RDSD/RAMGARH/19/2021-22

Amount

Tata sheet

Drainge Chanels by mascot

Providing and fixing Coat Hook of approved quality.

Providing fixing testing and commissioning of cp brass 115/63 mm long shower ARM with wall flange and pressure adjustable Shower Rose complete with wall accessories as requried and making good the walls whereever required.

Providing fixing testing and commissioning of cp brass 63 mm long pressure adjustable complete with wall accessories as requried and making good the walls whereever required.

Supplying,Storing,handling,shifting,installation,testing and commissioning of CP flxible hose, spary wall flange etc.complete

Providing and fixing straight type macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of Mcalpine,UK with intergral single mould sealing fins made of flexble EVA body,including bush/adoptor for use with C.I Pipe as supplied with the pan connector.

Synthetic Race Court

GOAL POST

16 M HIGH MAST 8 Fittings

Supply of 16 M high mast shaft in two sections suitable for wind speed 50m/sec. with head frame, luminaries carriage suitable to install 8 nos. luminaries in symmetrical arrangement, lightning finial along with the other accessories like double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box etc.

Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates

Supply of Twin dome aviation obstruction light TLL Make APUS 3.0 LED

ERECTION WORK

Erection & commissioning of the 16M high mast with the help of suitable equipments

Design & casting of suitable shallow foundation with M-20 concrete for the 16M high mast considering the safe soil bearing capacity at site 10T/sq.mm at 2 metre depth

Light fittings

Supply of Transrail lighting limited make 200W LED flood light fittngs, CRI:70, CCT: 5700K, SPD 4KV, 100LPW

Supply of Transrail lighting limited make 240W LED flood light fittngs, CRI:70, CCT:5700K, SPD 4KV, 100LPW

Supply of 7M hot dip galvanised Octagonal pole with 70mm top dia.A/F, 130mm bottom dia. A/F, 3mm thick HT sheet, 200X200X12mm base plate without bracket arm.

Supply of 1000MM long SINGLE arm standard bracket made of 48.3MM dia. Pipe

Supply of M20X600mm long TS-600 grade foundation bolts along with required templates for 7mtr ht. pole

Supply, fitting, fixing and connection of Transrail Make LED Fixture Lotus model Light fixture of 60Watt with complete with all accessories

MAIN DISTRIBUTION BOARD (MDB)

Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Main Dist. Board( MDB) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.

The MDB shall broadly comprise of the following equipment/components)

Incoming Feeders:-

Incomer- 250A, TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No.

Outgoing Feeders:-

100A TPN MCCB - 03 Nos.

63A TPN MCCB - 15 Nos.

40A TPN MCB, - 20 Nos.

300A TPN Copper bus bar in metal encolsure with fixing clamps

Indication lamps(On- Off Trip Power On -- RYB)

Supplying, Installing, Testing & Commisioning cost of Main Distribution Board (MDB) all complete with all necessary items as per direction of E/I.

DISTRIBUTION BOARD (DB)

Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Dist. Boards( DB) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification.

The DB shall broadly comprise of the following equipment/components)

Incoming Feeders:-

Incomer- 63A, TPN , MCB ("C" CURVE), 10 kA 1 No.

40A, 4P , RCCB 100mA/300mA 1 No.

Outgoing Feeders:-

16A SPN MCCB - 12 Nos.

20A SPN MCB, - 06 Nos.

100A TPN Copper bus bar in metal encolsure with fixing clamps

Indication lamps(On- Off Trip Power On -- RYB)

Supplying, Installing, Testing & Commisioning cost of Distribution Board (DB) all complete with all necessary items as per direction of E/I.

SUB-LIGHTING DISTRIBUTION BOARD TYPE-A (SLDB Typ-A)

Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Sub-Lighting Dist. Boards Type-A( SLDB Typ-A) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification.

The SLDB Type-A shall broadly comprise of the following equipment/components)

Incoming Feeders:-

Incomer- 40A, TPN , MCB ("C" CURVE), 10 kA 1 No.

40A, 4P , RCCB 100mA/300mA 1 No.

Outgoing Feeders:-

16A SPN MCCB - 12 Nos.

100A TPN Copper bus bar in metal encolsure with fixing clamps

Indication lamps(On- Off Trip Power On -- RYB)

Supplying, Installing, Testing & Commisioning cost of ub-Lighting Distribution Board (SLDB Type-A) all complete with all necessary items as per direction of E/I.

SUB-LIGHTING DISTRIBUTION BOARD TYPE-A (SLDB Typ-B) FEEDER PILLARS

Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Sub-Lighting Dist. Boards Type-B( SLDB Typ-B) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification.

The SLDB Type-B shall broadly comprise of the following equipment/components)

Incoming Feeders:-

Incomer- 40A, TPN , MCB ("C" CURVE), 10 kA 1 No.

40A, 4P , RCCB 100mA/300mA 1 No.

0-24hrs Timer with 40A 3pole power contactor with 230V AC coil for automatic switching operation

3 Pole AC3 duty power contactor (40Amps)

Outgoing Feeders:-

16A SPN MCCB - 12 Nos.

100A TPN Copper bus bar in metal encolsure with fixing clamps

Indication lamps(On- Off Trip Power On -- RYB)

Supplying, Installing, Testing & Commisioning cost of Sub-Lighting Distribution Board (SLDB Type-B) all complete with all necessary items as per direction of E/I.

Drainge Chanels by mascot

Labour Cess

Bidder Name

Amount

R. M. Construction(GSTN-20AANFR2361J1Z9)

M/s Anand Construction(GSTN-20ADTPA6894J2Z6)

M/s Anand Construction

M/s Anand Construction