Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.6 LAccepted-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹12.1 L+₹35,810 (3.04%)Rejected-AOC | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹12.5 L+₹74,525 (6.33%)Rejected-AOC | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹13.5 L+₹1.7 L (14.7%)Rejected-AOC SHAMAL BECHAR S CHAWL SIDHANATH ROAD B H KHANDERAO MARKET VADODARA 390 001 GUJARAT | VADODARA | VADODARA | GUJARAT | 390001 | L4 | Rejected-AOC Being not L1 |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sachin Singhal EE GE Army Baroda
Opp Akashwani, Makarpura road PO-ONGC Baroda-390009
As per BOQ
2022_MES_544437_1
8585
Open Tender
Civil Works
Item Rate
330 days
GE Army Baroda
As per tender documents
5 documents required · 5 mandatory
₹500
Yes
GE Army Baroda
₹30,000
Yes
12 Nov 2022
10 Aug 2022
9 Sept 2022
10 Aug 2022
5 Sept 2022
23 Aug 2022
11 Aug 2022 - 22 Aug 2022
60 days
Amount
Taking down cement plaster, on brick or stone wall, concrete surface, etc including raking out joints, hacking for key, scrubbing down with water all as directed.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and as directed
M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over priming coat of alkali resistant primer complete all as specified and as directed
M&L for preparation of old plastered surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash all as specified and directed
M&L for preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash all as specified and directed.
M&L for preparation of old decorated surfaces of walls cornices etc including washing, rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.
M&L for complete removal of existing treatment of walls cornices etc and applying two coats of distemper oil emulsion over a coat of primer all as specified and directed.
M&L for applying of 1.5mm thick plaster of paris putty over plastered surface Note:- This item shall be executed on surfaces as directed by Engr-in-charge
M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints all as directed.
M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specifiede and directed
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tiles exceeding 0.11 sqm and n. exc 0.18 sqm in floor etc set and pointed in white or coloured cement to match laid over and including sreed bed 15 mm thick in cement mortar (1:6) complete all as specified and directed
M&L for glazed ceramic coloured wall tiles in vertcal surface 300x200/350x250/450x350 mm and 7 mm thick set and jointed in neat cement slurry and pointed in white or colovred cement to match laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed
M&L for vitrified ceramic light coloured tiles 10 mm thick (square/rectangular) polished area of each tiles n.exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed in bd 15 mm thick in cement mortor 1:6 complete as specified
M&L for vitrified ceramic light coloured tiles 10 mm thick (square/rectangular) polished area of each tiles n.exc 0.36 sqm on vertical surface as in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10 mm thick rendering in CM 1:4 complete ass as specified
M&L for 18 mm to 20 mm thick green marble slab for kitchen platform/ shelf in one piece and vertical faces duly machine polished semi circular edging on external/projected surface over and including 15 mm thick screed in CM (1:6) complete all as specified and directed
Providing and fixing in replacement factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc all as per Manufacturers's speciifcations & Instruction complete.
Taking down chowkats or frames with shutters (without taking off shutters from the frames )not exc 1.5 Sqm each complete all as directed incl making good the disturbed portion to match with existing.
All as per item no 19here in above but exc 1.5 Sqm but n.exc 4 Sqm
Taking down shutters of any description exc 1 sqm but n exc 2 sqm complete all as directed
Taking down shutters of any description not exceeding 1 Sqm each complete all as directed
S&F Pressed steel frames for doors with one or more rebates of size 125X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; complete,as specified.
S&F Pressed steel frames for doors with one or more rebates of size 105X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; complete,as specified.
S&F factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as directed.
S&F factory made 35 mm thick 2nd class hard wood plain, framed paneled door shutters (two panels) with lock rail and panel of 9 mm thick BWP commerical ply 12 mm thick veneered particle board with commerical veneering on both faces , the size of rail and stile as per IS: 1003 (part-I) kiln seasoned and chemically pressdure treated complete
M & L for stainless steel spring type hinges of heavy grade suitable for cabinet shutters fixed with wooden frame.
M & L for stainless steel handles decorative type of approved pattern of size 125 mm. All as specified and directed.
M & L for stainless steel handles decorative type of approved pattern of size 75 mm. All as specified and directed.
M & L for basket for kitchen cabinets made out of stainless steel SS 304 grade fixed in position on channel guides of different sizes as follows as per sample: -
for dishes
for large plates
without shelves
For bottles etc.
M & L for stainless steel SS-304 grade chanel rails with ball bearing for the sliding drawers of kitchen cabinet baskets of various depths all as specified and ditected
M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in bed block or hold fast
M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete.
All as described in item No 34 above but 75mm size all as specified and directed.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
All as per item No 37 here in before but 100 mm long.
Taking up or down GI tubing 15mm bore from wall/ceilings including all fittings segrated and stacking the pipe complete all as specified and directed
S&F GI pipe medium grade15 mm bore in wall and ceiling or laying in floors, including new fittings as required at complete all as directed
Refixing old serviceable steel tubing and connections in new or old position ( walls,ceiling, floor etc) in 15mm bore including S & F new fittings as required complete all as specified and directed
Taking up or down GI tubing 20mm bore from wall including all fittings segrated and stacking the pipe complete all as specified and directed
S&F GI pipe medium grade 20 mm bore in wall and ceiling or laying in floors, including new fittings as required complete all as directed
Refixing old steel tubing and connections in new or old position ( walls,ceiling, floor etc) in 20mm bore including new fittings as required complete all as specified and directed
Cutting chases for concealed pipe where required and pointing in cement mortar 1:3 etc. in Brick walls for bore of pipe 15/20 mm complete all as directed.
S&F rotational moulded double layered ISI marked polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position including taking down old unserviceable water tank complete all as specified and directed.
S&F rotational moulded double layered ISI marked polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position including taking down old unserviceable water tank complete all as specified and directed
S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete, screwed for iron pipes or brass ferrule and fixed.
Hacking out old broken glass (any thickness size , quality or description ) from wooden / steel frames glazed with putty or fixed with beads complete all as directed.
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in square n. exc.0.50Sqm each pane complete all as specired and directed.
S&F 4 mm thick figured glass, ordinary quality n. exc 0.5 sq. m in each pane , fixed with necessary rubber beading complete all as specified and directed.
S&F Statinless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and directed.
S&F in repairs Statinless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and directed.
S&F in repairs, floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm, anodized with hard drawn steel spring, fixed in floors complete all as specified and directed.
M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.
S&F in repairs 15 mm bore angle valves cast copper alloy chromium plated with long shank and cup concealed type with round headed knob, complete all as specified and directed.
S&F in repair pillar taps 15mm bore fancy type, cast copper alloy with capstain heads, chromium plated serewed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipes complete all as directed.
S&F 2 way angle valve with wall flange 15mm bore cast copper alloy chromium plated complete all as specified and directed.
S&F in repair 10 Ltr capacity PVC valveless, syphonic action type,low level flushing cistern white complete with in let, ball valve float and handle incl bracket complete all as directed
S&F in repair of stainless steel Jet Spray Hygenic spray set 32mm with 15mm dia long acrylic tube 1mtr long complete all as directed.
S&F in repair MS chromium plated shower rose heavy grade of size 125mm with accessories complete all as specified and directed.
S&F aluminium door seal of suitable section fixed to door shutter with screws complete all as directed
S7F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair towel ring brass chromium plated all as specified and directed.
S&F PVC connection pipe of size 15mm dia & 450mm long with chromium plated brass coupling on both ends complete all as directed.
S&F as in repair vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, flush pipe, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
S&F in repairs Plastic water closet seat cover, coloured , closed pattern with flat bottom, and cover including mild steel chromium plated or aluminium hinging device complete all as directed
S&F in repairs Vitrous china wash down water closet pan ( pedestal pattern ) , white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed.
S&F in repairs Virrous china squating pan 'Orrisa' pattern long pan size 580x 440 mm , white with foot rest (excluding flushing cistern and flush pipe) but including cast iron trap and making good to floor complete all as specified and directed.
S&F as in repair concealed stop cock with long shank and sheet flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions all as specified and directed.
S&F as in repairs CP wall mixer three in one system for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed complete all as directed
S&F in repairs stainless steel kitchen rack size 900mmX900mmX250mm of weight not less than 5 Kg. Each. all as specified and diercted.
S&F CP centre hole wash basin mixer for 15 mm bore complete all as specified and directed
S&F in repairs CP waste coupling 32mm (half or full thread) complete all as specified and directed
S & F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915mmX460mm bowl size 410mmX330mmX160mm complete all as specified and directed.
S&F in repairs 20mm dia anodised aluminium tublar curtain rod including bracket complete all as specified and as directed
S&F in repairs, 15mm bore Bib taps long body with wall flange fancy type chromium plated cast copper alloy with capstan head screwed down, screwed for iron pipe or for brass ferrule all as specified and directed
S&F as in repairs 32mm dia PVC flexible waste pipe of not less than 60 cm. Long all as specified and directed
S&F in repair CP Grating of size 150x150 mm complete all as specified and directed.
S&F in repir Toilet paper holder of stainless steeelfixed to walls with chromium plated (CP) brass screws
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
S&F in replacement 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S&F in replacement PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls, roofs etc all as directed.
Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.
M & L for concealed point wiring complete with multistranded copper conductor (FRLS)1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of wiring, drawn in and including PVC conduit not less than 20 mm dia concealed duly fixed with U-Clips, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multistranded copper conductor 1.5 sqmm size solid PVC insulated unsheathed cable (FRLS) as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.
One light point controlled by one one switch.
One Fan point controlled by one one switch.
One 3 pin 5 Amps socket outlet on same board with other switch.
One 3 pin 5 Amps socket outlet on just below/adjacent to switch board.
One 3 pin 5 Amps socket outlet on independent board .
One light point controlled by two two way switches
One bell point controlled by one switch
All as per item No. 88 above but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board
Dismantling and taking out old u/s submain wiring and M & L for sub main wiring (Concealed) using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC conduit incl accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including one single core 6 Sqmm earth wire, PVC insulated & unsheathed all as directed. Note :- Two runs of main wire and one run od earth wire including conduit shall be measured as one length
Dismantling and taking out old u/s submain wiring and M & L for sub main wiring (Concealed) using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC conduit incl accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including including one single core 4 Sqmm earth wire, PVC insulated & unsheathed all as directed. Note :- Two runs of main wire and one run od earth wire including conduit shall be measured as one length
Supply and fix 4' feet LED 1X20W LED tube rod on replacing existing 36/40watt fitting at side as per user requirement, with system lumen output of minimum 2000 lumens suitable for G13 holder with single side connection. The Luninaire should have cool daylight color temp 6500K, CRI >80, PF >0.95, Life class of 40,000 burning hrs with 70% lumen maintenance, Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection > 2 KV. LED to mounted on Rod and not directly on the surface of the tube. All the photometrical & electrical parameters must be supported by LM 79-08 test report from NABL accredited LAB or UL switching cycle of 50,000 times. The LED tube light conforms to applicable IS 10322/EN 60598, similar to CG model No : LT8-20-865-2 or equivalent Make of Philips /Havells/Wipro.
Supply,Testing & Commsioning of IP66 & IK09 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . System Lumen Output of minimum 600 lumens. Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminaire should be with Opal diffused Polycarbonate. including & connecting with 0.5 sqmm PVC insulated overall PVC sheathed 3 core flexible cable complete with all other accessories & all as specified & directed. MAKE: Philips Model - WT202W or equivalent wipro, crompton, Havell's,
S/F switch piano flush type single pole one way 5 Amp 240 Volts. Make : Legrand/Polycab
S/F switch piano flush type single pole two way 5 Amp 240 Volts. Make : Legrand/Polycab
S/F switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt. Make : Legrand/Polycab
S/F switch socket combination 3 pin 5 and 15 Amp 2 in one flush with inbuilt indicating lamp. Make : Legrand/Polycab
S & F Bell switch including Bell ding dong type, one way, 240 volts, AC, ISI marked.
S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked. Make : Legrand/Polycab
S & F in repair MCB DB factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc completed. Make : Legrand/Schneider/L&T as under:-
TPN 4 Way
S & F MCB TPN 63 Amps 35 KA rupturing capacity of Make Legrand or its equivalent in Schnieder/ABB.
S & F MCB SPN 32 Amps 10 KA rupturing capacity. Make Legrand or its equivalent in Schnieder/ABB.
S & F MCB SP 5 to 40 Amp 240 Volts
S/F in repair sheet metal enclosure for single pole and neutral 08 way 240 voilts, 100 Amp rated bus bar. IP 43 - IK -09 CAT No. 6077 11 of Make Legrand or its equivalent in Schnieder/ABB.
Supply and fixing connecting resistance type fan regulator A/C 240 Volts. Make : Legrand/Polycab
Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps. Make Legrand or its equivalent in Schnieder/ABB.
S & F wall security light LED type complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as directed and specified by Engr-In-Charge. CAT Part No.LSTO-25-CDL 25watt of Make CG or its equivalent in Phillips/Wipro.
S & F lamp holder for LED bulb PVC/Polycarbonatetype with cord grip including Supply and fixing of of 7 W LED Bulb with system lumen output of 600 lumens. System Efficacy should be > 85lm/ W. TheLamp Should have Cool Daylight Color temp of 6500K . Lamp should be supplied with E27 Holder. Similar to Philips Ace Saver. Make of lamp holder : Legrand/Polycab, Make of LED Lamp : Phillips/CG.
S&F of Exhaust fan 250 mm sweep 1250 RPM with minimum airflow/air delivery 720 Cmh, 06blades, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 230 Volt AC supply, rated power input not more that 45watt, connecting up including provison of cable from ceiling rose to fan. Make : Crompton Greaves, Model : BRISK AIR
Supply, Fixing, Testing & Commisioning of 2' 10W Mirror LED Batten with system lumen output of 1000 lumens. System Efficacy should be > 85lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Housing of luminaire should made of die cast alumunium & mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete all as specified & directed. Make- Philips, Model-BN021 LED 10S-6500 PSU GR S1 or equivalent in Wipro/Havells
D.B.Rathod
P K SHETH
M/s. RAMESH NARHARI VALEKAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .