LAYING OF DISTRIBUTION LINES WITH HOUSEHOLD CONNECTIONS AND APPURTENANT WORKS FOR SYUDA BADAIT WATER SUPPLY SCHEME OF BLOCK BHIMTAL

Amount

Excavation in soil mixed with single boulders etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5 M and lead up to 30 M with back filling, watering, ramming of excavated earth in the trenches.

Soil mixed with boulders and bajari

Medium rock

Supply of all materials, Carting from site store to site of work, Laying & Jointing of G.I. screwed pipes (including supply of all jointing materials like specials, white lead, hemp & oil etc) in trenches with its cutting, threading and testing of pipe line and supply of labour ,T&p etc complete in all respect.

40 mm dia

32 mm dia

25 mm dia

20 mm dia

15 mm dia

Supply and fixing of the following fittings including cartage of materials labour T&P and testing of valves etc. complete.Wheel valves / Gate Valves (Size in mm)

65 mm dia

40 mm dia

32 mm dia

25 mm dia

20 mm dia

Providing household ferrule tape connections to each household including supply of all materials, t & p,labour etc.complete.(Taking 3.00 mtr. Length of pipe)

Providing and fixing of following fittings for Househols tape connections

Clamp 65 mm dia

Clamp 50 mm dia

Clamp 40 mm dia

Clamp 32 mm dia

Clamp 25 mm dia

Excavation work by mechanical means / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. - All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work up to plinth level - 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand).

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. for doors, window, ventilator and similar works. use angle, square bar, etc

12 mm cement plaster of mix in 1:6 (1 cement : 6 coarse sand)

Finishing walls with exterior paint of required shade - New work (Two or more coat applied over and including base coat of water proofing cement paint applied .

Painting Steel work(doors, windows, etc.) with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied over an under coat of primer applied of approved brand or manufacture.

RR stone masonary in 1:6 cement sand mortar in foundation and plinth including supply of all materials,labour T&P etc. required for proper completion of the work.

Same as above item no13 but laid in dry

Providing and laying in position cement concrete of specified grade All work up to plinth level - 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Sharda Prasad

M/s Trilok Rawat