SPECIAL REPAIRS REPLACEMENT TO CONVERSION OF OH LINES INTO UG LT CABLE AND PROVN OF CERTAIN MW AT VARIOUS LOCATIONS AT MIL STN DHRANGADHRA

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in hard and dense soil and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed. Note: Depth after punning shall be measured and paid separately.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundtion of pole/stay assembly etc including necessary form work, all as specified and directed.

Supply and laying sub class old 'B' burnt bricks, laid as cable protection cover complete all as specified and directed.

S&F, LT junction box for street light, FRP type with hinged type door and locking arrangement, off white colour of size 230 x 200 x 105mm (internal) comprising of suitable size Aluminium bus bar 3 rows with base insulation and 01 No. earthing terminal bolt, nut and connecting up cables with terminal lugs complete all as specified and directed.

S&F, FRP insulated and PVC sheathed copper conductor cable of size 1.5 Sqmm, 3 core, 1100 volts grade, multistranded, passing through PVC pipe, fixed on pole/wall from junction box to street light fitting complete all as specified and directed.

S&F, FRP insulated and PVC sheathed copper conductor cable of size 1.5 Sqmm, 3 core, 1100 volts grade, multistranded, passing through existing pipe, fixed on pole/wall from junction box to street light fitting complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, 6 Sqmm, 2 Core, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade of size 240 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, 10 Sqmm, 2 Core, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade of size 240 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, 10 Sqmm, 4 Core, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade of size 240 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, 16 Sqmm, 4 Core, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade of size 240 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, 25 Sqmm, 3.5 Core, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade of size 240 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, 50 Sqmm, 3.5 Core, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade of size 240 Sqmm 3.5 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Dismantling cross-arms of M.S channel or angle sections etc. complete all as specified and directed.

Dismantling insulators any type, any size complete all as specified and directed.

Dismantling stay assembly complete (demolition of concrete, etc. and excavation measured separately) complete all as specified and directed.

Dismantling of ACSR or AAC conductors complete all as specified and directed.

Supply, installation, commissoning and testing, in repair, feeder pillar board, Kiosk type, LT (415 Volts, 50 Hz , 3-phase, 4 wire supply) plinth mounted, factory made, outdoor type, weather and vermin proof (Protection Class IP-54) made out of angle iron frame and 3.00 mm thick MS Sheet CRCA sheet powder coated with front & back hinged opening, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enemell gray paint (First Quality) over a coat of red oxide primer, grouting panel through angle iron 0.45 mtr in ground and 0.3 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete comprising of the followings:- (a) Incoming supply:- (i) Aluminium bus bar chamber 100 amps rating of 04 strip having suitable whole with nuts and bolts- 01 No (ii) MCCB, thermal and meganitic setting, 4 pole AC 415 Volts, 63 Amp rating - 01 No (iii) MCB, 40 Amp, 04 Pole, 415 Volts-04 Nos. (IV) MCB 40 Ampo, 02 Pole, 230 Volts - 02 Nos (v) Digital type multifunctional meter showing A, V , Hz etc with suitable CT ratio - 01 No (vi) Indicatiing lamp Neon type for R-Y-B - 3 Nos

M&L, in repairs, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth strip of 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by renderers shall be deemed to include for following provisions;-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 40 mm bore light grade 7.5m

S&F, in repair, GI pipe, 40mm bore, light grade, laid below road/fixed along the poles / walls with necessary clamping, etc complete all as per specified and directed.

S&F, in repair, GI pipe, 50mm bore, light grade, laid below road/fixed along the poles / walls with necessary clamping, etc complete all as per specified and directed.

Supply of steel body evaporative Duct Type desert cooler with fan motor (ISI marked to IS 996 latest), fan blade of 430mm sweep of aluminum material, 1400 RMP for 2000 cum/hr nominal air capacity,3 Speed Control, wood wool filter pads of thickness size is 15mm or above with non-corrosive wire guard for filter pads, float valve at the inlet, submersible pump , the material of filter panel, grill, top of the cooler body is made of galvanized steel sheet of thickness not less than 0.8mm and sump/water tank of 80 liters capacity including sheet thickness not less than 1.00mm with zinc coating not less than 100 gms/sq.meter and all internal surface of steel body painted with water-resistant paint to IS 9862 latest and brass/ss material drain 3 pin molded plug top of 5/6 amps plug ISI marked, 230 Volts, 50Hz, connecting cable with, commissioning complete all as specified and directed.

Supply and fixing of suitable connecting electrical cable for installation and commissioning with outdoor stand grouting of nut bolt, MS angle fixing in existing wall and necessary arrangements for fixing of Desert Cooler complete all as specified and directed.

Supply and fixing of water cooler having gross capacity of 80 Ltrs and nominal cooling of 40 ltr per/hr, suitable for operating on single phase electric driven, 230 volts AC, 50 Hz complete testing all as specified and directed. Make as approved by GE.

Supply and fix of refrigerator, electric dirven (single phase of capacity 300 litres, double door, frost free, star rated suitable for operation on 230 volt AC supply complete testing all as specified and directed.

Supply, installation and testing of split type AC of 1.5 ton capacity, remote control, ISI Marked, 5 star rated, BEE 4.51 rating, cooling capacity 5200 wattage and outdoor unit fitted with hermetically sealed rotary/reciprocating compressor, enviroment freindly Refrigerant/non CFC, copper condenser coil, capable of performing active dehumidifier, Air circulating and filtering including copper tube of suitable size, Insuilation sleeves suitable for operation on single phase electric dirven, 230 volts AC, 50 Hz with connectionup PVC insulated sheathed multistranded copper conductor cable 2.5 sqmm, 3 core duly fitted with a 3 pin plug top 5 Amps and including fabricated factory made angle iron stand mounting to outdor unit with grouting nut bolts complete all as specified and directed.

S&F, voltage stabliser for automatic operation single phase naturaly air cooled indoor type & designed for input between 170V to 250 V with output voltage stabilized at 230 V Accuracy of + 2.5 and capacity 5 KVA including complete testing all as specified and directed. Make as approved by GE.

M/S HARI CONSTRUCTION

Singh Engineer And Contractor

SURESH ELECTRICALS

ALBA AC AND REF SERVICES