SPECIAL REPAIRS FOR REPLACEMENT OF BER OT LIFT AT INHS SANJIVANI, INCLUDING 03 YEARS COMPREHENSIVE MAINTENANCE NAVAL BASE KOCHI

Amount

Description :- (a) Car Travel - G+4 floors (b) No of stops - 5 (c) Shaft Size - 1900 mm (Width) x 2750 mm (Depth) - Existing (d) Machine Room - 4000 mm (Width) x 8000 mm (Depth) x 2500 mm (Height) - Existing (e) Pit Depth - 1700 mm (Existing) (f) Overhead - 4800 mm (Existing)

Car Enclosure :- (a) Car Panel - Stainless Steel cabin in Moon rock finish with handrail (b) Car size - 1000mm (Width) x 2400 mm (Depth) x 2200 mm (Height) (c) Car Entrance - 800 mm (Width) x 2000 mm (Height) (d) Car Door - Stainless steel two panel auto door centra opening in moon rock finish with vision panel (e) Flooring - Al. Channel flooring (f) False Ceiling - SS False ceiling (g) Lights & Fan - LED Light & Axial flow fan (h) C.O.P - Illuminated buttons with Dot Matrix direction & Position indicators

Landing :- (a) Landing door - Stainless steel two panel auto door centre opening in moon rock finish with vision panel (b) Clear Opening - 800 mm (Width) x 2000 mm (Height) (c) L.P.B - Illuminated buttons with Dot Matrix direction & Position indicators

Machine :- (a) Macine - Traction type gearless machine located directly above the lift well (Machine Room) (b) Main Power system - 415V, 3 Phase, 50 Hz, AC (c) Auxiliary Supply System - 220/230V, single phase 50 Hz AC (d) Operation - Simplex full collective system (e) Required drive - AC VVVF

Special Features :- (a) Battery operated emergency alarm bell (b) Automatic rescue device (ARD System) (c) Full curtain infrared door safety (d) Illuminated buttons with Dot Matrix direction and position indicators in car & at all landings (e) Over load warning indicator (f) Floor announcement system (g) Intercom

Note :- 1. Rate includes civil works/ modification required for erection of lift like lift pit, RCC baseand cables shall be carried out by the contractor as per OEM specifications/site requirement and as per directions of GE/EIC. Necessary electrical cables from nearest existing LT Panels (new control panel shall be provided by the contractor) and new elevator LT control panels shall be provided by as per OEM recommendations and directions of EIC. 2. Necessary concrete cutting of existing walls/beams to erect /open the elevator door and std earthing of lift etc shall be catered in the scope of work . 3. The load, design and GAD of the elevator and structure,shall be submitted by the contractor duly recommended and vetted by the OEM. 4. Any special items/accessories left out in the contract for successful completion of the work shall be provided by the contractor as per site requirement. The tenderer should visit the site to check the feasibility and alteration civil wks required at site bidding the tender. 5. Necessary water proofing shall be provided in lift pit to avoid ground water ingressive inside the pit. 6. The rate for all above notes (S.No 1 to 5) shall be deemed to be included in the quoted rate.

Materials and labour for earthing complete with galvanised iron earth plate electrode of size 600 mm x 600 mm x 6 mm thick, burried directly and vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with and including galvanised earth strip of size 32 x 6mm (Upto length of 7.5Mtr strip including) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia complete etc including taking down of old earthing complete all as specifed and directed.

Supply and fixing and connecting up Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe as directed/specified for loop earthing etc as required of galvanised iron strip of size 32 x6 mm complete etc including taking down of old conductor complete all as specifed and directed. Note; This item shall be measured for the quantity used at site after the length of strip 7.5 Mtr

Taking down cement plaster on brick or stone wall / Ceiling etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3, on fair faces of Ceiling/ concrete surfaces finished even and smooth without using extra cement complete all as specifed and directed.

M&L for Preparing surfaces new plastered ceiling surfaces and applying two coats of acrylic washable distemper over a coat of primer complete all as specifed and directed.

M&L for complete removal of existing treatment with grinder or modern neccesary tools and washing by mechanical jet spray and applying two coats of acrylic washable distemper over a coat of primer on old wall surfaces complete all as specifed and directed.

M & L for preparation and applying of one coat of synthetic enamel painting on old steel surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specifed and directed.

Dismantling floor, hearth or wall tiling including cement mortor bedding complete all as specified and directed.

S & F Vitrified Ceramic tiles light shade 10mm thick (square/ectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 20mm thick screed bed in CM 1:6 complete all as specifed and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, on entrance of lift wall incl 10mm thick back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment. to match the shade of granite stone complete all as specified.

Taking down shutters with frames of size n.exc 1.5 Sqm each with shutters (without taking off shutters from the frame) and removing from site complete as directed.

Taking down shutters with frames of size exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing from site complete as directed.

S&F powder coated(minimum thickness of powder coating 50 micron) aluminium frames for doors, windows, ventilators with one or more rebate including joining cleat for fixing etc complete all as specified

S&F powder coated( minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges(150mm size-3 nos), anodised aluminium snap beading, screws etc. complete all as specified

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M&L Veneered decorative plywood 9mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame all as specified.

S&F in repairs sheet glass, ordinary quality 4 mm thick and glazing with alu bedding/ oil putty in square n.exc 0.5 sqm in each pane complete all as specified.

S&F in repairs aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified.

S&F in repairs mortise lock Brass of size 75mm 4 levers vertical type,complete all as specified

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern with approvbed standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @200 mm c/c , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium stanndard section around the opening, all complete as per requirement and direction of Engr in charge .

Same as item No. 22 but for Second year after expiry of defects liability period. (ie for one year after completion of first year maintenance period vide item no. 22 above)

Same as item No. 22 but for Third year after expiry of defects liability period. (ie for one year after completion of Second year maintenance period vide item no. 23 above)

Notes for item Nos. 22, 23 & 24:- (a) The comprehensive maintenance shall be done through OEM of the lift (b) The contractor shall enter into an MOU (Memorandum of understanding) with the OEM or their authorised agency for maintenance of the Lift. The above comprehensive AMC certificate shall be provided by the contractor in favour of GE (NS) before commencement of work, after acceptance of CA. (c) The parts shall be genuine and shall be from original Equipment manufacturer (OEM) and shall be as approved by GE. (d) All stainless steel parts such as lift car enclosure, opening doors, jamps, cills, etc shall be thoroughly cleaned to remove rust, stains, etc with suitable solution. The contractor shall also clean and properly maintain machine rooms, machineries and lift well as directed by EIC. The rates quoted for respective items shall be deemed to include for the same. (e) No spare parts and consumables shall be supplied by the department. (f)The rate of maintenance, service and repair including all the material and labour for the satisfactory functioning of the Ifits. (g) Any breakdown/complaints shall be attend and rectify within 6 hrs. If the complaint is not attended and repaired within 24 hrs, penalty of Rs 2000/- per day will be charged. (h) The contractor is responsible to carried out periodical routine check up (Monthly/ Quarterly) through OEM (Once in a month) or as per contract agreement to ensure the serviceability and proper functioning of the lifts in all respect. (i) The contractor is responsible to clean/drain water from lift pit with necessary equipments. The rate for the same is deemed to include in the quoted rate.

MB Enterprises

PREMIER ENGINEERING SYSTEMS