Special repairs and maintenance of PWD rest house Nenmara New block

Amount

special repairs

OD64643/2021-2022:Scrapping the dirt and stains using machine mounted wire brush/any suitable abrasive pads, washing and cleaning of tile/ceramic surface using acid as per the direction of Engineer in charge etc.

OD119097/2022-2023:Removing white or colour wash by scrapping using dry wall sanders using suitable abrasive pads of required grit, preparing the surface smooth including necessary repairs to scratches etc. complete.

OD140206/2022-2023:Cutting chases in existing walls at masonry-concrete interface, placing fibre mesh along the length with necessary overlap on both surfaces and making good the surface with plaster and proper finishing to match with the surrounding areas.

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

OD140513/2022-2023:Polishing the existing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including grinding, buffing, polishing as directed by Engineer-in-charge, (for payment purpose running length of the hand rail will be measured)

OD72188/2021-2022:Engaging coolie

OD72189/2021-2022:Engaging Plumber for minor repairs

10.15.1:Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular /L-Type sections, made of 1.60 mm thick M.S. Sheet,joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 ( 1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

8.12:Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

8.6:Mirror polishing on marble work/ granite work/stone work where ever required to give high gloss finish complete.

OD140203/2022-2023:Providing and fixing HDF moulded panel skin doors of good quality 30mm thick, with solid core particle board filling, as directed by Engineer-in-Charge including all labour complete (fixtures will be paid extra)

OD140514/2022-2023:Providing and fixing premium mortice lock with all necessary accesories and labour complete

OD140515/2022-2023:Providing and fixing premium SS door handle of 10in. including screws and labour complete.

OD140516/2022-2023:Providing and fixing premium brass door handle of matte finish 8 in. including all screws and labour complete.

OD140517/2022-2023:Providing and fixing door catcher including screws and labour complete.

OD140518/2022-2023:Providing and fixing SS tower bolt 6 in. including screws and labour complete.

OD140519/2022-2023:Providing and fixing SS tower bolt 8" including screws and labour complete.

OD140520/2022-2023:Providing and fixing brass finished cloth hanger wall (mount type) including all screws and labour complete.

OD140521/2022-2023:Providing and fixing good quality SS aldrop 12 in. including all screws and labour complete.

OD140522/2022-2023:Providing and fixing premium brass tower bolt of size 6 in, including necessary screws and labour complete.

OD140523/2022-2023:Providing and fixing premium brass tower bolt of size 8 in, including necessary screws and labour complete.

9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

10.5.2:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece

10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.50.1:Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

OD140535/2022-2023:Water proofing using acrylic coating (Two coats ) after applying single coat of penetration primer, both of approved brand as specified by Engineer-in-Charge.

14.66.2:Finish walls with Acryllic Smooth exterior paint of required shade:Old work (One or more coat applied @ 0.90 ltr/10 sqm)

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

OD140213/2022-2023:Providing and fixing good quality curtain, stitched to the required size with necessary extensions to sides and bottom as required, as directed by Engineer-in-charge inclusive of all stitching and fixing charges complete (Measurement of cloth area will be taken for payment)

14.6.1:Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

18.18.3:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

OD140536/2022-2023:Providing and fixing beveled edge mirrors, fixed to tiles using double sided tapes attached to the back 60*60 cm or any nearest size available

OD140526/2022-2023:Providing and fixing PTMT concealed cock of premium quality (water tec or equivalent) with all necessary accessories complete.

OD140527/2022-2023:Providing and fixing PTMT shower head of premium quality (water tec or equivalent) with all necessary accessories complete.

OD140528/2022-2023:Providing and fixing PTMT wash basin pillar cock of premium quality (water tec or equivalent) including all necessary fittings and accessories.

OD140529/2022-2023:Providing and fixing PTMT health faucet of premium quality (water tec or equivalent) with all necessary accessories complete.

OD140530/2022-2023:Providing and fixing PTMT angle valve of premium quality (water tec or equivalent) with all necessary accessories complete.

OD140531/2022-2023:Providing and fixing PTMT connection tube-1m of premium quality ( Water tec or equivalent) with all necessary accessories complete.

OD140532/2022-2023:Providing and fixing PTMT soap dish of premium quality (water tec or equivalent) with all necessary accessories complete.

OD140533/2022-2023:Providing and fixing PTMT long body bib cock of premium quality (water tec or equivalent) with all necessary accessories complete.

OD140534/2022-2023:Providing and fixing PTMT towel rod of premium quality ( watertec or equivalent) with all necessary accessories complete.

13.71:Lettering with black Japan pint of approved brand and manufacture

23.3.2:Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.150 mm nominal size dia

R.CHANDRAN

Bidder Name

C.RAMDAS

R.CHANDRAN