REPAIR TO ALL TYPES OF MAP FURNITURES INCLUDING PAINTING AND POLISHING AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: Furniture Items

Repair to Hard Bed

Taking down old unserviceable plywood from the existing hard bed and S&F new 12mm thick phenol bonded commercial ply BWR grade with edging (unpolished) placed on top of 25x25mm supports as per existing size as shown in drg, shall be approved quality complete all as specified and directed by engineer-in-charge.

Taking down old unserviceable head board from the existing hard bed and S&F new head board of size 630x190mm made of 18 mm thick both side prelaminated particle board with PVC edging 2mm thick duly hot machine pressed all around all as shown in drg, shall be approved quality complete all as specified and directed by engineer-in-charge.

Taking down old unserviceable foot board from the existing hard bed and S&F new foot board of size 630x300mm made of 18 mm thick both side prelaminated particle board with PVC edging 2mm thick duly hot machine pressed all around all as shown in drg, shall be approved quality complete all as specified and directed by engineer-in-charge.

Supply & fixing new hard rubber shoes/nylon buffers including removing of old UNSV rubber shoes from leg of hard bed all as specified and directed by engineer-in-charge.

Painting of Hard-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with putty, (Internally /externally) than applying two coats spray painting of synthetic enameled black paint over a coat of primer complete all as on drg & directed by engineer-in-charge.

Repair to Bin linen multipurpose

Taking down old unserviceable shelves from the existing multipurpose and S&F new shelves made of 18mm thick pre-laminated particle board BWR grade as per existing size as shown in drg, complete all as specified and directed by engineer-in-charge.

Taking down old unserviceable shutters from the existing multipurpose and S&F new shutters made of 18mm thick pre-laminated particle with magnetic catcher. The shutters shall be provided with 6mm thick teakwood beadig & handle shall be 100mm long made of brass as shown in drg, complete all as specified and directed by engineer-in-charge.

Taking down old unserviceable drawers from the existing multipurpose and S&F new drawers made of 18mm thick pre-laminated particle as per existing size as shown in drg, complete all as specified and directed by engineer-in-charge.

Taking down old unserviceable sides from the existing multipurpose and S&F new sides made of 18mm thick pre-laminated particle as per existing size as shown in drg, complete all as specified and directed by engineer-in-charge.

Taking down old unserviceable back from the existing multipurpose and S&F new back made of 12mm thick phenol bonded commercial ply BWR grade as per existing size as shown in drg, complete all as specified and directed by engineer-in-charge.

Taking down old unserviceable bottom from the existing multipurpose and S&F new bottom made of 19mm thick teakwood as per existing size as shown in drg, complete all as specified and directed by engineer-in-charge.

Taking down old unserviceable stiffners from the existing multipurpose and S&F 25mmx25mm new teak wood stiffners made as per existing size as shown in drg, complete all as specified and directed by engineer-in-charge.

Supply & fixing new hard rubber shoes/nylon buffers including removing of old UNSV rubber shoes from stiffners of multipurpose all as specified and directed by engineer-in-charge.

15. M & L for removal of existing polish from wooden surfaces of under mentioned articles of wooden furniture, cleaning the same using sand paper, smoothing properly without leaving any untouched woooden & french polished with glossy finish

Repair to Chair Computer

Taking out old unserviceable broken seat from chair computer without damaging the adjacent parts of chair computer and supply and fixing new seat shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken back from chair computer without damaging the adjacent parts of chair computer and supply and fixing new back shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken pedestal from chair computer without damaging the adjacent parts of chair computer and supply and fixing new pedestal shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken arm rest (Handle)from chair computer without damaging the adjacent parts of chair computer and supply and fixing new handle shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken twin wheel castors from chair computer without damaging the adjacent parts of chair computer and supply and fixing new twin wheel castors shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken hydraulic up and down gas lift cylinder from chair computer without damaging the adjacent parts of chair computer and supply and fixing new hydraulic up and down shall be approved quality complete all as shown on drawing.

Repair to Chair dining with cushion

Removing of existing old unservicavle broken seat including 12mm thick commercial ply and supply and fixing new seat of 12mm thick BWR grade commercial ply duly fixed with 75mm thick 40 kg per cubic metre density 480x400mm foam with best quality tapastry of approved shade and texture as per sample complete all as shown on drawing.

Supply and fixing new 1st class teak wood vertical strips of size 15x30mm by removing the existing broken complete all as per drawing specified and as directed at site.

Supply and fixing new 1st class teak wood stiffeners in the bottom of legs of size 20x25mm by removing the existing broken complete all as per drawing specified and as directed at site.

Supply and fixing new 1st class teak wood legs of size 35x40mm by removing the existing broken complete all as per drawing specified and as directed at site.

Supply and fixing new 1st class teak wood rails of size 25x65mm by removing the existing broken complete all as per drawing specified and as directed at site.

Supply and fixing new 1st class teak wood side frames of size 30x40mm by removing the existing broken complete all as per drawing specified and as directed at site.

Supply and fixing new plastic hard rubber shoe/nylon buffers by removing the existing broken complete all as per drawing specified and as directed at site.

M & L for removal of existing polish from wooden surfaces of chair dining with cushion by cleaning the same using sand paper, smoothing properly without leaving any untouched woooden surfaces, removing the stains and rectifying the cracks and dents with filling material like glue, bees wax resin etc and the same with two or more coats of French polish with glossy finish of appropriate shade, as approved / directed by the Engineer-in-Charge:-

Repair to Chair Writing

Taking out old unserviceable broken seat from chair writing without damaging the adjacent parts of chair writing and supply and fixing new seat shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken back rest from chair writing without damaging the adjacent parts of chair writing and supply and fixing new back rest shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken arm rest (handle)from chair writing without damaging the adjacent parts of chair writing and supply and fixing new arm rest shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken rubber stopper from chair writing without damaging the adjacent parts of chair writing and supply and fixing new rubber stopper shall be approved quality complete all as shown on drawing.

Maintenance & labour for repair to MS tubular frame from by welding chair writing of required length (100 to 200 mm) of MS tubular tube without damaging the adjacent parts of chair writing frame made out of 25mmx10mm section shall be approved quality complete all as shown on drawing.

Repair to Rack Three Tiers (Steel)

Removing of old unserviceable broken vertical angle iron of steel rack three tier and S&F new vertical angle iron of 40x40x4mm of steel rack six tier complete all as shown on drawing and as directed by engineer-in-charge.

Removing of old unserviceable broken top,bottom & shelves and S&F new top/bottom of 1mm thick mild steel sheet complete all as shown on drawing and as directed by engineer-in-charge.

Removing of old unserviceable broken sides and S&F new sides of 1mm thick mild steel sheet complete all as shown on drawing and as directed by engineer-in-charge.

Removing of old unserviceable broken back and S&F new back of 1mm thick mild steel sheet complete all as shown on drawing and as directed by engineer-in-charge.

Removing of old unserviceable broken angular bracket and S&F new angular bracket of 75mmx75mm, 3mm thick mild steel sheet complete all as shown on drawing and as directed by engineer-in-charge.

Painting of Rack Three Tiers (Steel) :-Preparation of surfaces i.e removing old paint, derusting, filliing all holes and cracks or detoriated spots of old painted steel furniture with putty, (Internally /externally) than applying two coats of spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/olive green over a coat of primer as approved by AGE(I), complete all as directed by engineer-in-charge.

Repair to Rack Six Tiers (Steel)

Removing of old unserviceable broken vertical angle iron of steel rack six tier and S&F new vertical angle iron of 40x40x4mm of steel rack six tier complete all as shown on drawing and as directed by engineer-in-charge.

Removing of old unserviceable broken top, bottom & shelves and S&F new top/bottom of 1mm thick mild steel sheet complete all as shown on drawing and as directed by engineer-in-charge.

Removing of old unserviceable broken sides and S&F new sides of 1mm thick mild steel sheet complete all as shown on drawing and as directed by engineer-in-charge.

Removing of old unserviceable broken back and S&F new back of 1mm thick mild steel sheet complete all as shown on drawing and as directed by engineer-in-charge.

Removing of old unserviceable broken angular bracket and S&F new angular bracket of 75mmx75mm, 3mm thick mild steel sheet complete all as shown on drawing and as directed by engineer-in-charge.

Painting of Rack Six Tiers (Steel) :-Preparation of surfaces i.e removing old paint, derusting, filliing all holes and cracks or detoriated spots of old painted steel furniture with putty, (Internally /externally) than applying two coats of spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/olive green over a coat of primer as approved by AGE(I), complete all as directed by engineer-in-charge.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.

M/S NIYATI NETWORK (BID ID -3079555)