Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAccepted-AOC V P O BOPARAI KALAN DISTT LUDHIANA 141422 PB | LUDHIANA | LUDHIANA | PUNJAB | 141422 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹18.5 L+₹1.2 L (7.00%)Rejected-Finance KHATA NO 254 529 KHASRA NO 364 2 MIN PREET NAGAR A GALI NO 2 HARERI ROAD OPP STAR STUDIO HERARI SANGRUR | SANGRUR | SANGRUR | PUNJAB | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹19.8 L+₹2.5 L (14.4%)Rejected-Finance RAJKOT ROAD AIR FORCE STATION HALWARA 141106 PUNJAB | HALWARA | LUDHIANA | PUNJAB | 141106 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹21.5 L
EMD Value
₹43,000
Closing Date
4 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Halwara
GE (AF) Halwara
DAY TO DAY UPKEEP AND CERTAIN REPAIR TO RIGID/FLEXIBLE PAVEMENT OF AIRFIELD IN TECH AREA AT AF STN HALWARA
2023_MES_573940_2
GE/HAL-64/2022-23
Open Tender
Civil Works
Item Rate
365 days
GE (AF) Halwara
MES ENLISTED CONTRACTORS CLASS E CATEGORY a(i)
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Halwara
₹43,000
Yes
16 Mar 2023
10 Feb 2023
6 Mar 2023
10 Feb 2023
4 Mar 2023
18 Feb 2023
Amount
Painting lines, dashes, arrows, letters, etc. on rigid/ flexible pavements and the like exceeding 10cm wide with one coat of water based road marking paint (IS-164-1981), (white , orange, black or golden yellow) including preparation of surface complete all as specified and directed.
All as per Srl item No 1.00 but not exceeding 10 cm wide Make for Sl Item No 1 & 2 : Asian Apcotrak manufactured by Asian Paints, Glow Mark manufactured by M/s Jayanti Construction Chemicals or equivalent make as approved by GE
M&L for one coat of white wash on old rigid/flexible pavement surfaces including preparation of surfaces complete all as specified. Note :- Applicable to item No 1.00 to 3.00 - Condition 46 of IAFW 2249 shall not be applicable since the scope of work is repeated nature due to Operational requirment basis and will be measured & paid accordingly.
Repair to concrete slab surface(depressed portion/cracked portion) by cutting damaged /spilled portion to required depth removing useless worthless all loose and foreigh materials etc to a distance exceeding 500m but not exceeding 1000m. Cleaning the surface thoroughly with brushes and finally with compressed air, filling and levelling the surface with EPOXY mortar after priming including formwork where required all as specified and as directed.
Repair to flexible surface(depressed portion/cracked portion) by cutting damaged /spilled portion to required depth removing useless worthless all loose and foreigh materials etc to a distance exceeding 100m but not exceeding 500m. Cleaning the surface thoroughly with brushes and finally with compressed air, filling and levelling the surface with EPOXY TAR COMPOUND mortar after priming including formwork where required all as specified and as directed.
Raking out existing filling from expansion, construction and dummy joints of width not exceeding 10mm, upto required depth as specified by special tools like concrete cutter, wire/coir brushes/machines and joint cleaned thoroughly with application of compressed air, making free from all the loose material i.e dirt, dust, grease, existing sealing compound, filler board (as required), including sticked material of existing compound racked upto full depth of joints etc and filling with polyurethane joint sealant single component using mechanical means to a depth 06 mm (depth above the backup rod ) with minimum performance guarantee of 05 years and minimum movement accommodation factor (MAF)+/- 30% confirming to the requirement of BS : 5212 and EN-141875-2003 for hydrolysis/water resistance test including two coats of primer and filling the balance racked depth of joint with backup material i.e closed cell polyethylene to ensure tight packing, so that no gaps or void exist at the top of backup material separated by bond breaker tape over suitable size HD 10 filler board in position where required and as per manufacturer’s instructions complete all as specified and and directed.
All as per srl item No 6.00 above but joint of width exc 10 mm and n. exc 16mm and depth of polyurethane joint sealant 8 mm.
All as per srl item No 6.00 above but joint of width exc 16mm and n. exc 26mm and depth of polyurethane joint sealant 8 mm.
All as per srl item No 6.00 above but joint of width exc 26mm and n. exc 36mm and depth of polyurethane joint sealant 08mm. Note : for Srl item No 6.00 to 9.00 :- The joints have become wider due to regular repair/fillers. Thus joints can not be segregated as Dummy, Expansion and Construction joints. Tenderer are advised to visit site with prior appointment before quoting his rates.
Repair to damaged broken cement concrete slabs of runway by cutting damaged /spilled portion upto 10mm in depth removing useless worthless all loose and foreigh materials etc to a distance exceeding 100m but not exceeding 500m. Cleaning the surface thoroughly with brushes and finally with compressed air, filling and levelling the surface with ELASTOMERIC COMPOIUND after priming including formwork where required complete all as per manufacturers instruction and as directed by Engr-in-Charge.
S&F 4 mm thick industrial plastic fragile sheet fixed to industrial plastic frame in triangular/ rectangular shape with the help of industrial plastic nut and bolts as in replacement complete all as specified
S&F PVC frame of cross sectional area not less than 18 sq.cm or 60mm X 30mm made out of 5 mm thick PVC foam with homogeneous fine cellular structure having smooth outer integeral skin fixed with industrial plastic nut and bolts as in replacement complete all as specified
M&L for dismantling of existing DTGM board and fixing new DTGM sign board using air strip reflective trangular shape (hoow) of each side 122x180cm having required circular perforation to ease with wind thrust pressure, bottom square holes on each side for release of accumulated rain water inside the hollow trainagular structure. Marker body from ultra-violet resistant engineer grade FGRP material bound with epoxy chemicls having ribs anti-termite coated wooden in cubes at the top, centre and bottom horizontally 50x20mm size., monolithic structure to withstand high wind pressure, temperature variations from extreme cold to hotest weather condition and not effected by the rain, inside coated with fire retardant antimony trioxide in chemicl base structure supported over three legs of 80mm NB HDPE pipe supported upto the legs, marking on two sides of the sign board with reflective sheet as per Greenlite cat part No -40-03DTGM FG 122x180 complete alll as specified and directed.
S&F Prismatic Reflective tape (any colour) fixed on airfield sign boards complete all as specified. Make : Greenlite/3M or equivalent as approved by GE.
Writing letters, arrows, dashes, lines or figures ( Block, Roman, Italicor Indian) with retro reflectrive tape( of any colour) upto 40 cm high and 4 cm wide in sign boards complete all as specified. Make : Greenlite/3M or equivalent as approved by GE.
M&L for cutting PQC slabs (300mm thick) to desired depth & profile, removal of all rubbish outside MOD land complete all as specified and directed. Note : The quantity will be measured as Length x depth of cutting.
Demolition of cement concrete as in ground floors and pavings not exc 15cm in thickness (below or above ground level) in patches & removal of rubbish outside MOD land complete all as specified and directed.
Rolling and consolidating formation surface by hand roller 0.2 to 0.5 tonne roller and well rammed with power rammers to achieve 98% procter density complete all as specified and directed.
M&L for Design Mix 200mm thick DLC, ha ving 7 days strength as 10 Kg/Sqcm (using 40mm graded stone aggregates) with minimum cement content 180 Kg/Cum including spreading, rolling and consolidating to required gradient and camber complete all as specified and directed.
M&L for 10mm thick layer of coarse sand, spread, levelled, watered and well rammed complete all as specified and directed.
M&L for 400 micron polythene fild laid over sand including necessary cutting, overlapping not less than 75mm side lap & 150mm end lap complete all as specified and directed. Notes : 1. Cost of Laps is deemed to be included in the quoted rates. 2. Net area shall be measured.
M&L for Design Mix Pavement Quality Concrete (PQC) of flexural strength 45 kg/sqcm using minimum 400 Kg of cement/Cum including mixing of triangular polyster fiber @ 0.25% by weight of cement in PQC complete all as specified and directed. Notes :- (i) Construction joints, dummy joints (contraction joints) and expansion joints shall be measured and paid seperately under respective items of this BOQ. (ii) Deductions shall be made for expansion joints while computing the quantity of concrete. (iii) Price adjustment @ 5.40 Kg of cement shall be made for less/more quantity of cement as per approved Design Mix. (iv) Polyester non-circular fibre as secondary reinforcement mixed in concrete shall be paid seperately as "Supply only" under respective items of this BOQ.
Supply only non-circular polyster fibre as secondary reinforcement of concrete complete alll as specified and directed.
Brooming to surfaces for making impresssions of expanded metal while concrete is green complete all as specified and directed.
M&L forming 25mm thick Expansion joints to a full depth of concrete and joints filled with popyurethane joint sealant single component using mechanical means todepth of 12mm with min performance guarantee of 5 years and min movement accommodation factor (MAF) +30% conforming to the requirements of BS-5212, BS-4254 and EN-141875-2003 for Hydrolysis/water resistance test including 2 coats of primer and fixing approved quality of back up 30mm dia polyethylene rod over 25mm wide expansion pad in position as required and all as per manufacturers instructions complete all as specified and directed by Engr-In-Charge.
M&L forming 10mm thick dummy/contraction joints by cutting upto 2/3 depth of total thickness and joints filled with popyurethane joint sealant single component using mechanical means to a min depth of 10mm with min performance guarantee of 5 years and min movement accommodation factor (MAF) +30% conforming to the requirements of BS-5212, BS-4254 and EN-141875-2003 for Hydrolysis/water resistance test including 2 coats of primer and fixing approved quality of back up 12mm dia polyethylene rod in position as required complete all as per manufacturers instructions using marking taps to avoid slippage on sides complete all as specified and directed by Engr-In-Charge.
Dismantling stone slabs and tiles of any description or thickness, laid dry or laid dry and pointed in any mortar complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregates as in sub base, filling and mass concrete complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in floors finished even and smooth without using extra cement complete all as specified and directed.
M&L for 25mm thick layer of coarse sand, spread, levelled, watered and well rammed complete all as specified and directed.
M&L for 80mm thick M-40 grade, machine pressed precast concrete interlocking paver block with grey cement and pigments (any colour), any shape and size confirming to IS 15568-2006 and joints filled with sand complete all as specified and directed.
JINDAL AND COMPANY
M/S SANGA SINGH AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .