Resurfacing of Navamatravad to Umrala Road (NP) Km.0/000 to 1/650 Ta. Jamkandorana, Dist.; Rajkot (Package No.RAJ/MMGSY/BUJ/2025-26/P.44)

Name of work :- Resurfacing of Navamatravad to Umrala Road (NP) Km.0/000 to 1/650 Ta.

Jamkandorana, Dist.; Rajkot (Package No.RAJ/MMGSY/BUJ/2025-26/P.44)

BILL OF QUANTITIES

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

1 Clearing and grubbing of road land 0.29 One 28455.09

incl.uprooting rank vegetation, grass, Hect.

bushes, shurbs, saplings and trees girth upto

300mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials © By mechanical means in area of

2 Earthwork for embankment including 625.30 One 165.42

breaking clods, dressing with all lead and lift Cum

(Excluding watering and consolidation) (A)

Selected soil should be From borrow area

with all lead and lift and should have CBR

not less than 6.00%.

3 Box cutting the road surface to proper slope 586.80 One 114.44

and camber for making a base for road work Cum

including removing the excavated stuff and

depositing on the road side slopes as

directed upto all lead.

4 Earthwork in cutting in all sorts of soil and 525.50 One 140.87

soft Murrum including conveying and Cum

spreading the suff embankment as and

where directed within 200 meters from the

end of the cutting with all required lead and

5 Scarifying graveled macadam or Bitumen 1181.30 One 43.58

macadam surface 6cm to 10cm depth Sqm

including stacking useful materials on road

side and disposing off remaining stuff.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

6 WBM Grading-1 380.70 One 1471.46

Providing, laying, spreading and compacting Cum

stone agg. Of 90mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

1 as per Technical Specification Clasue.405

By menual means.

7 WBM Grading-2 507.50 One 1359.35

Providing, laying, spreading and compacting Cum

stone agg. Of 63mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

2 as per Technical Specification Clasue.405

By menual means.

8 Rolling and Watering of earthwork with 711.90 One 23.41

vibratory roller including filling in Cum

depression which occur during the process

and as directed.

9 Providing and laying bitumenous grout 257.00 One 2198.46

37.50mm thick using bulk Emulsion RS1 for MT

tack coat at the rate of 2.50kg/10sqm on

Bitumin surfacer and using BT chips for

required gradation with the asphalt of grade

VG-30 at the rate of 1.99% i.e 19.90kg/MT by

weight of mix including heating and mixing

in drum mix plant , transporting the mix and

spreading the same by paver finisher and

consolidation as per MOST specification

including cost of all materials fuel, labours,

tools and plants etc. using contractor's own

drum mix plant etc. complete.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

10 Providing, laying and rolling 37.50mm thick 282.00 One 2725.48

compacted bitumenous Macadam (B.M.) in MT

one layer with B.T. aggregates as specified

and using Emulsion RS1 for tack coat at the

rate of 2.50kg/10sqm (As per IRC-16) and

using bitumen for mixing with agg. at the

rate of 3.40% i.e 34.00kg/MT of total mix

including mixing in Drum mix plant and

spreading the same by paver finisher and

consolidation with vibratory roller including

necessary including cost of hire charges,

firewood, oil, lubricants, labour charges, etc.

by using constractor's own Drum mix plant,

machineries and equipment, tools etc.

complete in accordanace with the

requirement of sepcification.

11 Providing and laying and rolling of 20mm 158.00 One 3245.63

thick Compacted mix seal surface with B.T. MT

and aggregate as spedified using bitumen

for mixing with aggregate at the rate of

5.10% i.e 51.00Kg/MT of total mix including

heating and mixing in drum mix plant and

spreading the same by paver finisher and

consolidation with vibratory roller including

necessary firewood, oil, lubricants, labour

charges using contractor's own drum mix

plant, machineries and equipment, tools etc

including flushing of sand 0.27cum/10sqm

etc. complete in accordance with the

requirement of spefication.

12 Excavation for foundation upto 1.5m depth 290.30 One 265.97

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (B) Dense or hard soil.

13 Excavation for foundation upto 1.5m depth 232.20 One 453.20

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (C) Hard Murrum

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

14 Providing and casting in situ ordinary 695.40 One 3935.98

cement concrete M-150 mix and providing Cum

necessary pin headers including shuttering,

scafilding, laying vibrating, curing and

finishing complete Without V-Grooves For

15 Providing and filling in foundation with 52.50 One 3359.92

ordinary cement concrete M-100 mix and Cum

providing necessary vertical pin headers

incl. Formwork, vibrating, ramming and

curing complete.

16 Dry Lean Cement Concrete Sub base 181.90 One 2554.08

(Construction of dry lean cement concrete Cum

Sub- base over a prepared sub-grade with

coarse and fine aggregate conforming to IS:

383, the size of coarse aggregate not

exceeding 25 mm, aggregate cement ratio not

to exceed 15:1, aggregate gradation after

blending to be as per table 600-1, cement

content not to be less than 220 kg/cum,

optimum moisture content to be determined

during trial length construction, concrete

strength not to be less than 10 Mpa at 7 days,

mixed in a batching plant, transported to

site, laid with a paver with electronic sensor,

compacting with 8-10 tonnes vibratory roller,

finishing and curing.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

17 Cement Concrete Pavement M-25 364.00 One 6560.96

(Construction of un- reinforced, dowel Cum

jointed, plain cement concrete pavement

over a prepared sub base with 53 grade

cement @ 380 kg per cum, coarse and fine

aggregate conforming to IS 383, maximum

size of coarse aggregate not exceeding

mm, mixed in a batching and mixing plant as

per approved mix design, transported to site,

laid with a fixed form or slip form paver,

spread, compacted and finished in a

continuous operation including provision of

contraction, expansion, construction and

longitudinal joints, joint filler, separation

membrane, sealant primer, joint sealant,

debonding strip, dowel bar, admixtures as

approved,curing compund finishing the

lines and grade as per drwaing.

18 Providing and casting in situ Contolled 232.50 One 5247.13

cement concrete- M-200 for average Cum

75/150mm thick wearing coat laid as

directed incuding. tamping, vibrating,

finishing, curring and filling in joints with

bitumen complete.

19 Providing and laying weep hole in 266.00 One 90.82

Abutment and returns by using A.C pipe of No

100mm. Incl. fixing in proper grade and

jointing the complete as per detailed

20 Providing and laying in Position FE - 4.310 One 73858.69

500/500D TMT bar reinforcement including MT

cutting, bending, hooking and tying

complete as per detailed drawings for the

following (A) Piers (B) Abutments (C)

Returns (D) Walls etc.

21 Providing and Fixing in position FE- 4.330 One 73243.01

500/500D TMT bar reinforcement including MT

cutting, bending, hooking, and tying

complete as per detailed drawaing (A)RCC

kerb (B) RCC Footpath (B) RCC Solid Slab/

App. Slab / Wearing coat.

22 Providing and fixing Precast cement concrete 6.00 One 356.49

Hectometer as per IRC type design incl. No

painting, lettering etc. fixing in C.C. 1:5:10.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

23 Providing and fixing Precast cement concrete 180.00 One 350.80

Guard stone as per I.R.C. type design No

including white washing etc. complete.

Fixing in C.C.1:5:10.

24 Providing and fixing ordinary Kilometer 2.00 One 704.33

stone of pre-cast C.C. 1:2:4 including No

necessary reinforcement as per I.R.C. type

design in C..C. 1:4:8 including painting

lettering etc. complete. (For ODR, VR)

25 Providing and fixing Indicator stone of 75.00 One 102.84

approve stone as per I.R.C. type design in No

C.C. 1:4:8 including white washing etc.

complete Fixing in Earth

26 Providing and fixing Flood guage post mark 6.00 One 1147.36

of 'C' angle size 100mm x 50mm x 6mm thick No

(in head wall 0.500mt. And 1.50mt. Out side

with painting and lettering with redeum

color as directed.

27 Village/Bump Ahead sign. : Providing and fixing 7.00 One 5045.36

sign boards made out of 2mm Aluminium sheet size No

90x60 cms. Rectangle as per the design of IRC-67-1977

pre treated with phospheting process and acid etching

coated with one coat of apoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest MOST specification

letter and numbers should be as per IRC:30-1968,

Mt. long (2 nos) stand post and frame fabricated from

suitable size iron angle of 50x50x5mm, painted with

best quality epoxy coating in black and white bends,

the details of symbole on inscription/ numerals for

each board shall be as per the instruction of the

Engineer in charge. The fixing at site shall be in C.C

1:2:4 block of size 45x45x60cms. for each leg including

excavation curring etc. complete under the

supervision of engineer in charge (A) Engineer Grade.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

28 Hazard Marker sign : 8.00 One 2423.73

Providing and Fixing sign boards made out of 2mm No

aluminum sheet : size 90*30 cms. rectangle as per

design / Drawing attached (IRC). Pretreated with

phospheting process and acid etching : coated with

one coat of epoxy primer and two coats of best

quality epoxy paint: reflectorised with retro reflective

sheeting as per latest M.O.S.T specification: 3.1 M.

long (2 nos) stand post and frame fabricated from

suitable size iron angle of 35*35*3mm and 50*50*5mm

: painted with best quality epoxy coatings in black and

white bends the details of symbole or inscription /

numerals for each board shall be as per the instruction

of engineer in charge the fixing at site shall be in 1:2:4

CC block of size 45*45*60 cms for each leg: including

excvation curing etc. comp.under the supervision of

engineer-in-charge.(B) Engineering Grade

29 Chevron sign :-Providing and fixing sign boards made 6.00 One 4681.35

out of 1.5mm aluminium sheet / 3mm ACP No

(Aluminum composite Panel); size 60x50 cm as per

design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.3 mtr long stand post

of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of

50 x 50 x 5mm; painted with bestquality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall

be as per the instruction of engineer in charge.The

fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective

sheeting from originaa manufacturer & a certified

copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

30 Direction sign (Junction board):-Providing and fixing 2.00 One 14831.70

sing boards made out of 2mm aluminium sheet; size No

244 x 122cms. rectangle as as per the design of IRC-67-

1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint; reflectorised with

retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x

5mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including excavation

curing etc. complete under the supervision of engineer

in charge.(A) Engineer Grade(VR)...

31 Cautionary Warning Sign : Providing and fixing sign 6.00 One 3808.65

boards made out of 2mm Aluminium sheet size No

90x90x90 cms. Equilateral treangle as per the design of

IRC-67-1977 pre treated with phospheting process and

acid etching coated with one coat of apoxy primer and

two coats of best quality epoxy paint reflectorised

with retro reflective sheeting as per latest MOST

specification 3.1 Mt. long stand post and frame

fabricated from suitable size iron angle of

35x35x3mm, 75x75x6mm. as required painted with

best quality epoxy coating in black and white bends

the details of symbole for each board shall be as per

the instruction of Engineer in charge the fixing at site

shall be in 1:2:4 CC block of size 45x45x60cms. for

each leg including excavation curring etc. complete

under the supervision of engineer in charge (A)

Engineering Grade.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

32 Citizen's information Board. Providing and fixing of 1.00 One 7393.20

typical MMGSY information board as per instruction. No

Two MS sheets of 3 mm thick, of 900 mm x 750mm

size fixed at top & bottom duly rivetted with MS

angles of 25 x 25 x 5 mm thick M.S angle shall be

welded by two vertical M.S angle of 5 mm thick to

mm x 75 mm of 12 SWG square tubes posts duly

embedded in cement concrete M-15 grade blocks of

600mm x 600mm x 750mm, below ground level. The

letters & figure of any shade reflectorised with High

Intensity Prismatic Grade Retro Reflective Sheeting of

Type-4 as per ASTM D-4956 and latest MORD

specifications; All sections of framed posts and steel

tube will be painted with primer and two coats of

epoxy paints as per drawing Clause 1701 and

Annexure 1700.1 (10.16). (A) Class-B High intensity

Grade Retro Reflective sheeting.

33 MMGSY "LOGO" Board : Providing and fixing of 1.00 One 4957.36

MMGSY LOGO informatory sign board with Logo as No

per section 1700 of MORD specifications and drawing.

The board will be a composite unit consisting of Two

Plates of ACM (Aluminum Composite Material),

material specifications as per clause 17001.3. The top

most plate will be of 3mm ACP in diamond shape of

600x600mm size, riveted with MS angle iron frame of

25mmx25mmx5mm size on back on edges. The Lower

plate will be of 4mm ACP of 1100x300mm size riveted

with MS angle iron frame of 25mmx25mmx5mm size

on back on edges. Riveting of all the sheets over angle

and flat iron frame will be done neatly to have plain

surface on one side. The angle iron frame of Both the

plates will be welded to a 75mm x75mmx6mm Mild

steel post at Centre and this post will be embeded in

cement concrete M15 grade block of 450x450x600mm

below ground level. The height of the bottom of the

lower plate will be 1200mm from normal ground

level. The spacing between the diamond shaped plate

and Lower Plate is kept 150mm. MMGSY logo, letters

and numerals on the ACM should be made up of

Retro Reflective sheeting of Type-1 AEGP Class-A

grade as per the latest MORD section 1700 and IRC 67-

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

34 Road Marking with Hot Applied paints with 347.00 One 367.72

reflectorising glass beads on bitumin surface Sqm

providing and laying a hot applied thermoplasting

compund 2.5mm thick including reflectorising glass

beads @250 gm per sq.mtr area, thickness of 2.5mm is

excluding of surface applied glass beads as per IRC:35-

2015 the finished surface to be level, uniform and free

from streaks and holes, zebra

patta/bump/centerline/edge line/ cut patta. the

while color marking should provide liminance

coefficient on cement road shall be min.

mcd/m2/lux and asphalt road shall be min

mcd/m2/lux during the survice life during the date

the marking should meet the performanace criteria for

night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-

2015 warranty for retroreflectivity shall be two years.

35 Cate eye / road stud/ RPM : Supplying 220.00 One 326.23

Raised Pavement markers of polycarbonate No

and ABS moulded body and reflective panels

with micro prismatic lens (No glass bead

lens) capable of providing total internal

reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested

in accordanace to ASTM D 4280 type H and

complying to specification of category A of

MORTH circular No RW/NH/33023/10-97-

DO III Dt. 11-06-1997. the height, width and

length shall be exeed 20mm, 130mm and

130mm and with minimum reflective area of

13sqcm on each side and the slope to the

base shall be 35+/-5 degree. the body of the

marker should having finger grip for easy

and accurate placement and application with

epoxy /bituminous adhesive as

recommended by the manufacturer of the

marker. the colour of the marker should be

as per the IRC:35-2015 and as directed by

Engineer-in-charge.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

36 Providing and erecting a "W" metal crash 136.00 One 3723.46

barrier comprising of 3mm thick currugated Rmt.

sheet metal beam rail, 70cm above

Road/Ground level, fixed on ISMC series

channel vertical post, 150x75x5mm spaced

2m center to center, 1.8m high, 1.1m below

ground/road level, all steel parts and

fitments to be galavanized by hot dip

process, all fittings to conform to IS:1367 and

IS:1364 metal beam rail to be fixed on the

vertical post with a spacer of channel section

150x75x5mm, 330mm long complete as per

Rupees One Crore Twenty One Lakh(s) Eighty Thousand Four Hundred Sixty Six

And Paise Fifty One Only

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent

( Should be written in figures and words ) of the estimated rate mentioned above. Amount of My

\ Our tender works put as under.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division