Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | ₹34.9 L Quoted ₹35.6 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹37.1 L+₹1.5 L (4.16%)Rejected-Finance 93 BAPUJI NAGAR ITC ROAD SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | ₹37.1 L+₹1.5 L (4.16%) | L2 | Rejected-Finance Not being L1 |
| 3 | L3₹39.7 L+₹4.0 L (11.3%)Rejected-Finance 800 RAM NAGAR ROORKEE DISTT HARIDWAR UK PIN 247667 | ROORKEE | HARIDWAR | UTTARAKHAND | 247667 | ₹39.7 L+₹4.0 L (11.3%) | L3 | Rejected-Finance Not being L1 |
| 4 | L4₹40.0 L+₹4.3 L (12.1%)Rejected-Finance 11 CIVIL LINES ROORKEE 247667 DISTT HARDWAR UK | HARIDWAR | UTTARAKHAND | 247667 | ₹40.0 L+₹4.3 L (12.1%) | L4 | Rejected-Finance Not being L1 |
| 5 | L5₹42.4 L+₹6.7 L (18.8%)Rejected-Finance 67 PATEL NAGAR NEW MANDI MUZAFFARNAGAR INDEX NO C 630 HQ CE WC | ₹42.4 L+₹6.7 L (18.8%) | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | sidh builders L3 | M/s Chitter Mal & Co. L6 | VERDHMAN ASSOCIATES L5 | Alankar Traders L4 | G.H. INFRASTRUCTURE PRIVATE LIMITED L2 | RAJESH KUMAR SANJAY GUPTA L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for preparing old surfaces of WALLS by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and as directed. | 1,200 | Sqm | 5 ₹6,000 Lowest | 5 ₹6,000 Lowest | 5 ₹6,000 Lowest | 5 ₹6,000 Lowest | 5 ₹6,000 Lowest | 6 ₹7,200 |
| 2.00 | All as per item No 01 here-in-before but for old ceiling surfaces | 800 | Sqm | 5 ₹4,000 Lowest | 5 ₹4,000 Lowest | 6 ₹4,800 | 5 ₹4,000 Lowest | 5 ₹4,000 Lowest | 7 ₹5,600 |
| 3.00 | M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of oil bond distemper emulsion by using rollers complete all as specified and directed. | 3,000 | Sqm | 15 ₹45,000 | 12 ₹36,000 | 14 ₹42,000 | 10 ₹30,000 Lowest | 11 ₹33,000 | 12 ₹36,000 |
| 4.00 | M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying 1 mm thick white cement base wall care putty to obtain smooth finishes by sand papering complete all as specified and as directed at site by Engineer-in-Charge. | 5,000 | Sqm | 20 ₹1,00,000 Lowest | 25 ₹1,25,000 | 36 ₹1,80,000 | 30 ₹1,50,000 | 34 ₹1,70,000 | 25 ₹1,25,000 |
| 5.00 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/chajja. , of approved make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.
Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction to the satisfaction of Engineer in charge before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted.
(ii). The work must got executed through authorised applicator of reputed paint manufacturer by concluding MOU with manufacturer and guaranteed for a minimum period of 3 Years by the manufacturer as approved by GE.
(iii). The complete qty of material to be incorporated in the work shall be brought by contractor to MES store yard of the time of commencement of work which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.
(iv). After carrying out preparation of surface the same shall be got approved from GE before application of paint for each building.
(v). The colour / shade will be all as approved by GE
(vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor & the height of the bldg shall be upto 15m..
(vii) The application of acrylic paint/ cement base paint shall be with fully automatic airless spray machine with a flow speed of min 1 litre per menulte having pressure of 3300 PSI by allowing 6 to 8 hr to dry the surface before painting of subsequent coat..
(ii) The Newly /old plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of material. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. | 11,900 | Sqm | 70 ₹8,33,000 | 110 ₹13,09,000 | 60 ₹7,14,000 | 60 ₹7,14,000 | 54 ₹6,42,600 | 51 ₹6,06,900 Lowest |
| 6.00 | M&L for preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed by Engg in charge. | 1,000 | Sqm | 15 ₹15,000 Lowest | 25 ₹25,000 | 23 ₹23,000 | 20 ₹20,000 | 36 ₹36,000 | 25 ₹25,000 |
| 7.00 | M&L for preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed by Engg in charge. . | 1,500 | Sqm | 15 ₹22,500 Lowest | 25 ₹37,500 | 23 ₹34,500 | 20 ₹30,000 | 36 ₹54,000 | 25 ₹37,500 |
| 8.00 | M&L for writing letters/Bldg Nos or figures(Block, Roman or Indian) on wall 10cm height using synthetic enamel paint white or circular /black painted, black back ground complete all as specified and directed. | 30 | Per Ten Nos per cm of height | 101 ₹3,030 | 100 ₹3,000 Lowest | 100 ₹3,000 Lowest | 150 ₹4,500 | 200 ₹6,000 | 120 ₹3,600 |
| 9.00 | M & L for Stops, commans, short lines, dashes, hyphens, brackets, etc.with synthetic enamel paint to match existing work complete all as directed. | 10 | Per Ten Nos | 100 ₹1,000 | 100 ₹1,000 | 100 ₹1,000 | 150 ₹1,500 | 80 ₹800 Lowest | 150 ₹1,500 |
| 10.00 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces [ internal / external ] including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side A 1 MD land complete all as specified and as directed. | 1,200 | Sqm | 10 ₹12,000 Lowest | 10 ₹12,000 Lowest | 50 ₹60,000 | 10 ₹12,000 Lowest | 12 ₹14,400 | 25 ₹30,000 |
Tender Value
₹66 L
EMD Value
₹1.2 L
Closing Date
3 Jul 2025, 6:00 pmClosed
CWE No 2 Meerut
Headquarters Commander Works Engineer No 2 Military Engineer Services Boundary Road, Near Supply Depot Meerut Cantt-250001
SMART PERIODICAL REPAIR/ REPLACEMENT TO ROOF SHEET AND ROOF TREATMENT TO CERTAIN BLDGS IN ZONE VII AND VIII OF AGE B/R-II UNDER GE ROORKEE
2025_MES_705225_1
95355/RKE/E8
Open Tender
Civil Works
Item Rate
180 days
Roorkee
Please refer tender pages
9 documents required · 9 mandatory
₹1,000
GE Roorkee
₹1.2 L
9 Sept 2025
24 Apr 2025
5 Jul 2025
24 Apr 2025
3 Jul 2025
19 Jun 2025
Amount
M&L for preparing old surfaces of WALLS by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and as directed.
All as per item No 01 here-in-before but for old ceiling surfaces
M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of oil bond distemper emulsion by using rollers complete all as specified and directed.
M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying 1 mm thick white cement base wall care putty to obtain smooth finishes by sand papering complete all as specified and as directed at site by Engineer-in-Charge.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/chajja. , of approved make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction to the satisfaction of Engineer in charge before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must got executed through authorised applicator of reputed paint manufacturer by concluding MOU with manufacturer and guaranteed for a minimum period of 3 Years by the manufacturer as approved by GE. (iii). The complete qty of material to be incorporated in the work shall be brought by contractor to MES store yard of the time of commencement of work which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of paint for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor & the height of the bldg shall be upto 15m.. (vii) The application of acrylic paint/ cement base paint shall be with fully automatic airless spray machine with a flow speed of min 1 litre per menulte having pressure of 3300 PSI by allowing 6 to 8 hr to dry the surface before painting of subsequent coat.. (ii) The Newly /old plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of material. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed by Engg in charge.
M&L for preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed by Engg in charge. .
M&L for writing letters/Bldg Nos or figures(Block, Roman or Indian) on wall 10cm height using synthetic enamel paint white or circular /black painted, black back ground complete all as specified and directed.
M & L for Stops, commans, short lines, dashes, hyphens, brackets, etc.with synthetic enamel paint to match existing work complete all as directed.
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces [ internal / external ] including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side A 1 MD land complete all as specified and as directed.
M&L for Rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 5mm thick on concrete surfaces of ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering to external surfaces of brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, surfaces finished even and smooth without using extra cement including mixing water proofing compound complete all as specified and as directed. Note Water proofing compound shall be measured and paid separately under relevant item.
Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed.
M&L for preparation of newly plaster/unplastered surface of wall applying 2 mm thick layer of wall care putty of approved quality to obtain smooth finishes surfaces and applying two coat of oil emulsion distemper using rollers on walls over a coat of primer complete all as specified and directed
M&L preparation of new plastered of exterior/Interior wall/Ceiling of projection/chajja for applying 1 mm thick white cement base wall care putty to obtain smooth finishes complete all as specified and directed.
M&L for newly plaster/unplastered surface on walls/ceiling surfaces by washing, rubbing down and stopping of painted surfaces and applying two coat of cement base paint complete all as specified and as directed.
M&L for Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.
Demolition of brick work in built in cement mortar for cracked wall of compound wall and similar work complete all as specified & as directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM (1:6), complete all as specified & as directed.
