KMC/WS/TKG/11/2025-26

SUPPLY, DELIVERY & FIXING OF 11 KV/110 V 3 PHASE 3 LIMB RESIN CAST DRAW OUT TYPE PT

SUPPLY,DELIVERY & FIXING OF 11 KV/6KV, 50/5A, SINGLE CORE SINGLE RATION, 15 VA,C1-1 C.T.

SUPPLY,DELIVERY & FIXING OF POWER PACK 600 WATT/800 WATTS 11O V DC 3 PHASE FOR PROTECTION SYSTEM,INDICATION SYSTEM,SPRING CHARGING MOTOR,CLOSING, TRIPPING AND INTERLOCKING SYSTEM PROTECTION RELAY, PUSH BUTTONS, FUSES AND TRANSFORMERS.

COMPLETE PANEL WIRING BY SUPPLY AND INSTALLATION OF 1.1 KV GRADE UNSHEATHED COPPER PVC INSULATION WIRE 7/0.029 OR 2.5 SQMM LAYING INSIDE CONTROL CIRCUIT PANEL TROUGH PVC FRONT COVER CABLE TRAY WITH ALL NECESSARY INCLUDING NUMBERING FERULES,SOCKEYING,CRIMPING JOINTS FOR MEASURING INSTRUMENTS RELAY, POWER PACK FROM CT AND PT INCLUDING SULLY & FIXING OF 2 NOS PUSH BUTTON, 16 NOS 6-10 AMP HRC FUSE CARTRIDGE,BINDING TAPE,NUMBERING FERULES,FLEXIBLE PVC PIPE ETC. THE CT'S SECONDARY CONNECTION SHOULD BE SHORT CIRCUITED & PROPER GROUND EARTH, RECONNECTION OF HT CABLE TERMINAL JOINT.

HIGH VOLTAGE TEST BY 9 KV DC(RECTIFIED AC) BY PARTY FOR THE FITNES OF SWITCH GEARS FOR FURTHER OPERATION

NECESSARY CHECKING TESTING OF PT CERCUIT INCLUDING TRIPPING TEST THROUGH ALL RELAYS. PRIMARY INJECTION THROUGH CT AND MEASURED SECONDARY CURRENT OF RELAYS HAS MADE AT SITE IN PRESENCE OF ELECTRICAL ENGINEER.

SUPPLY AND DELIVERY OF TRIP-NEUTRAL-CLOSE BREAKER CONTROL SWITCH LOCKABLE 66O V, AC 20A FOR HT SWITCHGEAR.

NECESSARY CHECKING TESTING OF PT CIRCUIT INCLUDING TRIPPING TEST THROUGH ALL RELAYS, PRIMARY INJECTION THROUGH CT & MEASURED SECONDARY CURRENT OF RELAYS HAS MADE AT SITE IN PRESENCE OF ELECTRICAL ENGINEER

Supplying of the following HIGH TENSION XLPE Cables (make:Polycab/Gloster/Havells): 3Core x 300 sq mm 11 KV(UE) XLPE

Laying through Underground Trech c ) Laying of two cables above 185 sqmm in an underground trench in single tier FORmation (Horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (f)our) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed

Compression Glands.Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below: FOR 3... core.upto 400 sqmm

Finishing cable ends.(b)Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.3... core 300 sqmm cable

Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor (Make: L & T/ABB/Schneider/Simence/ GE) having contact block of the following range.225-300Amp, 2NO+2NC

Supply and fixing of analog voltmeter ranging from 0-500 V of 144 mm sq size (make :AE/KAPPA/IMP).

Supply & fixing of 230/240V, LED indicating lamp (make :AE/KAPPA/IMP) other than Blue/ white color.

Supply & fixing of control switch of 25A, D.P., 415 V of ON/OFF of type (make :Siemens/ABB/L&T/Schneider).

SUPPLY AND DELIVERY OF MASTER TRIP RELAY TYPE VAJH13, 110 V DC

SUPPLY PF MNX 80 CONTACTOR

Sub Total