SPECIAL REPAIRS TO BLDG NO P 60 1 2 OR LIVING LINE OF BHQ IN EME BN AND OTHER SANCTION WORK AT THE AREA OF AGE B R I UNDER GE ARMY CENTRAL IN ARMY AREA JODHPUR

Amount

Demolition of cement concrete in ground floor or pavings n exc 15 cm in depth, below or above ground level, complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified & directed.

M&L for 75mm thick Plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate), as in plinth protection including necessary form work laid in alternate bays and filling the joints with bitumen mastic filler, complete all as specified and directed.

M&L machine pressed precast conctete interlocking paver block, size 60 mm thick & any shape, rubberised finish confirming to IS 15658-2006, M-35 Grade, with grey cement and pigments, over and including sand cushioning of 25mm thick, complete all as specified and as directed.

Demolition of stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land, complete all as specified and as directed.

Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good but making good in lime or cement mortar of the same mix as for new walling, complete all as specified and as directed.

M&L for squared rubble walling, Jodhpur type, regular coursed , well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

Ditto all as per item no. 7.00 here-in-above, but except stone.

M&L precast cement concrete 1:2:4 type C-1 using 20mm graded stone aggregate as in solid block masonry not exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and as directed .

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to square rubble walling un-coursed or brought up to courses, complete all as specified & as directed by Engineer-in-charge.

Dismantling of stone slab / floor / wall tiling of any description including cement mortar bedding / backing coat and removing rubbish to out side MD Land complete all as specified and as directed.

M&L non skid ceramic tiles (premium quality), coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6, complete all as specified and as directed.

M&L non skid ceramic tiles (premium quality), coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in dado / verticle surface, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4, complete all as specified and as directed.

M&L Machine cut kota stone slab flooring using 18 to 20mm thick , laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish over and including 10mm thick CM 1:4 on backing coat on brick or concrete surfaces, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises, complete all as specified and as directed.

M&L plastering 10 mm thick in CM 1:3 on concrete surfaces of ceiling / facia / RCC chajja, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15 mm thick, plastering in CM 1:6 on block / stone masonry surfaces finished even and smooth with out using extra cement, complete all as specified and as directed.

Racking out joints/ pointing to random rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering, complete all as specified & directed by Engineer-in-charge.

M&L for keyed pointing in CM 1:3 to square rubble stone masonry jodhpur type wall surfaces, uncoursed or brought up to courses complete all as specified and as directed.

M&L for Flush pointing in CM 1:6 to square rubble stone masonry jodhpur type wall surfaces, uncoursed or brought up to courses complete all as specified and as directed.

Preparing new plastered or unplastered surfaces and applying (3mm thick in two layers) Birla/JK wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls, complete all as specified and as directed.

Complete removal of existing treatment of any description on walls and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces, complete all as specified and as directed.

Preparation of old white washed surfaces and applying one coat of white wash on wall surfaces, complete all as specified and as directed.

Preparation of old plastered surfaces and applying one coat of white wash on ceiling surfaces, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying two coats of color wash incld & over single coat white wash on wall surfaces, complete all as specified and as directed.

Preparation of old white washed surfaces and applying one coat of color wash on wall surfaces, complete all as specified and as directed.

Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .

Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed .

M&L rolled mild steel sections like angle, channel, flat, square etc as in framed work such as door frames, grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; cooler stand, ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

S & F in repairs MS chromium plated peg set of fivefixing with wall, complete all as specified and as directed.

M&L rolled mild steel sections like fabrication of pressed steel cupboard / door shutters using 1.00 mm thick MS plain sheet & with frame 1.25 mm thick bent to shape incld two coat and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.

M&L factory Made flush shutters, 40 mm thick solid core with block board core construction, both side laminated, as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.

Taking down steel windows and ventilators ( glazed / fly proof) of any description, complete all as specified and as directed.

S&F Factory made steel window with side hung shutters including box type hinges, steel peg stay, glazed window with glazed bar, complete all as specified and as directed.

S&F Factory made steel window with side hung shutters including box type hinges, steel peg stay, gauged window, complete all as specified and as directed.

S&F Factory made steel ventilator with top hung shutters including box type hinges, steel peg stay, glazed ventilator, complete all as specified and as directed.

S&F Factory made steel ventilator with top hung shutters including box type hinges, steel peg stay, gauged ventilator, complete all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed .

S&F butt hinge of size 100mm , medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F 125 mm long double action spring hinges, mild steel with steel wire spring, stove enameled, black complete all as specified & directed by Engineer-in-charge.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor, complete all as specified and directed.

S&F 4.00 mm thick figured glass,pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

S&F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed to Al door/window, complete all as specified and as directed.

S&F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00mm and fixed to Al door/window, complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in hold fast block concrete, complete all as specified and as directed.

M&L flat iron as in hold fast for door frame and similar work fixed with angle cleates, confirming to Fe 290 Grade - E - 165 complete all as specified and as directed.

S& F in repairs decorative MS curtain rod pvc coated of 22 to 25 mm dia, including 8 nos PVC rings per running meter of curtain rod, complete all as specified and directed.

S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & as directed by Engineer-in-charge.

Supply only water proofing compound (ISI Marked)

M&L 25mm thick (average) PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base , the surface of concrete is to be finished even & rough to receive tile flooring surface, with out using extra cement, complete all as specified and as directed.

Complete removal of existing water proofing treatment of any description including bedding up to the true surface of original concrete, in RCC roof slab / stone patty and roughening the old surfaces by picking, sweeping clean and washing down with water to remove dust etc including removing rubbish to out side MD land, complete all as specified and as directed.

Plain cement concrete, 1:2:4 type B0 (using 12.5mm graded crushed stone aggreage) as in coved fillets of radius 75mm provided at junction of roof and parapet / vertical surfaces, padding concrete to achieve slope as required , platform for water tank on roof slab etc., including necessary form work, complete all as specified and directed.

M& L for carring out of water proofing treatment in roof in the following stages : (a)- M & L 10 mm thick sceeding in cement mortar 1:3 on brick work or concrete surfaces on roof surfaces mixed with WPC, surface finished even and smooth without using extra. (b)- Apply first coat of bitumen primer confirming to IS 3384-1986 @ 0.40Kg/Sqm. (c)- Second coat of bonding material using hot blown type bitumen confirming to IS- 702-1988 grade 85/25 @1.20 Kg/ Sqm (d) Third layer of 3 mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method. The side overlaps of minimum 75 mm and the end laps of minimum 100 mm. All overlaps & joints shall be sealed as per manufacturer's instructions. (e) Fourth coat of bonding material using hot blown type bitumen confirming to IS 702-1998 of grade 85/25 @ 1.20 Kg/Sqm (f) Fifth and top most layer of surface finish 25mm thick PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate in roof padding over APP membrane, the surface of concrete is to be finished even and smooth with using extra cement and proved V shaped groove 6mm wide & 10mm depth filled with mastic bitumen of (1:1) complete all as specified and directed by Engr-in-charge.

M&L machine pressed precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in kerb stone blocks of approved size and setting in cement mortar 1:4, complete all as specified and as directed .

S & F Fibre glass reinforced translucent 2 mm thick corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof ,wall etc, complete all as specified and as directed.

Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .

M & L coloured glazed ceramic tiles (premium quality) of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles, complete all as specified and as directed. Note:- The tiles shall be in one or more colour patterns incld highlighters all as per approved and directed by Engg-in-charge.

Rendering 10 mm thick in cement mortar1:4 on fair faces of block masonry wall surfaces and finishing the surface even and smooth without using extra cement all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint incld & over one coat of primer, complete all as specified and as directed.

Preparation of old painted external surfaces of walls and applying one coat of cement base paint, complete all as specified and as directed.

Preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

Preparation of old painted steel surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.

Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3 universal type,suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S&F 150 mm floor door stopper of brass body and tongue alloy , anodised ,with hard drawn steel spring ,fixed in floor, complete all as specified and directed.

500 ltrs capacity rotational moulded polythene water storage tanks (white) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including disconnection of old u/s existing water tank and remove to store or sch of credit, complete all as specified and as directed.. Make:- Sintex (Pure) / Rotex / Polytuf

1000 ltrs capacity rotational moulded polythene water storage tanks (white) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 25mm bore pipe weight not less than 455gms, including disconnection of old u/s existing water tank and remove to store or sch of credit, complete all as specified and as directed.. Make:- Sintex (Pure) / Rotex / Polytuf

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Taking up or down 25mm bore steel water tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Refixing of GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Refixing of GI tubing (ISI marked) 20 mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Refixing of GI tubing (ISI marked) 25 mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

2000 ltrs capacity rotational moulded polythene water storage tanks (white) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 25mm bore pipe weight not less than 455gms, including disconnection of old u/s existing water tank and remove to store or sch of credit, complete all as specified and as directed.. Make:- Sintex (Pure) / Rotex / Polytuf

S&F in repair corner sheet glass of 5mm thick, 200mm to 250mm size,as in shelf , fancy type, triamgular in shape and one side circular complete all as specified and directed. Make: Jaquar cat part no. CAN-1173 or its equivalent in Cera / Marc

S & F CP Health faucet with 1m long flexible tube with wall hook with Non Return Valve [back flow preventer] complete all as specified and as directed. Make: Model No.ALD-CHR- 579 of JAQUAR make or equivalent model in Cera / Hindware / Johnson

S&F vitreous ware wash down water closet [Pedestal Pattern], Coupled closet, [ETWC] consetellation cistern filling, cist & lid con dual flush, including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and as directed. Make: Model No.21038 (Pastel) of hindware make or equivalent model in Cera / Jaquar / Johnson

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, PVC connection15mm size with PTMT nuts of length 450mm long, cast copper alloy, chromium plated, complete all as specified and as directed. Make: Model No.10067 of hindware make or equivalent model in Cera / Jaquar / Johnson

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, PVC connection15mm size with PTMT nuts of length 450mm long, cast copper alloy, chromium plated, complete all as specified and as directed. Make: Model No.91066 of hindware make or equivalent model in Cera / Jaquar / Johnson

Stop valves, two way angular, CP long thread with flange, screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions, complete all as specified and as directed. Make: Model No.QQT- 7053 of JAQUAR make or equivalent model in Cera / Hindware / Johnson

S&F in repair, bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed. Make: Model No.QQT- 7037 of JAQUAR make or equivalent model in Cera / Hindware / Johnson

S & F in repair CP central hole basin mixer with regular spout with out popup waste system with 450mm long braided hose with connecting legs and wall flanges complete all as specified and as directed. Make : Model No.QQT- 7167B of JAQUAR make or equivalent model in Cera / Hindware / Johnson

S & F in repair CP wall mixer with telephonic shower arrangement ,connecting legs and wall flanges but with out crutch and telephone shower and over head shower rose 150X150mm square shape single flow ,body and face plate brass with CP ,arm 300mm long joiting to pipe, complete all as specified and as directed. Make : Model No.QQT- 7281 of JAQUAR make or equivalent model in Cera / Hindware / Johnson

Dismantling of cast iron / PVC pipes of 100 mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

Dismantling of cast iron / PVC pipes of 75 mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches, complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches, complete all as specified and as directed.

S & Fin repairs 100 mm bore cast iron nahani trap with grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.

S & F Cast Iron Bends [any radius], diminishing pieces or tapers [larger bore measured] of 110 mm bore, for Cast Iron soil / waste / vent pipes complete all as specified and as directed.

S& F 110 mm bore cast iron vent cowl complete all as specified and as directed.

S& F 110 mm bore cast iron vent complete all as specified and as directed.

S& F 75 mm bore PVC floor trap, complete all as specified and as directed.

M&L plain cement concrete (1:2:4) type B-1using 20mm graded crushed stone aggregate as in roof kerbs or mud steps, rounded or chamfered on edge, fixing of holdfast etc complete all as specified & directed by Engineer-in-charge.

5 to 10 mm thick plain PVC colour sheet in strip & channe feathered at edges for fixing on solid PVC false ceiling and wall lining, insulated PVC ceiling, and solid PVC partitions inclusive of solvent cement and fixing at site incld all fittings and fixtures, complete all as specified & directed by Engineer-in-charge.

M&L non skid ceramic tiles (premium quality), coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6, complete all as specified and as directed.

M&L 15 mm thick, plastering in CM 1:4 on PCC block / stone masonry surfaces finished even and smooth with out using extra cement using integral water proofing liquid as per manufracturer, complete all as specified and as directed.

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.

M&L precast cement concrete 1:2:4 type C-1 using 20mm graded stone aggregate as in solid block masonry exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and as directed .

S&F 7.50 to 10 cm thick sand stone slabs Jodhpur pattern/colour in manhole cover, etc 25 to 35 cm wide, self faced on other side and set and pointed in cement mortar (1:3) complete all as specified & as directed by Engineer-in-charge.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps of suitable size complete all as specified and as directed .

S& F 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.

S& F 110 mm bore PVC [SWR], branch pieces, [single "Y"] equal or unequal with access door complete all as specified and as directed.

S& F 110 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and as directed.

S& F 110 mm bore (SWR) PVC vent cowl complete all as specified and as directed.

S&F of PVC (SWR)125mm /110mm dia gully trap, setting and jointing with solvent cement complete all as specified and as directed.

Vitreous china ware wash hand basin, (Ivory color) flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed. Make: Cera / Hindware / Johnson

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed . Make: Jaquar

PVC connection of 15mm bore and 450/600mm long with PTMT nuts, complete all as specified and as directed.

S & F in repair stainless steel tubular towel rail fixed with CP brass screws, complete all as specified and as directed. Make: Jaquar / Cera / Marc

S & F in repair CP soap dish, complete all as specified and as directed. Make: Jaquar / Cera / Marc

S & F in repair stainless steel tubular towel ring fixed with CP brass screws, complete all as specified and as directed. Make: Jaquar / Cera / Marc

S&F in repairs, bib tap, cast copper alloy with crutch or butter fly handle, CP fancy type screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs brass chromium plated shower rose (75 mm dia) suitable of size 15mm pipe with or without swivel joints fixing to steel pipes complete all as specified and as directed.

S&F in repairs stop valves, two way angular, CP long thread with flange, screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions, complete all as specified and as directed.

S&F in repairs, 20 mm bore, fancy type, cast copper alloy, globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs, 25 mm bore, fancy type, cast copper alloy, globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed .

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil, complete all as specified and as directed.

Removing of excavated material to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm dia of pipe complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) as in bed to 150 mm bore RCC drain pipe including forming cradles complete all as specified and as directed.

S & F 150 mm bore Reinforced cement concrete pipes, alingning & jointing with CM 1:1, one end socketed, socket & spigot end, class NP-2, laid in trenches and jointed complete all as specified and as directed.

Rolled mild steel sections of grade Fe - 410 - S as in main and cross beams, hip and jack rafters, purlins where connected to common rafters, fixed with angle cleats etc complete all as specified and as directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F in repairs brass hat & coat hooks, solid body, 175 mm to 250 mm

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC concealed conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with modular metal flush box of suitable size for mounting of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan / bell point controlled by one, one way switch, complete all as specified and directed .

All as per Serial Item No. 144 above but one 3/5 pin socket outlet 5/6 Amps on independent board, complete all as specified and as directed.

All as per Serial Item No.144 above but for one 3/5 pin socket outlet 5/6 Amps on the same board with other switches, complete all as specified and as directed.

All as per serial Item No.144 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire, complete all as specified and directed .

All as per serial Item No.144 above but for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire, complete all as specified and directed .

M&L Modular switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

M&L Modular switch piano, flush type, single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

S&F Modular bell push, flush type, 5 Amps, 230 Volts complete all as specified and as directed.

S&F Modular Bell ding dong AC 230 volt single pole complete all as specified and as directed.

M&Lsocket outlet 5 Amps 2-in-1, 3/5 pin 230V AC flush type, complete all as specified and directed. Make: Legrand / L&T / Schneider

M&L Modular socket outlet 6/16 Amps 2-in-1, 3/5 pin 230V AC flush type, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F Modular electronic fan regulator, stepped type, 100 W, AC, 230 Volts, complete all as directed. Make: Legrand / L&T / Schneider

S&F ceiling rose, 3 phase / PVC / Polycarbonate, isolated body complete all as specified and as directed. Make: Havells / Legrand / Schneider

S&F lamp Holder, insulated body with back plate, 230 Volts for batten fittings, complete all as specified and as directed.

Hanging only ceiling fan any size and connecting up including provision of cable from ceiling rose or connector to fan, including taking down old u/s fan complete all as specified and as directed. Note:- Ceiling fan will be issued under Sch 'B' iems.

Hanging only exhaust fan any size and connecting up including provision of cable from ceiling rose or connector to fan, including taking down old u/s fan complete all as specified and as directed. Note:- Exhaust fan will be issued under Sch 'B' iems.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, IP-42, 240V for fixing MCB's, including taking down old u/s DB's complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, IP-43, 240V for fixing MCB's, including taking down old u/s DB's complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, IP-43, 240V for fixing MCCB's, with 1 nos 100 Amp, 10 KA including taking down old u/s DB's complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F MCB SP ‘C’ Curve 10KA, 6 to 32 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB SPN ‘C’ Curve 10KA, 40 amps, 240 V complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB SPN ‘C’ Curve 10KA, 63 amps, 240 V complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB TPN ‘C’ Curve 10KA, 63 amps, 240 V complete all as specified and directed . Make:- Legrand / Havells / L&T

Fixing only LED batten fittings 20/22 watt, branded make such as Havells / Surya / Phillips / Bajaj etc. including 01 nos tube rod, complete all as specified and as directed Note:- Material shall be issued under Sch 'B' items.

S & F Decorative wall light made up of high grade unbreakable polycarbonate material suitable up to 9W LED lamp with B22 base including 9W LED lamp and taking down unserviceable light fittingcomplete all as specified and directed. Make :- Havells Cat Part No LHFOFWE1TZ1W012 or techno commercially equivalent model of make Bajaj/Philips/CG

S&F LED light fitting 1X10W bulk head luminaries, 6000K, with lamp holders with all accesories internally and connectiong up with twin core twisted flexible copper conductor of suitable size, complete all as specified and as directed. Make:- Havells cat part No LHEXCGP7IN5W013 or its equivalent in CG / Phillips / Wipro

Fixing only energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, LED street light luminaries 35 watt 5700K, fixed on pole incld. 1.60 mtr long 40 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mm x 6 mm with nuts, bolts & washers and conductor to fitting with 3 core 1.50 sqmm pvc insulated cable Note:- Material shall be issued under Sch 'B' items.

M&L in repair submain wiring with two runs of 6 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through including PVC rigid conduit concealing wall of 20 mm dia size with accessories fixed & concealing on wall / ceiling and connected to common earth dolly complete all as specified and directed. Note :- Two runs of 6 sqmm & one run 4 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

M&L in repair submain wiring with two runs of 4 sqmm with one run of 2.50 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through including PVC rigid conduit concealing wall of 20 mm dia size with accessories fixed & concealing on wall / ceiling and connected to common earth dolly complete all as specified and directed. Note :- Two runs of 4 sqmm & one run 2.50 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

M&L for single pole and neutral enclosure with 2 pin earth industrial plug and socket with one MCB SP 25 Amps including taking down old one complete all as specified and as directed.

M&L RCCB DP 63 amps, breaking capacity 30 mA 'C' curve conforming to IS/IEC 60898-1 2002, ntegrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 Hz including making necessary connection with suitable size of copper lugs etc,complete all as specified and as directed. Make:- Legrand Cat no. 408704 or its equivalent in ABB / Seimens.

Supply and fixing 4 Pole MCCB 100 Amps 25 KA, 415 Volt, thermal adjustable magnetic type, Ics=75% including sheet metal enclosure powder coated finish and fixed flush in wall including making good to distrubed surface etc complete. Make:- Legrand / Havells / L&T / ABB

Taking down and re-fixing only incld connection electric meter

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel including dismentling of existing earth pit etc complete all as specified and as directed. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M&L switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

M&L switch piano, flush type, single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

M&L socket outlet 5 Amps 2-in-1, 3/5 pin 230V AC flush type, complete all as specified and directed. Make: Legrand / L&T / Schneider

M&L socket outlet 6/16 Amps 2-in-1, 3/5 pin 230V AC flush type, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F electronic fan regulator, stepped type, 100 W, AC, 230 Volts, complete all as directed. Make: Legrand / L&T / Schneider

M&L LED integrated batten tube light fitting 1X20W indoor decorative aluminium extruded LEd batten integrated type complete with all accesories internally pre wired including tube rod and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Havells / Bajaj/ CG/ Philips

S&F LED light fitting 1X10W, 2 feet, decorative type,PVC extruded batten complete with retrofit T5 polycarbonate tube rod with connector block etc., complete with accessories pre- wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : CG cat no. DMLN1LTD8-16 & LED lamp cat no. LTT8-20 or its equivalent in Havells/ Bajaj/Philips/CG

S&F batten lamp holder,metal case body of brass, suitable for LED batten fitting 9W 230 volts complete all as specified and as directed .

Supply, Fix, connecting and testing of energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, LED street light luminaries 45 watt 5700K, fixed on pole incld. 1.60 mtr long 40 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mm x 6 mm with nuts, bolts & washers and conductor to fitting with 3 core 1.50 sqmm pvc insulated cable Make : Havells Cat Part No LHETAXU7PN6J045 or techno commercially equivalent model of make Bajaj/Philips/CG

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty solid aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 4 core 16 sqmm complete all as specified and directed

Note for all above items:- All items are for "Material and labour / Supply and fix" and to be executed in"Repairs" only incl taking down old materials unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are requested to quote their rates accordingly.

M/s Chawariya Enterprises

mahalaxmi enterprises

M/S KAUTILYA GARG