Proposed construction of MLA Hostel at Capital Complex, Agartala, West Tripura_SH Supplying and fitting fixing of furniture and fixtures for residential units, Barrack, Library and conference hall

Amount

DINNING ROOM

Providing, Installing and Positioning of Low height Steel rack for Storage of food as per Construction & Material: Rigid Knock down construction. Prime Quality CRCA Steel – 0.8 mm thick. Sliding Door Arrangement: Full height Sliding Door with top hanging arrangement to prevent derailment. Each door provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise. Locking & handle : Snap on type aesthetically appealing die cast 5 Lever Cam lock for safe locking. Plastic flush & recessed handle. Shelving : Height wise Adjustable Shelf Mounting. Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum & for half shelf it is 40 Kg. 1 No. of Adjustable Full Shelf. Top option: 1 mm for Metal Top. Accessory: Craddle with pipes for hanging files. Leveler: Screw type leveler with hex plastic base (add in unit height minimum 8 mm & additional 5 mm maximum for adjustment). Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Size : 735 mm (H) x 900 mm (W) x 450 mm (D). All the works will be done as per approved design and specification and direction of Engineer-In-Charge (make GODREJ, OTOBI, CLOUDNINE).

KITCHEN

Providing, Installing and Positioning of Rack/Shelf for storage as per Construction & Material: Rigid Knock down construction. Prime Quality CRCA Steel – 0.8 mm thick. Sliding Door Arrangement: Full height Sliding Door with top hanging arrangement to prevent derailment.Each door provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise. Having Glass door for visibility of the content. Locking & handle : Snap on type aesthetically appealing die cast 5 Lever Cam lock for safe locking. Plastic flush & recessed handle. Shelving : Height wise Adjustable Shelf Mounting. Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum & for half shelf it is 40 Kg. 4 Nos. of Adjustable Full Shelf. Top option: 1 mm for Metal Top. Accessory: Craddle with pipes for hanging files. Leveler: Screw type leveler with hex plastic base (add in unit height minimum 8 mm & additional 5 mm maximum for adjustment). Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). size: 1830 mm (H) x 900 mm (W) x 450 mm (D). All the works will be done as per approved design and specification and direction of Engineer-In-Charge (make GODREJ, OTOBI,CLOUDNINE ).

BED ROOM-1 (MASTER BED)

Providing, Installing and Positioning of Double Bed mattress as per approved colour drawing & design/specification of Architect & Engineer-in-charge. Dimension of mattress 1950 x 1800 with a thickness of 100 mm. Prepared foam mattress with foam density not less than 80A (make Godrej, Kurlon, Sleepwell ).

Providing, Installing and Positioning of Steel Almirah as per Product size : 1018 mm (W) x 537 mm (D) x 1980 mm (H). Construction & Material: Welded construction. 0.8 mm thick CRCA for back, full shelf & locker shelf, 0.63 mm thick CRCA half shelf, 0.9 mm thick CRCA for all other components. Locking & handle: Mazak handle.Three way locking mechanism with shooting bolt. Locker: Fixed half locker with secret compartment. Hinged Door for locker. 2 way locking mechanism for locker door. Shelving: Height wise adjustable shelf mounting. 1 no. of adjustable full shelf,1 no. of fixed full shelf,1 no. of adjustable half shelf. Hanging Rod & Tie Bar: 1.0 mm thick ERW tube for hanging rod. 1.0 mm thick aluminum for tie bar. Leveler: M 10 screw type leveler with hex plastic base. Finish:Epoxy powder coated to the thickness of 50 microns. All the works will be done as per approved design and specification and direction of Engineer-In-Charge(make GODREJ, OTOBI, CLOUDNINE).

BED ROOM NO- 2

Providing, Installing and Positioning of Double Bed mattress as per approved colour drawing & design/specification of Architect & Engineer-in-charge. Dimension of mattress 1950 x 1800 with a thickness of 100 mm. Prepared foam mattress with foam density not less than 80A (make Godrej, Kurlon, Sleepwell).

BARRACK(10 BEDDED 2 ROOMS, 5 BEDDED 6 ROOMS, 3 BEDDED 14 ROOMS) AND GUEST ROOMS

Providing, Installing and Positioning of Single Bed mattress as per approved colour drawing & design/specification of Architect & Engineer-in-charge. Dimension of mattress 1950 x 900 with a thickness of 100 mm. Prepared foam mattress with foam density not less than 80A (make Godrej, Kurlon, Sleepwell).

CONFERENCE HALL (2 Nos)

Providing, Installing and Positioning of Conference hall table 40 seater as per Work Surface: Made of 25mm thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Understructure: It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction.Modesty Panel:Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns).Wire Management: an array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio, video cables onto worktop and connect devices charger to power socket below worktop.1 seater size: 675 mm (W) x 600 mm (D) x 750 mm (H), 2 Seater 1350 mm (W) x 600 mm (D) x 750 mm (H), 90° Corner 850 x 850, 3-4 Seater 1800 (W) x 850 (D) x 750 (H) mm. All the works will be done as per approved design and specification and direction of Engineer-In-Charge (make GODREJ, OTOBI, CLOUDNINE).

Providing, Installing and Positioning of conference chair with arm as per the seat / back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. The chair is available in four models. BACK SIZE: 50.0 cm (W) X 49.0 cm (H). SEAT SIZE: 50.0 cm (W) X 46.0 cm (D).The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The seat and back covers are injection moulded in black co-polymer polypropylene.The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.5 cm thick HR steel. The tubular frame is cantilever type & made of Dia. 2.54 cm (1”) x 14 BG M.S. E.R.W. tube and black powder coated. All the works will be done as per approved design and specification and direction of Engineer-In-Charge (make GODREJ, OTOBI, CLOUDNINE).

LIBRARY (COMMOM)

Providing, Installing and Positioning of Steel Storage model 4 Door Book Case as per Size: 1742 mm (H) x 914 mm (W) x 320 mm (D) for 4 Door. Construction & Material: Rigid Knock down construction. Prime Quality CRCA Steel - Panels & Frame from 0.8 mm thick. Configuration (Doors): 4 Door. Door Features / Locking: Each Door has 10 Lever Cam lock with common key. Each Door has 3 mm thick transparent glass for clear inside vision secured in a Metal Frame through rubber gasket. Each door has a Scissor mechanism for receding inside the top of respective compartment & ensures parallel & smooth movement. Each door has Plastic side end caps as Handle which is easy to grip. Behind Storage Shelving: Each compartment has storage shelf. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum.Top Panel: 4 Door has Inside Metal Top Panel. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). All the works will be done as per approved design and specification and direction of Engineer-In-Charge (make GODREJ, OTOBI, CLOUDNINE).

M/S SUNIL KUMAR BANIK

DESIGN M