Providing Lining work of 8/R distry of Main Canal of DRP.

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

1 Jungle clearance of specified category 1.380 Ha. 20708.00

and bushes for canal/dam work as

directed with disposing materials etc.

complete.(Excluding tree of girth above

0.5 Mt.)(b) For Medium dence

2 Clearing silt from canal /drain bed by 844.950 Cum. 177.50

digging the same to the required bed

level and gradiant incl. depositing the

excavated earth regularly in spoil bank

for utilising the same for preparing the

bund after breaking clods as and where

directed for lead up to 200 m & lift up to

3 m as under (excluding weed cutting).

(a) For canal 20 to 250 Cusecs..

3 Excavation in all sorts of soil (including 49.500 Cum. 79.00

wet and slushy condition of soil) with

yellow, sandy, gravelly soil including soft

murrum & H.M. including sorting &

stacking and depositing the excavated

stuff in uniform layers as and where

directed upto lead of 30 m and lift as

shown below including clearing the site

etc. compute (including dewatering)

(A) for all canal capacity

(a) 0 to 3 Mt. depth

4 Providing and laying 7.5 cms thick cast 12155.00 Sq.Mt. 344.10

in situ cement concrete 1:2:4 grade with

the use of crushed aggregates for canal

lining works including use of all

equipments, scaffolding, centering form

work etc, with finishing as required to the

exposed surface as directed and

watering and curing ( without sleepers )

with all lead and lifts etc. comp.

5 Providing and laying foundation concrete 27.000 Cum. 3424.30

of proportion as under by using cement,

sand and machine crushed course

aggregate laid in situ including

necessary temping, smooth finishing,

watering and curing as directed with all

leads and lifts etc complete. (a) PCC

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

6 Providing and laying CC 1:2:4 grade 59.400 Cum. 5053.10

using cement, sand and crushed metal

including providing and erecting

necessary form work, centering,

vibrating, smooth finishing, watering and

curing as directed with all leads and lifts

etc complete. (a) Super strucutres

ramming consolidation including

watering with lead as under and all lifts

etc. complete.(a) 0 to 30 m

8 Providing & fixing M.S. Screw gates with 0.200 Smt 45665.00

Capston nut & thrust bearing as per

detailed designed with steel R.S.J at top

incl. Necessary locking arrangements,

guide channel at bottom & fastening&

3coats Oil painting for main outlet.

9 Providing and fixing of Fiberglass plastic 1.000 No. 44280.00

(FRP) Measuring cut throat flume for

accurate measurement of water flowing

through channels with moulded

engraved gauze marking in cusec and

also in centimeter including discharge

table capacity marking flow direction,

pipe stiffener, hold fasts and sand

treatment on back side of flume etc

(Rate is inclusive of transportation of

flume device at site )

For 6.0 cusecs (sec 40cmx180cm)

10 Providing and fixing gauge plate of 1.000 No. 9592.00

following size of material fiberglass

reinforced plastic with engraved bands

width and figures with necessary clits

and fasteners and fixing the same at the

site of work etc complete as directed

For 0.20 mt. x 1.00 mt. gauge patti

11 Providing and fixing M.S. grills of 100.000 Kg 106.23

required pattern to wooden frames of

windows etc.with M.S. flats at required

spacings and frame alround, square or

round bars with round headed bolts and

nuts or by screws

(A) Plain Grill.

Total Amount Rs.

Total Amount Rs.

Executive Engineer

Deesa Irrigation Division