDSTANDING) M&L for Providing and laying 100 mm thick factory made chamfered edge cement concrete paver block of M-50 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
EXTERNAL WATER SUPPLY Supply and laying DI (Ductile iron) pipes of size 100 mm dia with spigot and socket ends with tyton joint S/S class K-7, in any length, laid in trenches including testing on completion complete all as specified and directed. Note:- Ductile Iron Specials/Fittings, excavation and earth work shall be measured and paid separately.
Supply and laying DI (Ductile iron) pipes of size 150 mm dia with spigot and socket ends with tyton joint S/S class K-7, in any length, laid in trenches including testing on completion complete all as specified and directed. Note:- Ductile Iron Specials/Fittings, excavation and earth work shall be measured and paid separately.
Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 150 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers etc all as specified and directed.
Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 100 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers etc all as specified and directed.
Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 80 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers etc complete all as specified and directed.
Supplying, fixing and testing of DI pipe fittings for spigot socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing/ decreasing or double socket etc). Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs, for pipe complete all as specified and directed. Note:- 1. Excavation and earthwork shall be measured and paid separately. 2. Unit rates includes for all jointing and jointing materials.
M&L for construction of brick masonry new valve pit chamber, 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate providing well burnt brick masonry wall of 23mm thick built in CM 1:6 rendering in cement 1:6 finished even smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even supply and fix 3.15 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle iron frame embedded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25 x 6mm flat iron applying two coats of synthetic enamel paint of approved shade over a coat of primer (Red Oxide) to all exposed surface making good all disturbed surface to match surrounding complete all as specified and directed of following sizes:-
900mmx900mmx900mm (internal size )
750mmx750mmx750mm (internal size )
Supply and fix of submersible pump 7.5 HP , 3 phase , 415 volt , 50 HZ complete all as specified and directed.
M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 250mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.
S&F submersible cable PVC insulated and sheathed multistranded copper conductor flat water proof suitable for submersible pump sets 3 core 6 Sqmm complete all as specified and directed.
S & F of Fully automatic water level controller and indicator with up and down tank sensor complete all as specified and directed .
S & F of Water level indicator cable cat 6 heavy gauge for water level controller complete all as specified and directed.
Diesel Engine Generating set 415 volts 10 KVA 3 -phase 0.8 power factor 50 Hz, 1500 RPM self excited self regulated brushless AC generator installed including acoustic enclosure suitable for ambient at Jamnagar and confirming to condition under Alternator IS 4722/BS 5000 , Engine BS 5514 /ISO 3046 DG set ISO 8728 complete with all fittings and accessories as follows:- NOTE (58.01 to 58.06):- (i) The capacity of Generator set shall be net after all due derating factors as per relevant ISI standard.
D. Acoustic enclosure: Enclosure is free standing floor mounted factory built and modular in construction to facilitate easy assembly at work site and will be drop over housing type. It will consist of acoustically treated panel housed in sheet steel will provide easy access for maintenance, repairs and operation. The enclosure is custom built to suit conditions, with the following features:- (i) Custom built product for various equipment's, with ensure the optimum performance without duration. (ii) Rugged in construction maintenance free and modular designs which facilitate easy at site (iii) 16 SWG (1.6 mm) thick CRCA sheets to be used for enclosure panel to ensure longer life against weathering action. High quality acoustic insulation materials to be used as per IS 8183 for maximum sound absorption. Acoustic layers are supported by perforated sheets (iv) Sheet metal components of the enclosure should undergo various stages of surface treatment prior to painting which leads to be better life of the enclosure against weathering action. (v) Special paint treatment with pure polyester powder / epoxy to be provided for better weather resistance. (vi) For effective acoustic / weather sealing a special type weather sealing gaskets, new frame rubber gaskets to used. (vii) Working space is to be provided around the equipment for easy maintenance / repairs. (viii) Necessary cut out provision for entry and exist of fuel lines cable to be incorporated in the enclosure as per the requirement. (ix) A see through transparent window ( glass or acrylic) in front of engine panel to provided for monitoring the operation. (x) Ducting if required, bellows, mechanical hardware like locks, hinges fasteners etc to be provided (xi) Deliverables. 75 DBA @ 1mtr at 75% load under free field conditions. The temp inside the enclosure will be within as per manufacturers recommendations above ambient temp. (xii) The enclosure should be provided with bulk head light fitting for inside illumination (xiii) The batteries should be placed inside the enclosure beside the DG set on a suitable insulated plat form. (xiv) the DG set should be provided with external Emergency stop push bottom. (xv) The acoustic enclosure parts shall be of powder coated after pre treat ment process. The powder coating shade should be Genset Green. The base frame should be painted with epoxy based black shade.
D. Acoustic enclosure: Enclosure is free standing floor mounted factory built and modular in construction to facilitate easy assembly at work site and will be drop over housing type. It will consist of acoustically treated panel housed in sheet steel will provide easy access for maintenance, repairs and operation. The enclosure is custom built to suit conditions, with the following features:- (i) Custom built product for various equipment's, with ensure the optimum performance without duration. (ii) Rugged in construction maintenance free and modular designs which facilitate easy at site (iii) 16 SWG (1.6 mm) thick CRCA sheets to be used for enclosure panel to ensure longer life against weathering action. High quality acoustic insulation materials to be used as per IS 8183 for maximum sound absorption. Acoustic layers are supported by perforated sheets (iv) Sheet metal components of the enclosure should undergo various stages of surface treatment prior to painting which leads to be better life of the enclosure against weathering action. (v) Special paint treatment with pure polyester powder / epoxy to be provided for better weather resistance. (vi) For effective acoustic / weather sealing a special type weather sealing gaskets, new frame rubber gaskets to used. (vii) Working space is to be provided around the equipment for easy maintenance / repairs. (viii) Necessary cut out provision for entry and exist of fuel lines cable to be incorporated in the enclosure as per the requirement. (ix) A see through transparent window ( glass or acrylic) in front of engine panel to provided for monitoring the operation. (x) Ducting if required, bellows, mechanical hardware like locks, hinges fasteners etc to be provided (xi) Deliverables. 75 DBA @ 1mtr at 75% load under free field conditions. The temp inside the enclosure will be within as per manufacturers recommendations above ambient temp. (xii) The enclosure should be provided with bulk head light fitting for inside illumination (xiii) The batteries should be placed inside the enclosure beside the DG set on a suitable insulated plat form. (xiv) the DG set should be provided with external Emergency stop push bottom. (xv) The acoustic enclosure parts shall be of powder coated after pre treat ment process. The powder coating shade should be Genset Green. The base frame should be painted with epoxy based black shade.
The following items are deemed to be included in the rate quoted for all DG sets:- (i) DHPP for testing purpose shall be supplied by the contractor without any extra cost to Govt. (ii) The contractor shall arrange for artificial load for testing for final testing for DG Set at site and the cost is deemed to be including in above offer. (iii) Testing of sound level should carried out at the site in presence of GE. (iv) Rubber Matting : 12 mm thick and of size 1mx2m rubber mat having chequered finish on top ISI marked 1100 V grade and each shall be laid in front of control panel and DG set as directed Documents : Standard documents as per manufacturer specifications such as maintenance & operation manufacturer specifications such as maintenance & operation manual, parts catalogue, Display charts such as maintenance and oil change chart/board (for generator and diesel engine) and log book as directed by Engr-in-charge.
DG SET Supply, installation, testing and commissioning complete of manufacture or OEM static silent (Sound proof enclosure), Diesel Engine Driven Generating set capable of delivering 160 KVA air cooled 415 volts (AC three phase, 4 wire system of supply 50Hz at power factor 0.8 minimum. the DG set shall consist of diesel engine coupled to a matching alternator through Direct/flexible coupling and mounting in common base frame and complete with mounting arrangements and inlet outlet return inlet oil arrangement, exhaust pipe complete and suitable for condition prevalent at Jamnagar including PCC foundation as recommended by OEM all around for ease of movement with ant vibration pads including all features to comply with latest CPCB guidelines including inbuilt AMF panel of suitable with all necessary arrangements and comprising of following:-
(i) Engine (prime mover): Diesel Engine 1500 RPM, direct injection, 4 cylinders, four stroke confirming to ISO 3046/BS 5514, air cooled naturally turbo charged capable of giving adequate BHP to drive alternator capable of delivering 160 KVA at outdoor atmospheric conditions at Jamnagar, 24 Volts (as per manufacturer recommendations) elect battery start complete with fully wheel all standard fittings/fixtures as per manufacturer and including suitable panel with tachometer lub oil temperature, starter system, dynamo, fuel electric control panel with electronic governor (ECPG) and Engine protection system (Shut down, High water temperature, low lub oil, oil pressure over speed etc) fuel tank and first fill of lub oil and other consumables etc.
(ii) ALTERNATOR : Brushless AC alternator, 3 phase, 415 volt, 4 wire rated for output of 160 KVA minimum power factory 0.8 1500 RPM IP 23 Protection class enclosure, insulation class 'H' salient pole, revolving field, single bearing automatic voltage regulator coupled through Direct/flexible coupled through flexible coupling with and to match the above engine. (iii) BASE FRAME : made out of structural steel as per manufactures recommended design/specification.
(iv) ACOUSTIC ENCLOSURE : Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norms and powder coated after seven tank process, the enclosure shall b designed for reducing the sound level to 75 DB (A) at a distance of 1 M at 75% load under field condition and of 70DB at 3 M from Gen set when DG set is working at full load along with testing conformance, labelling certification etc as laid down in GSR No.371 (E) dt 17 May 2002.(v) Foundation/Plinth/Base : shall be provided as per manufacturers recommendation, however minimum 0.5m space should be available all around the set and height of plinth shall not be less than 0.3M (vi) Diesel storage tank of capacity adequate for storage of diesel for 12 hours operation of Gen set.(vii) MISC: Tool kit, operation and maintenance catalogue, spare part list overhauling manuals guarantee card etc shall be provided as per manufacturer standard practices.
Supplying, install and erect in true vertical position prestressed concrete pole of 11.00 mtr long having 152mm x 152mm at top and 152mm x 260mm at bottom, class 9 poles complete bolts, nuts & screws as specified type, painting and marking alternate yellow and black strip 20cm wide alternate upto 1.5 m height, painting pole number, letters/figures by black paint including Excavation, PCC for foundation(1:3:6) & coping (1:2:4) etc complete all as specified and directed.
Supplying, install and erect in true vertical position prestressed concrete pole of 09.00 mtr long having 102mm x 172mm at top and 102mm x 279mm at bottom, class 10 poles complete bolts, nuts & screws as specified type, painting and marking alternate yellow and black strip 20cm wide alternate upto 1.5 m height, painting pole number, letters/figures by black paint including Excavation, PCC for foundation(1:3:6) & coping (1:2:4) exc complete all as specified and directed.
M&L for cable route indicators made out from CI round disc duly marked MES HT cable fitted with 45 cm long angle iron of size 40x40x5 mm fixed with nuts and bolts ,grouted in ground level with PCC of size 15 cm X 15 cm X 30 cm complete all as specified and directed.
M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized iron strip earth 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete as detailed below and all as directed.
NOTE FOR ITEM NO 63.00:- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC M25 design mix using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes the cost of 7.5 M GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.5 M GI earth strip of size 32 x 6 mm. Any variation in length shall be adjusted through deviation order.
S&F Junction box made out of FRP sheet of make SINTEX ready made type having aluminium bus bar with Amp capacity not less than 1.5 times rated capacity of main incomer MCCB of capacity 100 Amps 4 nos including bakelite connector of size 388X304X170 mm with necessary connector MCB 16 Amps and entry of gland and fixing arrangement to fix the box on pole by providing MS clamp of size 25X5 mm -2 Nos as per product complete all as specified and directed.
S&F street light bracket made out of GI pipe 40 mm dia Light grade ISI marked 1.5 mtr long bend to shape as required at site including MS clamp made out of flat iron 50X5 mm with necessary nuts and bolts etc as suitable to LED fitting complete all as specified and directed.
S&F LED street light fitting 60 Watt, 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply installing, testing and commissioning floor mounted LT panel out door type of suitable size cubical type CPRI approved factory fabricated, dust & vermin proof made out of CRCA sheet 3.15 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 50x50x6mm each 45 cm long panel duly powder coated heaving insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate Powder Coated Spray painted from outside and inside complete as under.
.Supply installing, testing and commissioning floor mounted LT panel out door type of suitable size cubical type CPRI approved factory fabricated, dust & vermin proof made out of CRCA sheet 3.15 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 50x50x6mm each 45 cm long panel duly powder coated heaving insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate Powder Coated Spray painted from outside and inside complete as under.
Supply installing, testing and commissioning floor mounted LT panel out door type of suitable size cubical type CPRI approved factory fabricated, dust & vermin proof made out of CRCA sheet 3.15 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 50x50x6mm each 45 cm long panel duly powder coated heaving insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate Powder Coated Spray painted from outside and inside complete as under.
Supply ,installation, testing and commissioning of copper wound Distribution transformer, step down outdoor type, complete with standard fittings, HT 11/0.433 KV ,3 phase 4 wire with OFF load tappings on HT side to vary secondary voltage within limit all as per IS : IS 1180-2014 level 3 of capacity of 315 KVA complete with all fittings and accessories.
(a) Off circuit changing switch with indicating plate and oil conservator with filling hole and cap -01 no (b) Silica gel breather with initial charging -01 set (c) Drain /sampling/filter valve with plug -01 no (d) Top filter valve with plug -01 nos (e) Explosion vent with diaphram -01 no (f) Thermometer pocket 2nos (g) Rating and diaphragm plate 1 nos (h) Earthing terminal 2nos (i) Additional neutral bushing for solid earthing 1 nos (j) Plain oil level gauge 1 no (k) Lifting plug 2 nos (l) Air release plug 2 nos (m) Bi directional & uni directional plate roll 4 no (n) Lifting lugs and jack lifting pad support. (o) One No Thermometer Dial Type vapour pressure type having range 0-120 degree centigrade with maximum temperature indicator and re-setting device to maximum temperature including needle of temperature gauge : Max reading painted terminal. (p) Explosion vent with double diaphragm and sight glass. (q) Hand hole of sufficient size to assess the interior of the tank. (r) Cover lifting eyes. (s) Necessary fencing, gate & gravel filling in switch yard area all as directed. (t) HV bushing outdoor (03 Nos) & LV end box with bushing complete set.
M & L for PCC platform of transformer shall be fixed on platform size 3.00X 3.00 X 1.20 meter (as per TD No 699) with PCC 1:3:6 type C-2 using 40 mm graded stone aggregate with suitable steps including two inverted rolled steel channel fixed on the top of platform ,15 mm thick plaster in CM 1:6 ON external surfaces ,earth work from work etc complete with two coat of white wash on platform of approved shade all as directed. The cost of same deemed to be included in the rate of above item.
Drilling hole under the existing road/ floor/ PCC path for laying GI pipe of dia varying from 50 mm to 100 mm at required depth for passing of LT/HT cables complete all as specified and directed.
Laminar Air Flow System:- Supply & fixing Laminar air flow work station with HEPA filters along with imported media of 99.99% efficiency rating and Pre filter driven air, International Standard Motor, blower assembly total made out of 18 gauge SS 304 cabinet along with table top UV Germicidal light fluorescent Lamp, Magnehelic gauge, Glass side panel and with caster wheels with feather touch control panel Horizontal air flow of size 220x85 cm. complete all as specified and directed.
Supply & fixing Laminar air flow work station with HEPA filters along with imported media of 99.99% efficiency rating and Pre filter driven air, International Standard Motor, blower assembly total made out of 18 gauge SS 304 cabinet along with table top UV Germicidal light fluorescent Lamp, Magnehelic gauge, Glass side panel and with caster wheels with feather touch control panel Horizontal air flow of size 160x80 cm. complete all as specified and directed.
Supply & fixing SS 304 Seamless Pipe Line of size 1/2" for Nitrogen Gas Pressure 70-100psi complete all as specified and directed.
Supply & fixing SS 304 Seamless Pipe Line of size 1/2" for Nitrogen Gas Pressure 60 psi complete all as specified and directed.
Supply & fixing SS 304 Seamless Pipe Line of size 1/2" for Nitrogen Gas Pressure 10 psi complete all as specified and directed.
Supply and fixing Pressure Regulating valve with Nipples for 70-100 psi Pipe Line complete all as specified and directed.
Supply and fixing Pressure Regulating valve with Nipples for 60 psi Pipe Line complete all as specified and directed.
Supply and fixing Pressure Regulating valve with Nipples for 10 psi Pipe Line complete all as specified and directed.
Supply and fixing SS flexible hose pipe complete all as specified and directed.
Supply and fix Voltage stabilizer Servo type for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 12.5% and speed of correction 8 Volts per second and of capacity 50 KVA complete all as specified and directed.
Supply and fix Voltage stabilizer Servo type for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 25 KVA complete all as specified and directed
Supply and Fixing 15 KVA 3 in 3 out UPS with out put Galvanic isolation Transformer with 12 V 42 AH battery per unit 30 Nos incorporated for 60 Min backup Rack Three phase AC input 360 to 415 V and output 415 V complete all as specified and directed
M&L for Chemical earthing, zinc coated safe earthing electrode (SEE) of 3 mtr length with inner pipe of 40mm dia with min 80-100 micron coating filled with black fill compound mixed with soil and high specific gravity crystalline conductive mixture (CCM) of grade 'B" filled inside the earth electrode include drilling of hole of 200 mm dia bore with boring machine of 15 mtrs depth in hard rock and filling the bore hole with black cotton soil upto 17 mtrs level ie., below the electrode bottom level, incl PCC earth pit and GI earth strip of 25 x 3 mm with GI tubing grade for protection upto 7.5 mtrs complete all specified and as directed.
M&L for earthing complete with copper plate electrode 60 cm x 60 cm x 3.15 mm buried directly in ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to and including copper strip 20 x 3 mm as earthing lead by means of bolts nuts check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No 5 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock PCC (1:3:6) Type C-1 Earthing Chamber Cast Iron cover with lifting handle, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete all as specified and directed.
S&F MCB TPN 40 Amps 10 KA rapturing capacity complete all specified and as directed.
S&F MCB TPN 63 Amps 10 KA rapturing capacity complete all specified and as directed.
Air conditioning :- Supply , install , commissioning and testing of Water Cooled Packaged Air Conditioners, comprising of Hermetic/Semi Hermetically sealed Reciprocating or Hermetically sealed Scroll Compressors with microprocessor based control, including copper refrigerant piping, electrical interconnection between indoor and outdoor units, suitable for operation on R - 22/R - 407c/R -410a refrigerants and of nominal capacity of 5.5 TR complete all as specified and directed.
Supply , assembly and erection of GI sheet with C & SS rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete of size 26 Gauge complete all specified and as directed.
Supply ,install, Commissioning and testing of commercial air curtain unit for prevention of dust and conditional air losses , single phase, 220 V 50 HZ made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of synthetic enamel paint (over baked ) with MS-CRC 18 gauge square perforated suction grills aluminium alloy fans and single phase electric motor, nozzles etc complete with fittings and accessories so as to produce 1-1.5 m/sec air velocity at floor level for door opening as size 40'' X 78 '' .complete all specified and as directed.
Supply , install , commissioning and testing wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating, working with non CFC refrigerant including necessary brazing and connecting the copper pipe of size 1/2 inch and 1/4 inch size of pipe of suitable required length and making holes for passing of copper pipes and electric cables and pressure testing with nitrogen and frozen gas vacuumizing the system and charging the Non CFC refrigerant and testing the complete system for smooth functioning of split AC upto satisfaction and EER 3.2.of capacity 2 TR. complete all specified and as directed.
Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input voltage between 170 v to 250 v with out put voltage stabilized at 230 v with accuracy of +/- 2.5% and cap 5 KVA Complete all as specified and directed
Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input voltage between 170 V to 250 V with out put voltage stabilized at 230 V with accuracy of +/- 2.5% and cap 3.0 KVA. complete all as specified and directed
Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input voltage between 170 v to 250 v with out put voltage stabilized at 230 v with accuracy of +/- 2.5% and cap 1 KVA complete all as specified and directed
Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input voltage between 170 v to 250 v with out put voltage stabilized at 230 v with accuracy of +/- 2.5% and cap 0.5 KVA complete all as specified and directed
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp complete all specified and as directed.
