PROVISION OF SYNTHETIC BASKET BALL COURT WITH FENCING GATE OTHER MISC WORK AT ICGS VADINAR UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A' B/R ITEMS

Material & Labour for Providing, supplying and installation of 8 Layer acrylic synthetic flooring for basket ball court (3 to 4mm thick) over Plain cement concrete with following stages given below:- (i) JOINT : Special fibre treatment for concrete surface expension/ construction /dummy joints. (ii) PATCH:- 100% Acrylic based emulsion to repair cracks of concrete and asphalt pavement It should be carried out after 30 days from the date of placement of concrete. (iii) PRIMER – 100% Acrylic Unic Floor based emulsion to improve bond of acrylic court system to the concrete or asphalt surface. (iv) RESURFACER:- 02 layer of Acrylic Resurfacer 367 - 30 for filling and smoothing asphalt or concrete surfaces in preparation for Acrylic ITF Approved tennis court system. And fills the surface chips, voids and conceals repairs while providing a smooth surface for colour coating. (v) RUBBER CUSHION COAT:- 02 layer of Acrylic Floor rubber cushion for asphalt or concrete surfaces in preparation for Acrylic ITF approved system. (vi) ULTRA RUBBER CUSHION COAT:- 02 Layers of Acrylic Floor rubber cushion for asphalt or concrete surfaces in preparation for Acrylic ITF approved system. (vii) PRECOAT:- 2 layers of Acrylic based textured tennis top coat. Ideal for colour coating tennis and basketball courts and other sport pavement surfaces. (viii) LINES :- 2 layers of acrylic latex white striping paint textured based ITF approved complete all as specified and directed by Engineer-in-Charge. Note:- The work shall be executed through specialised agency / applicator of synthetic flooring and material shall be approved ITF standards of Make carbolink india Pvt Ltd or equivalent and colour of synthetic flooring shall be approved by GE / Engr-In-Charge. The unit rate quoted by the contractor/bidder shall be deemed to be included guarantee peiod of three years from the date of completion. The security deposit amount shall be calculated as per the scale laid down by MES for calculated individual security deposit on the toal amount of said item.

Supply and fixing basket ball board including basket ball pole with connected items complete set consisting of mainly the following components :- (a) 20 mm thick fibre acrylic sheet / 'A' grade malesian board white including 50 x 50 x 2 mm thick with MS black square pipe frame with board of size 71" x 41" including standard marking on board. (b) 450 mm dia basket dunking iron ring with net made out of 18mm dia MS pipe fixed to board as per standard practice. (c) Top holding plate made out of 6 mm thick MS plate including 4 Nos 100 mm long 16 mm dia bolt and nuts. (d) Base plate made out of 6 mm thick MS plate including 4 Nos 16 mm dia, 650 mm long bolts and nuts. (e) Basket ball pole 150 mm dia and 2.5 mm thick round mild steel black pipe of standard height approx 3.20 Mtr verticle above floor level and 1.0 mtr deep below floor level fixed in PCC 1:2:4 and approx 2.2 Mtr projection /extensions to fix the board with adjoint pipe of square 50 x 50 and 2 mm thick as per standard practice as specified & directed by Engr-In-Charge. (f) All MS items duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge

Material & Labour for Preparing Existing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 100mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in flooring, complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exceeding 1.5 Metre wide and not exceeding 1.5 Metre depth for foundation, etc., and getting out in soft/disintegrated rocks, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils, complete all as specified and directed by Engineer-in-Charge.

Removing Excavated soils not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Plain Cement Concrete Type D-2, 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Pre-cast cement concrete block masonary type C-1, 1:3:6 (20mm graded stone aggregate) with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 15mm thick on fair faces of stone masonry surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling & mass concrete, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end & screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nuts exceeding 5cm but not exceeding 10cm long, 11 to 15mm dia of shank, complete all as specified and directed by Engineer-in-Charge.

Material and labour for painting of steel surfaces applying two coat of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces, over 10cm in width or girth, not otherwise described, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MS galvanised chain link fencing with PVC coating weight not less tha 2.50 kg per square meter and dia of wire not less than 2.4 mm with 1.5mm thick PVC coating and aperture of mesh 50mm x 50mm size, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing steel work in tubular trusses, grill, grating and gates etc., including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240, complete all as specified and directed by Engineer-in-Charge. Note:- The cost of making the semi-circular structure is deemed to be included in the rate quote.

Surface excavation exceeding 30cm and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed by Engineer-in-Charge.

Material & Labour hardcore of guage not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for coloured chequered cement concrete designer tiles 30cm x 30cm x 22-25mm thick set jointed and pointed in neat cement in equal partition and pigments including 20mm thick screed in Cement Mortar 1:6 with grey cement and pigments, complete all as specified and directed by Engineer-in-Charge.

SCHEDULE 'A' E/M ITEMS

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 Sqmm 4 core, complete all as specified and directed by Engineer-in-Charge. Make: Polycab/Havells/RR Kabel/Plaza

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 Sqmm 2 core,complete all as specified and directed by Engineer-in-Charge. Make: Polycab/Havells/RR Kabel/Plaza

Supply and Laying, 50mm OD Double Wall Corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall for protection of underground Cable with all fittings, complete all as specified and directed by Engineer-in-Charge. Make: Gemini/Rex/Poly

Supply & fixing LED flood light fitting 150 Watt with LED lamps and driver and made of pressure die-cast aluminium housing IP66 road way luminaries (wider beam angle not less than 120 degree, optics with convex lens/pinet lens) with UV stablized polycarbonate cover or heat resistant toughen glass cover and high power LEDs as light source with LED fittings system Lumen not less than 100 lumen per watt and electronic driver with efficiency 85% with inbuilt protection against lighting, over voltage, short circuit and surge/spike protection upto 10 KV ensuring longer life (THD<10%, PF shall be > 0.95, colour temperature 5700±300K), life expectancy of LEDs minimum 50,000 burning hrs, warranty of complete luminaries fitting shall not less than three years. The fitting shall be tested in NABL accredited LAB and LM 79 & LM 80 test certificate shall be submitted by the original manufacturer, including connection, complete all as specified and directed by Engineer-in-Charge. Make: Wipro/Philips/Crompton Greave

Supply and fixing Octagonal hot dip galvanised iron pole, 7m long with base plate, 300 mm long weather proof reinforced door opening with MCB and RYBN terminal arrangement, 'J' shape, EN8 foundation bolt with nuts template including RCC foundation as per manuacturer's design conforming to IS 1786 and hot dip galvanised single arm bracket for fixing of street light with one MCB 6 Amp with 40 Amp RYBN terminal block all as specified and directed. The foundation shall extend above surrounding levels by 200mm, complete all as specified and directed by Engineer-in-Charge. Make :Surya/ Bajaj /Utkarsh NOTE :(i) The contractor should submit manufacturer's foundation drawing before commencement of foundation work. Excavation/earthwork, removal and returning filling included in the quoted rate. (ii) Applying one coat of Aluminium paint including numbering of pole in the quoted rate.

Supply & Fixing in two run of PVC insulated 2.5 Sqmm copper single core conductor cable between cable loops box to fitting drawn through the pole, complete all as specified and directed by Engineer-in-Charge. Make: Finolex/Polycab/RR Kabel

Supply and fixing sheet metal enclosure for Single pole and neutral DBs when MCBs to be used 8 way 230 V double door with 200 Amps bus bar, complete all as specified and directed by Engineer-in-Charge. Make:Legrand/Schneider/Hager

Supply & fixing MCB Single pole 230 Volts 20 Amps, 10 KA 'C' curve, complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Schneider/Hager

Supply & fixing MCB Single pole & neutral 230 Volts 32 Amps, 10 KA 'C' curve, complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Schneider/Hager

Supply & fixing MCB triple pole & neutral 415 Volts Amps, 10 KA 'C' curve, complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Schneider/Hager

M/s SK Traders

Nitesh Enterprise

K K Construction Co

JAMNAGAR ELECTRIC AND MACHINERY CO

DWARKADHISH ENTERPRISE

Vijay Construction Co

roxy enterprise