NIT No. 4 Item No. 6 EE (T)/ACE( M)-4

Supply of deep well Submersible pump set 7.5 HP,3 Phase, AC supply, working Voltage 415 V, having discharge 220 LPM at head 85 to 100 Mtr. Make-BS/ KSB/ SU/ Mody/all DJB approved make

Supply of rubber mat for electrical purpose of size 1M X 2M and 3 mm thick. Make: - Jyoti/Dunlop/ DJB approved make

Supply of kit kat board made out of wooden having 3 Nos. 100 Amp (415 volts re-wireable) kit kat of Havells/Standard/ DJB approved make.

Ultra bright LED Tube light (single side connection) with very high efficacy – 18 Watt. Make:- Havells/Bajaj/Crompton

Supply of PVC insulated PVC sheathed, copper flat submersible conductor( flexible) cable, Size 3 core x 6 Sq mm ,1100 Volts, conforming to IS 694 . Make:- Havells/Finolex/DJB approved make

Supply of LT power Aluminum cable, solid, XLPE, insulated PVC sheathed, armoured 650/1100 V-grade as per IS 7908 (Part-I) 1988 size 3.5 x 25 Sq mm.Make:- Havells/Gloster/Grandey/ DJB approved make

Supply of energy saving & environment friendly, pressure die cast Aluminum housing 45 Watt LED street luminaries. Make:- Havells/Bajaj/Crompton/DIB approved make

Supply of 50mm dia. B class GI pipe length 3 Mtr. With duly Welded flange in both sides, complete with cutting of flange for cable and welded support in both flanges. Make: - Jindal/ Parkash/ Surya/Tata/Tata/Jindal Hisar/Jindal Gaziabad.

Supply of G.I. tail piece medium class of 0.5 mtrs long including one end flanged and other end threaded of 50mm dia. Make:- Jindal Hisar/Jindal Gaziabad.

Supply of 50mm dia. GI Bend with both side flanges duly welded. Make Jindal Hisar/Jindal Gaziabad/ DJB approved make.

Pressure Gauge of 150mm dia. size having required range with accessories such as GI fittings, Bib cock etc. required complete the work. Make:-Hguru/fibeg/DJB approved make.

Supply of M.S. Clamp of MS strip duly hole for holding the pipe of 50mm dia. with nut bolts and washer.

Supply of M.S. Bore cover made out of MS plate suitable for 12” dia. bore complete with suitable hole for passing the 50mm dia. GI Pipe

Supply of CI. D.F. non rising spindle sluice valve, PN 1.0 Size 50mm dia. Make:- Kirloskar/ IVC/ DJB approved make

Supply of CI, D.F. swing check NRV.P.N. 1.0 Size 50mm dia. Make:- Kirloskar/ IVC/ DJB approved make

Supply of Nut Bolts,Washer,Spring of sizes

Supply of electronic dosing pump (4 LPH, 10 Bar) electrically operated 230 volts, 50 Hz supply chemical grade tank of 100 Ltrs. with pipe etc. Make: - Milton Roy/ Clomax/ DJB approved make.

Fabrication/ Supply of venturi assembly 50 mm dia. with complete accessories as required at site.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with b1.5 Sq. mm,FRLS PVC insulated copper conductor single core cable etc. as required. (DSR E&M 2018 item no. 1.8.3)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (DSR E&M 2018 item no. 1.41)

Supplying and fixing 2+4 way/6 way, Double door , single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (DSR E&M 2018 item no. 2.3.1)

Supplying and fixing 63 Amp rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR E&M 2018 item no. 2.12.2)

Supplying and fixing single pole, 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. (DSR E&M 2018 item no. 2.10.1)

Supplying and fixing of 32 mm dia x2.00 mtr. long GI pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole/wall including bending the pipe to the required shape,2 Nos.40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. (DSR E&M 2018 item no 12.34)

Supplying and fixing outdoor type shock proof, rust proof and weather proof pole mounted junction box made out of one piece mould SMC base and SMC door suitable for operation on 415 Volts, 3 phases 4 wire AC supply. The box shall have clamp, insulators and nut bolts, kit-kat fuse unit. The box shall be fitted with the help of clamp made out of 25x3 mm GI strip and GI nut, bolts & washer etc. Make:-Sintex/DJB approved make.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR E&M 2018 item no. 5.2)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm(DSR E&M 2018 item no. 5.9)

Workmanship Charges for lowering the submersible pump set one no. in new bore well, Fixing/Erection/Installation of E&M equipments, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e. eccentric taper, rubber gasket, necessary reinforcement and vibration isolation arrangement, etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-in-Charge. The all sundry items which are useful & necessary for operation of Tube well in automation mode shall be deemed to have been included, whether such items are especially in specification or not.

Shakti Trading Co.

Volts And Watts Electronics Pvt. ltd.

DEV ENGINEERS