Cooling appliances :- Supply, installation, commissioning of Water cooler, working with non CFC refrigerant partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 40/80 ltrs complete all as specified and directed.
Supply and fix refrigerator, electric driven (single phase), capacity upto to 195 Litres .BEE 5 star rated complete all as specified and directed
Supply , install , commissioning and testing of Metal Top Deep Freezer, working with non CFC refrigerant, single phase 240 volt, 50 Hz of capacity 320 complete all as specified and directed
Supply , install , commissioning and testing desert cooler electric driven ( single phase ) having air flow capacity of 4000 cum per hour steel body complete all as specified and directed
FIRE ALARM SYSTEM & HYDRANTS :- Pipes ERW Steel including specials, supplied and laid complete, nominal dia 150 mm as per IS 3589 (19810 thickness 4.8 mm) complete all as specified and directed
Supply , install , commissioning and testing of Valve sluice (ISI Marked) flanged of class 1.6 PN supplied and installed complete size 150 mm (6") dia complete all as specified and directed
All as per item No 105 above but of size 100 mm (4") dia
All as per item No 105 above but of size 65 mm (2.5") dia
Supply , install , commissioning and testing of Valve reflux (ISI Marked) with by pass arrangement supplied and installed complete of size 150 mm (6") dia complete all as specified and directed
Supply , install , commissioning and testing of Gate valve (ISI Marked) 25mm dia complete all as specified and directed
Supply , install , commissioning and testing of Strainer Y type conforming to IS, of size 150 mm (6") dia complete all as specified and directed
Supply & fix fire hydrant landing valve type A (single headed outlet) of 63 mm dia of size conforming to IS 5290 complete all as specified and directed
Supply and fix 63 mm dia 15 mtr long hose conforming to IS 636 complete with male and female coupling conforming to IS 903 complete all as specified and directed
Supply and fix 63 mm dia gun metal branch pipe with 12.5 mm nozzle conforming to IS 903 complete all as specified and directed
Supply and fix hose box for keeping 2 Nos hose pipe of length 15 meter each, branch pipe. Nozzle, coupling etc of MS sheet of Thickness 2.0 mm complete all as specified and directed
Supply , install , commissioning and testing of Pressure gauge 4inch dial, 0 to 14 kgs rating complete all as specified and directed
Supply and fix fire hydrant stand post with provn of single outlet conforming to IS 908 complete all as specified and directed
Supply and fix electric motor siren conforming to IS 1941 suitable for three phase 415 V supply with motor not exceeding 3.75 KW power and able to deliver 143 DB noise level complete all as specified and directed
Pressure switch universal type complete all as specified and directed
Supply , install , commissioning and testing of Flow switch 100mm dia complete all as specified and directed
Pipe support for all type of pipe including hangers fasteners elbows supports Tees complete all as specified and directed
Sprinkler glass bulb type (Standard response) as per IS 15105/TAC guidelines 68 degree temperature rating pendent type complete all as specified and directed
Supply, installation, testing and commissioning floor mounted LT panel in door type of suitable size cubical type CPRI approved factory fabricated, dust and vermin proof made out of CRCA sheet 3.15mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 50x50x6mm each 45cm long panel duly powder coated heavy insulated bus bar TPN with openable shutter on both side (front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles and connecting to MCCBs with suitable size of aluminum strip duly bended and fixed with nuts & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 powder coated spray painting from outside and inside complete as under...
(a) Aluminum bus bar rating 1.5 times of incoming MCCB rating for phase and neutral both - 04 Nos (b) MCCB Thermal base type TPN 100-125 Amp, 50Hz, 415V with rupturing capacity 16 KA. As I/Comer (01 No) (c) MCCB Thermal base type TP 63-80 Amp, 50Hz, 415V with rupturing capacity 16 KA. For centrifugal pump motor (01 Nos) (d) MCCB Thermal base type TP 25-32 Amp, 50Hz, 415V with rupturing capacity 16 KA. For Jackey pump (01 No) (e) Fully automatic star delta starter for 75HP pump with Amp rating 45-75Amp -01 Nos (f) Fully automatic star delta starter for 30HP pump with Amp rating 14-23Amp -01 Nos (g) MCB TP 415V 10 KA 6-32 Amps,-02 Nos (h) Indicating lamp YB - 03 set (j) Multifunction meter - 03 Nos
CRANE:- Supply , installation , commissioning and testing of (X-Y) Crane electrically operated OH complete with span 9 meter , lifting height 8 meter and HOOK Approach 900 mm incl Push button Operator of capacity 2.5 tons complete all specified and as directed.
CONDUIT FOR TELEPHONE :- S&F non metallic PVC conduit of size 25 mm dia excluding of junction boxes but including all tees, bends & elbows reducers etc complete all specified and as directed.
S&F junction boxes 1to 4 way of size 25 mm dia .complete all specified and as directed.
Demolition:- Taking down copper/aluminium point wiring (light, fan, socket or power ) complete , including fixture and fittings such as switches , ceilling roses, pendants, regulators, sockets , light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors, etc.
Taking down carefully ceilling fan of any sweep and depositing to MES store yard complete all as specified and directed
Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed
Taking down carefully aluminium unservice wire 2 x 6 sqmm incl bracket complete all as specified and directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frames.) not exceeding 1.5 Sqm each complete all as specified and directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frames.) exceeding 1.50 Sqm but not exceeding 4.00 sqm each complete all as specified and directed
Demolition of brick work or stone/boulder masonry built in cement mortor or cement lime mortor incl all quoins, arches, pillars etc all as specified and directed
Demolition of RCC of any description & in any position not otherwise specifically provided complete all as specified and directed
Taking up or down steel tubing and connections, including cleaning for refixing or removal to stack bore of pipe 15mm complete all as specified and directed.
Ditto all as per item no.124.09 above but bore of pipe 20mm
Dismantling of water tanks and removing to store exc 500 Ltr & n. exc 1000 ltr complete all as specified and directed
Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD Land complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed
Dismantling AC (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as specified and directed
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40 sqcm in section, in any position in framed work. complete all as specified and directed
Dismantling framed trusses of span n exc 10m complete all as specified and directed
Dismantling iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Demolition of Drain pipes 100/75 mm dia complete all as specified and directed
M&L for 5 layer Synthetic/Acrylic sports flooring based on 100% cushioned acrylic system for volleyball court/ Basket ball court, complete all as per Manufacturer's instructions complete all as specified and directed
Supply and erection of factory made PU prepainted standard pole (Pair) with extension 3.2m for basket ball (Fixed Type) made up of mild steel pipe of 6 inch dia including 18mm thick transparent Acrylic heavy duty solid ring and nylon net as per Manufacturer's instructions complete including Excavation, PCC for foundation etc. all a complete all as specified and as directed Note: Sample and make of pole to be Approved by GE in consultation with user
Supply and erection of factory made PU prepainted standard volleyball pole (Pair) as per Manufacturer's instructions complete including Excavation, PCC for foundation etc. All as per Manufacturer's instructions complete all as specified and directed Note: Sample and make of pole to be Approved by GE in consultation with user
PROVISIONAL LUMP SUM (PLS) Provide Provisional lump sum (except pole and Synthetic/Acrylic sports flooring) for: Volley Ball Ground - 1 Nos and Basket Ball Ground - 1 Nos complete all as specified and directed.
NOTE FOR ITEM NO 130.00:- 1) Provisional lump sum shall be expended wholly or in parts as directed by GE. The works (Except excavation and earth work) under Provisional Lump Sum shall be measured and paid for at applicable rates in MES SSR 2020 Part-II subject to percentage ( + or - denomination) computed under last column of this schedule above/below the provisional lump sum price worked out by the MES. (2) For details refer relavent TD drawings. excavation and earth work against PROVISIONAL LUMP SUM shall be measured and paid under Sch 'A' Part-II.
M/s Matadeen Ramchandra Agarwal
vijay infraprojects pvt ltd
Hi Tech Transpower Pvt Ltd
M/s godara infratech and power industries
Hariom Projects Pvt Ltd
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid