Supply, Installation, Testing and Commissioning of 16 Passengers (1088 Kgs) Lifts to Sri Vakulamatha Temple, Tirupati (Part-A portion).

Supply ,Installation Testing & Commissioning of 16 Passengers Lifts with the following specifications.

(I) PRODUCT DETAILS: Building Type: Trust, Product Name: SUKRANTI, Number of Units: 2, Lift Designation:- , Lift Type: Passenger Lift, Rated Capacity Persons / Kgs:16 Persons / 1088 Kgs / P- Passengers, Rated Speed m/s: 1.25, Number of stops / openings: 3 / 2, Floor Designation: GROUND + 2 UPPER FLOORS, Access Sides Inline/Thru Type: 1 (One), In Front Only, Floor Display Character (Entrance Position): 0(F),EL(NSEMOPF),2(F)

(II) MACHINE AND CONTROLLER DETAILS : Machine Location / Type: Machine Room less - Gear less, Drive System: Micro Processor Based VVVF, Control system:Microprocessor Based Simplex Selective Collective Control With / Without Attendant, Main Power Supply: AC 3 Phase, 50 Cycles, 415 Volts ±10%, Light Power Supply: 220 Volts 50Hz LNE

(III) SHAFT DETAILS : Shaft Type: RCCRB - Reinforced Cement Concrete With Red Brick, Shaft Width mm X Shaft Depth mm: 2500 X 2400, Overhead mm: 4800, Pit Depth mm: 1600, Travel Height (in Meters): 21, Shaft Reduction Channel: Not Required, Shaft Reduction Channel Weight (in Kgs): No, Pit Ladder: Yes

IV CABIN DETAILS A) SIZES Car Width mm X Car Depth mm: 1300 X 2000, Car Clear Height mm: 2200, Car Door Type Center/Side: Power Operated Center Opening Sliding Door, No Of Door Panels: 2 Panel, Type of Door Drive: Linear Door Drive System, Car Door (W X H) mm: 1000 X 2000

B) FINISHES - *SUBJECT TO AVAILABILITY Design Of Lift Cabin: Stainless Steel (1.5 Mm), Lift Cabin Finish: Hairline Finish, Car Door: Stainless steel (1.5 mm), Car Door Finish: Hairline Finish, Ceiling Finish: Ss Hairline Finish, Ceiling Type: Sleek Small Circular-, Ceiling Light: Led Lights -03, Fan: Regular (Circular) - Fan, Flooring Type: 20 Mm Recess By -Granite Flooring Client, Handrail Type: Ss Round Handrail , Handrail Location: Rear Side, Car Door Sill : Aluminum

V LANDING DOORS DETAILS A) SIZES Door Type: Centre Opening Sliding Door, Door Size (W x H) mm: 1000 X 2000, Door Sill: Aluminium

B) FINISHES Landing Door Finish: 1-3-Glass - Ss Enveloped (1.5 mm) Hairline Finish, 2-2 - Stainless Steel(1.5 Mm) - Hairline Finish Non Fire rated, Landing Door Frame / Finish: 1-3-Stainless Steel (1.5 Mm) - Hairline Finish, Main Landing Floor: 0, Other Landing Floors: EL,1, Jamb Type: Slim Frame

VI SIGNALIZATION / FIXTURES DETAILS A) CABIN OPERATING PANEL Car Operating Panel Type: Car Operating Panel - , Number of Car Operating Panel: 1, COP Faceplate Finish: Stainless Steel - Hairline Finish, Button Model: (Round), Car Display: Orange Square Dot-Matrix Scrolling Display-Vertical, Car Display Location: Car Operating Panel, Call Register Signal: Yes, Floor Annunciator: Yes

B) LANDINGS INDICATORS Landing Operating Panel Type: Landing Operating Panel - , LOP Location: Landing Display On Wall, LOP Mounting Type: Grouting, LOP Faceplate Material: Stainless Steel - Hairline Finish, Landing Display : 1-3-OSDM-V, 2-2-NODISP, Landing Display Location:1-3-LOP,2-2-NA, Call Register Signal:Yes, Stainless Steel Braille Button: Yes

VII SAFETY DETAILS Over Speed Governor: Yes, Door Protection: Infra-Red Door Screen, Counterweight Screen: Inbuilt, Over Load Indicator: Yes, Fireman Switch: Yes, Automatic Rescue Device: Yes, Battery Operated Emg Alarm Light: Yes, Two Way Intercom with Press & Speak in COP: Yes, VIII: ADDITIONAL FEATURES:D02 1.Scafffolding, 2.Free service for two years, 3.Unloading at site 4.Minor builders works

Makes: OTIS / SCHINDLER / MITSUBHISHI / KONE / JOHNSON

Note:(1) The tenderers are requested to quote basic rates (Excluding GST) (2)GST Amount will be Paid to the Contractor as per actuals and applicable (3) Statutory deductions will be made as per Norms, If applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented