C/O Veterinary Polytechnic building at Kotla Behar in Tehsil Jaswan Kotla Distt. Kangra (HP) (SH- Providing EI therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C. Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus).

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C. Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus).

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI/SCI/Havells/Plaza

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI/SCI/Havells/Plaza

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI/SCI/Havells/Plaza

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

Makes:- KEI/SCI/Havells/Plaza

2x2.5 Sq. mm.

2x6 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI/SCI/Havells/Plaza

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

Makes:- KEI/SCI/Havells/Plaza

3x1.5 Sq. mm.

3x2.5 Sq. mm.

3x4.0 Sq. mm.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

5 pin, 5/ 6 Amps Modular socket outlet.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus)

Telephone socket outlet, Modular.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 15/ 16 Amps one way Modular switch.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus).

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

6 pin,15/16 Amps Modular socket outlet.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus)

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required.

Makes:- KEI/SCI/Havells/Plaza

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus).

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus).

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus)

2 modules (78mmx78mmx50mm)

4 modules(140mmx78mmx50mm)

12 modules (205mmx135mmx60mm)

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Makes:- Philips/Anhor/Bajaj

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 160 TPN Aluminium Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Approximate Size of Panel H- 1250X W-1400 X D-350MM. Assembly Charges of Aluminium/Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA/Power system & control or approved equivalent make).

L.H.S. Panel (1250mm (high) x 1400mm (wide) x 350mm (deep)(Approxi)

MATERIAL:

OUTGOING :

MCCB 63 A 4P 25 kA-03 Nos with O/L & S/C protection,Spreater Terminal MCCB 63 A 4P-6Nos.RHOM Ext.4Nos.

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 63A TPN Aluminium Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Approximate Size of Panel H- 650X W-450X D-200mm Assembly Charges of Aluminium/Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVA/Power system & control or approved equivalent make).

L.H.S. Panel (650mm (high) x 450mm (wide) x 200mm (deep)(Approxi)

MATERIAL:

OUTGOING :

Space for MCB 63 A DP Isolator & RCCB MCB 6 To 32 A SP 36 nos MCB Short Bus Bar 36 Nos.

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider.

63 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider.

63 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Makes:- L&T/Legrand/Schneider.

Double door-6 way

Double door-12 way

Double door-16 way

Providing and fixing indoor decorative aluminium extruded LED Batten including tube rod 20 watt and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Batten for T8 Tube Light with tube rod

Makes:- Bajaj (Cat. No. BLRB DB 118 ),Tube rod(Cat. No.BLRB 20W CWi) ,Havells, Wipro or any approved make

Supplying and fixing Recess mounting 2'x2' size LED solution suitable for surface application with the use of the latest technology 36 Watt (3600 lumen) 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.

LED 36Watt, 2'x2'(In Recess).

Makes: Panasonic(PBLM01368-36W)/Bajaj/Jaquar

Supplying and fixing Bulk Head LED 10 Watt (1000 lumens), 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.

LED 10 Watt Bulk Head on surface/recess mounted.

Makes:Panasonic (PBHM01107-10W)(Bulk Head)/Philips/Wipro/Havell

Providing and fixing following type of Flood Light 50Watts (5000 Lumens),5700K mounting luminaire with powder coated CRCA sheet steel housing, diffusser to avoid glaire, pre-wired with, starter, trigger circuit, surge protection circuit lumen output of 100 lumens per watt complete with all accesseries, connections, testing and commissioning etc. as required.

Makes: Panasonic(PFLM11508)(Flood Light)/Wipro/Havell

Supplying and fixing surface round type LED 20 Watt (2000 lumen), 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc as required.

LED 20 Watt round on surface mounted.

Make :-Panasonic-PDLM10206P 20 W(Round) /Philips/Wipro/Havell or equivalent.

Providing Installation testing and commissionning of ceiling fan with socket size modular steo type electronicfanregulator including wiring the down rods of standardlengh (Up to20 cm) with 16/0.20 mmtwin twisted flexible,cotton braided copper cable,includingproviding and fixing phenolic laminated sheet cover on the fan box and earting etc as required.

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Makes:-Usha Technix/Striker Plus 3 Star Rating, Bajaj,Crompton, or any other approvred make.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep Makes:-Usha/Crompton/Bajaj.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Makes:- KEI/SCI/Havells/Plaza

Armoured cable 95 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Makes:- KEI/SCI/Havells/Plaza

Armoured cable 95 sq. mm (3.5 core)

Supplying and fixing of G.I.pipe class "A" 80 mm dia. as required complete in all respects

Supplying and fixing of G.I.pipe medium class 32 mm dia. as required complete in all respects

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

Makes: Diplast, BEC, Finolex.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

50 mm. dia

Makes: Diplast, BEC, Finolex.

Providing and fixing extra conduit down rod of 20mm dia. x60 cm with 16/0.20 mm twin twisted flexible, cotton braided, copper cable including painting, connections etc. as required. ( Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored).

Supplying and drawing LAN cable CAT 6E, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

UTP Cat 6 Computer LAN Cable with star Seprator Makes:- Havell/KEI/RR.

Providing and fixing surface mounted power coated white CRCA full glow LED panel 1'X4' suitable for surface application and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Surface mounted power coated white CRCA full glow Panel 36 Watt-1'X4'

Makes:-Bajaj (Cat. No. BZSSLL 36W LED WH i),Philips,Panasonic,Wipro or any other approved make.

Providing and fixing surface mounted LED panel 1'X1' suitable for surface application and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required

Surface mounted power coated white CRCA full glow Panel 18 Watts-1'X1'

Makes: Bajaj (Cat. No. BZSSQL 18W WH ),Philips,Panasonic,Wipro or any other approved make.

JAMWAL ELECTRICAL WORKS

Deepak Sood