M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.
M & L for GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required and including taking down complete all as specified complete all as specified and directed.
M & L for GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified including taking down complete all as specified complete all as specified and directed.
Fixing only 15/20 mm bore tubes and connections medium grade in new or old position to walls, ceiling or laying in floors including taking up or down existing tubing complete all as specified and directed
Taking down old existing water proofing treatment from the top of RCC roof / arch slab, hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed
Dismantling of Brick tiles or terracing tiles, single layer on roofs, kerbs, aprons, etc. (each layer) and removal of rubbish out of defence land complete all as specified and directed.(Note : All roots of plant on either on wall or roof to be removed and making good the disturbed surfaces. The rate quoted be the contractor is deemed to be included in the unit rates.)
Demolition of Mud Phuska in roofs,any thickness including plastering and leeping of any thickness upto 30cm deep complete all as specified and directed.(Note: All roots of plant on either on wall or roof to be removed and making good the distributed surfaces. The rate quoted by the contractor is deemed to be included in the unit rates including removal of mud phuska outside defence land.)
M&L for cleaning of concrete or plastered roof surfaces and applying priming coat using bituminous primer @ 0.30 kg per sqm followed evenly a tack coat @ 1.2 Kg per sqm using 85/25 grade industrial hot blown bitumen over it laid 3 mm thick APP modified polymeric water proofing membrane minimum weight 3.00 Kg per sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) rolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instruction and applying over it a tack coat using industrial hot blown bitumen 85/25 grade @ 1.20 Kg per sqm and finally finished the top of polymeric water proofing membrane complete all as specified and directed. Note:- All the water proofing treatment works shall be got carried out through authorised applicator of the firm. In this regard prior written approval from GE shall be obtained
Material and labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 2% by weight of cement finished even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified and directed
M&L for Cement concrete type B1-1:2:4 (using 20 mm graded crushed stone agg) as in copping, benching of manhole / drain slightly rounded or chamfered angles and throating, roof kerbs or mud stop, PCC pading etc complete all as specified and directed
M&L for 40mm thick brick tiles laid on 15mm rhick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on RCC surface complete complete all as specified and directed.
All as per item 31.00 above but except material complete.
Disconnecting existing PVC/RCC water tanks exc 500 lts n.exc 1000 ltrs capacity ,setting aside (or lowering if required ) for repair, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and refixing in position complete all as specified and directed.
S&F in repair rotational moulded polythylene, triple layer water storage tank 500 litre capacity (cylinder vertical with closed top), hoisted & fixed in position all as specified in SSR Part-I and 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete, including dismantling existing RCC/PVC water storage tank and removal from site complete.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed.
S&F powder coated Everest ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm , cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F of 4 mm thick everest designer ceiling board/tiles for insulation 595 x 595 mm size fixed with steples on snap grid as in ceiling complete all as specified and directed
All as per item No 36 above but except material.
Dismantling asbestos cement corrugated or semi corrugated sheet in roof and removal from site for taking into schedule of credit complete all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating (Al/Zn 150 gms/sqm) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating (Al/Zn 150 gms/sqm) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge or valley gutter, fixed with self tapping screws complete all as specified & directed.
S&F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. quality conforming to FE 410 WA (Gde E-250 quality A) (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified & directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specfied.
Dismantling timber scantlings , rails, posts rafters, purlins etc n.exc 40 sq. cm in section, in any position complete all as specified
M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth, any description not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, single socketed in any length with rubber ring joints fixed to walls with and including all necessary fittings such as bend, tee, junctions, cowl etc, including takingdown old PVC/CI/RCC Pipe etc complete.
All as per item No 44 above but for 75mm bore (dia).
M&L for Nano Water Base Elastomeric Finish two Coats over and above on cost on Nano Water Base Elastomeric primer not containing toxic materials like Pb, Cr, An, biocides/ organocides, having defect- free nano particles with inhibiting characteristics having bacteria killing rate above 40% and high anti-fingal properties, with super-hydrophobic properties with contact angle of water more than 750, with elongation (stretch ability) of more than 300% in a Nano- structured self assembled dispersion system with VOC level of less than 1%, 40 micron DFT of top coat, including scaffolding, surface preparation, cleaning etc. Complete as per specification and as directed.
G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3337587)
sidh builders (BID ID -3337729)
Alankar Traders (BID ID -3345062)
VERDHMAN ASSOCIATES (BID ID -3338173)
M/s Chitter Mal & Co. (BID ID -3338070)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .